Tipped Bed Method! GMC Fuel Pump Swap.
ฝัง
- เผยแพร่เมื่อ 14 มิ.ย. 2013
- Buy a pair of those 90° pliers on Amazon Here: amzn.to/3K6sZil
Tipped Bed Method! GMC Fuel Pump Swap. I innovated this method on a truck that had rusted straps/bolts and bed bolts on one side. I was in a hurry to get it done. Turns out this method works great for when you don't have a lift or you don't want to rain dirt in your face from below. It's not necessary to take the bed all the way off. When you just tip it, it can reduce damaging your bed corners too. - ยานยนต์และพาหนะ
Without your video I would not have been able to of done this. I’m a 61-year-old widow and had to replace the fuel pump by myself in my late husband‘s 95 Chevy Silverado Z 71. Again, I can’t thank you enough for taking the time to post this video.
Holy Toledo thats Awesome you Go Girl🛠
Angel
That's awesome, I love seeing/hearing about people who aren't afraid of doing their own. Work and not stopping halfway through and sending it to a mechanic..sad times when you see fully able bodied men and women standing on the road waiting for AAA to come change the tire for a spare.
Not going to lie I thought that said a 61 year old window and you were making a joke about him being in the way of the camera a lot. But, after reading again, YOU ROCK!!! Good for you (:
Queen
I've used the bed tipping method before when I was younger. My next fuel pump replacement is tomorrow, but I'm much older and cannot flex like I used to. I'm taking the whole bed off this time with a gantry crane. Always wire wheel the rust from the bed bolt threads with a bench grinder and always use never seize on the threads. Make sure to test run the new pump before putting the bed back down.
Been alive 53 years and I've never seen holes in the back of knees. I will adopt that style and give you credit.
did you notice he put the parts that he cut out on the front to act as kneepads? dude is a legend.
ive learned my lesson with fuel pumps GO OEM!
I just did this today to my 03 4.8 regular cab, waaaay easier than I thought a fuel pump swap would be. Thanks for the vid.
Thanks a bunch Brian! Definitely still a tight squeeze to get in there, especially since I needed to replace the connector.. Took me 3 hours laying in the slush up here in Calgary, Alberta! My ass was numb by the time I finished. Saved me a few hundred bucks, real proud of myself -- wasn't sure I could get er done. Runs nice and strong now! My only issue is that I tightened the passenger side down without checking the fit and now the bed is off kilter just a hair. Not enough to be really noticeable but still enough to bug me.. I'll save that for the warm weather.
Used this method last weekend to change the pump in my '87. Soooo much easier than dropping a tank.
Thank you times one million for this video. I got to change my fuel pump this week and this helped alot. Only problems I ran into is the nuts broke their weld on the front 2 bed bolts so I ended up cutting the bolts, the other was the locking ring holding the pump to the tank was a bear, I needed an air hammer. Guess that what happens after 14 years of driving salty Iowa wintry roads.
I just did this on a 2001 Chevy Silverado 1500 after watching your video... Worked like a charm. Took my time and did it on a Sunday and saved myself about a thousand dollars. Thanks😁
One thing I like about this method you can pretty much change the pump standing in a foot of water. sure beats dropping the tank. after 30 years of changing pumps this was the first time today I tried this method, my shop was full so the only place I had to do it was out in the very uneven gravel parking lot, all I can say is no more dropping tanks for me. thanks for sharing.
Thanks I'm doing this job solo for my niece, this video is an important assist to me. This method works vary well!
thanks for the video i did this method the other day on my step sons truck as he just filled the tank. super easy. i wear contacts so it a must to wear safty glasses as i got a face full of dirt. work like a charm, i live in az so we dont have the under carriage build up problem and bolts came right out with a breaker bar and he wanted to help to see how things were done and we got it DONE OVER THERE ON THERE.
I always use two means of support so there's a back-up. The bed weighs about 230lbs I have a 8,000 lb jack stand as a back-up to the board to catch it if needed. Thanks for caring!
I remove all bed bolts except rear two which I just loosen and then raise it like a dump truck..
By golly Ur a purty Fart smeller.
The bumper didn't get In the way?
Just had exactly the same thing happen with an AirTex pump i put in in 2012. Only made it 50k before it started running rough like yours. Used the bed tip method this time thanks to your video. Was able to tilt the bed with a Ranch Hand headache rack and a full set of RKI boxes installed using a floor jack and didn't have any issues.. Put in an OEM pump this time! Thanks for the video, it was very helpful.
ok im doing this this weekend. thank you for the clarity. i tried to watch another one and it wasn't good. yours is the best
Great video, 230,000 and my pump was putting out about 30-40psi. I was not looking forward to dropping the tank. I used a 12 inch long 2x4 and jack stand between frame rail and cross support on bed. This along with removing the tire gave me easy access to the pump. I didn't have the 90 degree pliers but that looks like the ticket to removing the fuel lines. Thanks for the video
Brian...Thank You.
Used your method to change out a 1993 454SS fuel pump yesterday. Went with a Walbro 190lph pump. This was so much easier than dropping the tank...done that twice before on an 87" GMC.
XJj
It's a good trick, and thanks for the 411 Brian. I live in the rust belt, so anything that cuts down my labor time spent.is great helo. Again thanks Brian.
I used your method to raise the bed up to remove the tank filler hose to syphon out some very old Ethanol gas. It worked great. If I ever have to replace the fuel pump I will do the same process.
I had to remove mine today and I don't have the right equipment to do this job nor do I have anyone that could help me with the bed so this video saved me. Thank you Thank you Thank you. Mine is a step side but it still worked perfect. my old pump is an AC Delco and just went out after 12 years so I ordered the AC Delco to replace it. Great video dude, Thanks.
I took my truck to the shop he quoted me $850 to replace $250 for the part and $600 labor because he said it's a 2 man job to remove the bed. With your video it cost me a total of $190 for an oem part. Thank you
I just did this to my 1994 Chevy truck a few minutes ago. I had to remove the two rear bumper bolts and there is a bolt over the front spring shackle that takes a ratchet to get too it. Other then that it was fast and easy. I used an electric impact wrench, a 18mm socket, a ratchet, two short extension, a star or torque bit, and a 2x4. Also mine had a ground wire on the left side rear that we stretched a little trying to lift the bed. Thanks for posting the video.
Also helpful for people that are going to change there crusty brake lines, thanks GM!
Precision seems like a company that has well developed parts. I have not done any research on the brand, but I have installed a couple of different parts produced by them. Haven't had any trouble as of yet. Thanks Again for an insightful video Brian.
For sure!
Thanks John!
Thanks Robert- I meant to do a link you could click on to take you to that other video. Because I say this comment, I fixed it and it's up now. You're the man!
management is so kind and thoughtful
Thanks! Finally somebody that didn't cut a big hole in their bed!! Much better way to change out a FP.
YOU CAN DO IT...YES YOU CAN. I just did. Thankyou for your informative video. I'm so glad I did not have to remove the tank.I hope others learn to post the same type of videos. Just enough dialog...a little humor...steady photography...attention to lighting. If I decide to post mine, it will be less informative but I will reference your post. I like your honesty. Thanks for the education. My day was easier than expected.
Thanks Brian. Now I know how to tilt the bed on my 07 gmc sierra to replace the brake lines....and maybe the fuel pump in the future..
Good job. 👍
great video, glad to get a abit more info on this. so far so good with my original fuel pump but it is 13 years old now and may need replacing soon
Thanks for your video. I just finished replacing my fuel pump with the highly recommended Delphi unit. $177.00 at Carquest. What I did slightly different from you was I removed the rear wheel and inner fender support brace which gave me much more working room to remove and re-install the pump. I recommend the tilt bed method to anyone and my camper shell stayed on but tailgate still needed to be removed for clearance while tilting. I just saved myself $450.00 on labor by not taking it to the mechanic.
Is it Delphi fg0407
I’ve heard guys say right there also, thank you for your video, I think I’m going to try this method on my duramax fuel sending unit
you did a great job.gotta do this this weekend but since i have a car lift ill just lift the whole bed
THANK YOU for sharing this! I followed your advice while replacing the fuel pump on my 2002 GMC yesterday and it was a HUGE help!
I installed a Delphi fuel pump but my lock ring was severely rusted and I had to cut it apart using a Dremel tool with a cut-off wheel before my old pump could be removed. Once I located a new lock ring it didn’t take long before I had it back together and running!
Thanks again!
I am a long time fan and subscriber. I love the old cars and have a 69 Ford Falcon . Thank You for all of your videos and God Bless you and your family.
You, sir...are a LIFESAVER! I am so glad I found your video, this turned a nightmare into a dream! THANK YOU! THANK YOU! THANK YOU!!!!
Nice. Getting ready to install a stronger fuel pump on my tacoma to supply the fuel needed for the new turbo :D
U DA MAN Brian!
I did too! So I made sure it didn't. Fear is only useful as a motivator. So I use it for that- and move forward after making the necessary preparations etc.
Awesome video! Very well done! I've seen where guys butcher their box so they don't have to drop their tank but tilting the bed wouldn't have occurred to me. Thanks a lot.
You're most welcome! It makes my day to know this helped or inspired someone else!
I just learned about this trick from one of the new tech at our shop. he taught me to tilt the bed back like a dump truck instead of to the side. I haven't gotten a chance to try it yet though of course
Thanks man, this seems way easier than dropping the tank.
Great Video! About to tackle this one next week! Funny fact, I went to school with a kid named Justin Case.. lol. Thanks for takin the time to film and share!!
Excellent video. 5 stars.
My niece started humming the Superman theme when you lifted the bed up. ;)
Running the truck with out the fuel pump relay and the gas cap off seemed to help with squirting fuel in my replacement.
you have a awesome daughter lol
Down n dirty welding tips n tricks is an awesome channel!!!!
WELCOME BACK BRIAN I REALLY MISS YOUR VIDS WELCOME AMIGO
Doing it this way you don't have to empty the tank man I dreaded that. Well guess what now my sender is bad maybe I'll put bed back on with velcro LOL Great video
Thank you! This method worked great for me!
I'll have to try it that way next time.
Dude! You're fuckin awesome! You changed that fuel pump like a pro. Good shit man! You just saved me about $1,000
Thanks dude man that was so much easier that dropping the tank.
Brian I did mine by pulling the bed But as far as the bumper & box I used two pieces garden hose , split it then over the end of the bumper .
AIRTEX WAS A GOOD PROUDUCT 30 YRS AGO,GOOD JOB BRO''
I have Chevy 1500 and will be doing the pump this way thanks for posting.
Read a few comments and they all made chuckle. A few things:
1. Your jeans are hilarious and ingenious at the same time.
2. Airtex being featured on ETCG and your opinion made me laugh.
3. I love how all the youtube car channels are interconnected with each other.
you make that look so easy. I've had bad luck lately trying to remove beds, broken and stripped bolts and broken and stripped sockets.
i got 2 broken bolts and 1 good one i,m looking at on my tablei know i have at lease 3 broken ones so its green bottle time for today not as strong 65 yrs old
I've got a nbs 99 Silverado, and have done 3 pumps on it in the last 12 years. I have tried bed tilted as you show, bed off completely, and dropping the tank. I actually think dropping the tank is my preference now. It was at least 30mins faster in my opinion. Plus, you gotta admit, it's pretty nerve racking sitting between the bed and frame no matter how well you support it ;)
CRAP! Just put an airtex in my Grand Prix... Thanks for the video and the tilting bed idea!!
Not a bad idea. I've never had sparks from that, but I like the thinking.
Thank enjoyed your video, I think the tilt bed method look easier than dropping the tank. Love your shirt got one just like it.
Thanks
Worked great... was able to knock this out in my driveway in about an hour from start to starting the truck. Thanks!
Way to go buddy! You're welcome!
I did the same... Works great !!!! Thanks !
you welcome amigo
Lol awesome method!! Your humor is also a great addition!!
Thanks a million! My fuel pump just went on my silverado and I'm gonna go after the repair tomorrow morning. Going to try the tilt bed method vs dropping the tank. Looks alot easier
Was it a 2000 by chance? Mine's there too, I see a few recent comments lol.
Chubbza5 mine is a 2000 and 120,000 miles. Debating to do it myself
@@Drink6up it worked slick. New pump had an upgraded wire harness than I held to solder together but it was all much better than the old school dropping the tank method.
Thanks Pete!
Where exactly did you sit the jack stand ?
Cooling and padding for the front of my knees. I call them my "hot pants" they turn heads and I wear them in hot weather. I'd wear shorts, but my knees would get tore up.
Great info. No surprises. Thanks.
thanks, I hated dropping the tank on my 90 Chevy K2500, so will try this method next time
Awesome work, thanks for the very clear and informal videos. (Commentary is icing on the cake)
Thanks Chris! And you're most welcome!
Well done!!!,just wait for my to came in,for Chevy 95,good video ,also aim going to try same tipped bed style pants,Thanks,Cervesa Helada y Salud!!!
just did mine today a lot easier than dropping the tank
Awesome video and great details as to what to do no skipping of steps. Like the how to'your doing keep it up!!!
I watched a guy replace the fuel pump on his 2000 Silverado by taking the bed off, but he had a tractor to lift it straight up with straps. Worked great, but this method looks just as good.
cool idea, thanks for all the how to's
thank you very much for showing that video it's going to help me a lot actually my mechanic put a new pump he left it loose he came in tight the pump he broke the pump the wiring or something no I have to do it myself cuz he wanted to charge me again for making my own pump so that's kind of like no good but with this video I can do it myself now and not paying paying nobody again for a fuel pump thank you very much
Broke my heart for sure!
briansmobile1 Well I watched your video on lifting the bed, I have a gas leak coming off the pump so I'm going to try lifting the bed , we will see how it works out for me
the tipped bed method works great, and is pretty easy with the right equipment. i back my truck into the my garage and use a commercial ratchet strap (used to secure cargo on semi's) to lift it from the rafters then block it well for safety. 2001 GMC 2500HD the pump goes out about every 2-4 years. i refuse to cut into my bed but thats just me.
Does this method working for replacing rear brake lines as well?
I just replaced the fuel module on my 2010 Silverado. It lived 12 years in Chicago’s salty winter roads and everything around the fuel pump was very rusted. I was able to completely remove my bed and thank goodness I was able to. I don’t think I could have done what I needed to do with the bed just tipped.
Sheesh! Imagine if somone invented something better than perchlorides that didn't eat cars. There's a multi-million dollar idea/patent.
Man Just did mine and Just removed all 8 bolts was the easiest way to do it the bed moved back and quick work super easy
Man you got it together....After watching the one with the box removed ....you made it look so easy!!!! thank you!
Thanks for the video you saved me a lot of time and money
Lol! Justin and the Case family... right on! Thank you for the upload!
thanks for the video
Great job and explanation !!! live and color from here.thanks again
For everyone out there, don't make my mistake. I had my pump go bad in freezing weather. On top of which I was traveling to a dif state. So I did all the work in AutoZone parking lot laying in the snow and freezing weather. So before putting truck bed back on and reinstalling, of course I'd test it. But didn't work and I went thru about 4 brand new pumps, including having to rewire a couple. It was super bowl Sunday and I was late, I was fkn pissed- of all days it had to be. Finally a guy passing by asked me "if I had the ground connected" to the bed frame or panel by gas nozzle. Nope. Totally didn't realize I needed it connected. I thought it was for electrical surge protector. Started right up. Just a simple wire coming from an area I didn't think important caused me so much grief. So don't forget about it and be sure to connect the ground wire. In Silverado the wire that comes by the gas inlet tube.
Yes. And the middle one has a different means for securing.
I thought Brians idea was slick but yours is a definite try on my next one.Thanks
mr brian you are the best
Awesome plan
GOOD IDEA GOING TO USE THIS METHODTHANKS
I can see I'm going to have to do a vid on that. Stay tuned.
I thought that might be appreciated by all.
its work your idea thanks dude .
i know what u mean.. shit drives me crazy too...
we have 2001 1500 with 64k and the fuel pump crapped out 2 months after i bought it...
this video helped.thanks
I've tried the bed off and tank drop methods, from the looks of your video with just tipping the bed, holy sheep shit Batman, that is a helluva lot easier!!! Will be trying this very soon!!!
Great job!
All you have to do is remove the rear wheels, unbolt the bed, Remove the rear bumper brackets from the frame and slide the bed back a few inches. That's how I changed mine on my Chevy when it was 20 degrees outside. It beat laying on the cold ground.
Do you have a video using your method?
@@fotomemoria No and why would a video been needed when I explained it