Unbox & Install - Lumenier AXII HD 2 Patch and Stubby Antennas for DJI FPV Goggles
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Here's a what the new Lumenier AXII HD 2 DJI antennas look like out of the box and how to install them (it's super easy, barely an inconvenience). BTW, these are the V2 DJI FPV Goggles. Not sure if there's any difference in the fit for V1 goggles.
I bought mine at PyroDrone pyrodrone.com/...
But if you're going to buy from Amazon anyway, use my link to support this channel:
amzn.to/3GVQx5r
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwi...
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam - วิทยาศาสตร์และเทคโนโลยี
![☀ Большой ТЕСТ антенн для DJI FPV видеосистемы [DJI FPV Antennas Test]](http://i.ytimg.com/vi/yNMMQkyqfRE/mqdefault.jpg)
![☀ Большой ТЕСТ антенн для DJI FPV видеосистемы [DJI FPV Antennas Test]](/img/tr.png)
What up my man!
V1 goggles patches on bottoms
V2 goggles patches diagonally
For best penetration and range
Interesting. Why is this?
@@RCwithAdam1 on the v1 the Omni Stubbies being higher will help with range of those Tx/rx antennas. The patch on bottom will be able to utilize the bottom left Rx only antenna for range.
V2 too right and bottom left allow for two Rx only antenna with at least one Omni stubby up high.
@@vectorsharkmedia5959 when worn. RCShimm did some testing awhile back and that is where I saw the performance. Two different videos if you take a look.
For SURE not! V2 stubbies always on top.
I'm glad I saw your video. I have the AXII HD2 on DJI FPV Goggles v1. I sold it last month. I just bought a DJI FPV Goggles V2. I want to buy an AXII HD2 again but I wasn't sure if it will fit the V2. Your video proved it is compatible.
Looks like they followed the logic behind iFlight’s design.
Looks very similar in contruation with iflight crystal. Price also somewhat same. Now have to see performance
I'm having a hard time deciding right now which one I should buy, AXII HD 2 or iFlight Crystal HD Patch. What would you recommend?
Iflight crystal for me is the preferred antenna upgrade.
I just don't like the clear plastics.
Agreed but I ended up snagging mine for $36 on sale otherwise I would have preferred the carbon pattern. Maybe I'll wrap them or just spray black as I was forced to get the clear orange(again price).
Nice axii, can you also share what's the brand of the printed facial foam from your Dji goggles?
My guess is that the open space inside the goggles is to enhance airflow for proper cooling.
These won't work with dji fpv drone ay. Single band
Is there a company that manufactures a dual band set? anything you recommend?
If I use this setup with 2 original stubbies on the v2, would I be good for both Avata (needing 2.4 + 2.8) ánd fly my other vista/AU rigs???
Spray paint it mat black
I think that might interfere with the antenna reception.
@@RCwithAdam1 as long as there's no metallic substrate in the paint no it shouldn't attenuate signal.
Cuanto de rango tendría con esa antena?
Just think adam if you calibrated your drone in at an angle leaning forward it would go forward in angle mode like an x-wing in rogue leader video game . But boune back to constant forward pitch
Do I need this for flying inside building and behind walls. I will fly slowly, Will I need this ?
right dude! I agree with you on the colors. right away I thought damn this would look awesome in purple. something similar to the Gameboy Color atomic purple. Hope the new gear has been working out for you. 🍻
Nice Video! Installing mine today. Question, I really like your foam padding. Where di you buy it? Link by any chance? Thanks
Thanks. I made it myself. I need to make a tutorial video for that.
tem o link desta espuma do rosto. ?
Just got them noticeable difference great video
what foams are you rockin they look killer
Gave a thumbs up at exactly 2 seconds for getting straight to it. Wow. Blown away. Other TH-camrs should learn to follow this practice
Thanks for the feedback!
no test?
Not yet. I'm not really set up for long range testing.
Yet here I am, bought orange 😂
It's good for DJI Avata? Thanks
I haven't tried it, because I don't have a Avata, but I understand that they are compatible with the Avata.
There's your problem . The white clog blocking inside the metal cover . They probably thought no one would ever look . I would try a fork first to scratch less digging it out .
What white clog?
@@RCwithAdam1 2:15
The new versions are so ugly though.. I don't like any of them. I'll stick with iflight crystal
fair enough. that carbon fiber does look good.
Does it affect the performance, if you have sticker on it?
100% not. How would it?
how happy are you with the performance of this setup?
Yes! I love the low profile of the goggles. Range has been fine for me as well, but I've only flown maybe 1/4 mile with some tree obstructions.
@@RCwithAdam1 Appreciate the response
It's really helpful ? And fly more range ?
Helpful only for 25-200mw. But you can switch power up to 700-1200mw and fly with stock. Stock 1200mw easy penetrate up to 5-6km in field for long range. Usally I use 700mw. Fly with stock.
Looking good 👍
thanks paulie
Where did you get that foam padding from...
I think the foam came from a set of desktop speakers (for vibration isolation or something). It is nice and soft and compresses easily. I used Super 77 adhesive to attach a cotton bandana over it. It's the best goggle foam I've found!
@@RCwithAdam1 how did you attach the bandana foam to the goggles, was that adhesive too?
@@frankieVeee actually it just kind of grabs onto the existing hardsided velcro.
V1 or v2 googles?
V2 goggles
@@RCwithAdam1 puedo usar axii hd 2 en mis gafas dji v1?
Here's a weird idea stick the AXII V1 onto the V2 would you get better range