You're most welcome! Aniways currently im using CNHL batts and they have been great. U cant go wrong w Tattu, but they come at a premium price. Also have bros recommending Ovonic, but havent used them myself. Go for high discharge rates. For my kit, im still on 4S setup so i look for at least a 100C batt. No HighVoltage batts pls. They give the most power, but die fast. Use for afew races, then throw away type 😅
Sorry Im not familiar with remote id. Hope other FPV bros have helped you out on this. But yes, you will require a DATA usb cable connected using the dongle to phone. Fly safe, and see you in the skies!
How you charge dji batterie? Through usb cable just with normal ad adapter? May i plug it just with usb direct to pc or should i always use ac adapter? Und which ac adapter reccomends you? Thx
Using a normal 5v2a phone adapter is fine and ideal. I charge mine that way. Charge times will be similar. Not recommended to use basic 5v1a plugs. Not that its dangerous, just that it takes too damn long 😅. Whats dangerous is those high power VERY fast charging phone adapters that output something like 9v4a. Thats gonna fry e charger.
Sorry i missed this. Here is the battery: s.click.aliexpress.com/e/_DkQJfz7 But personally im not using it to power the goggles as it has lower capacity and id rather be using the original batt that clips in at the back. But of coz thats a trade off for weight. The original batt and clip is heavier than this Eachine batt, but I use it as counterweight for the goggles by having it at the back.
the iflight Strap is great, because of the clips that come with it. but the strap itself is "too soft" easy to slide off if you have the googles not above your eyes. the ehtix HD strap is better (but the V1!!) its however hard to find this days.
@@TheReelRahim yeah i'm rocking the iflight ones too, just need to be careful if the googles on your forehead they slide off really easy, and. the strap looses itself over time i fixed this with a big safety pin behind the clip :P problem solved forever ;)
Still too early. Luminier makes a nice eyepatch and stubbies combo, but its only on 5.8ghz, meant for the Air Unit/ Caddx Vista setup on DIY drones. Our DJI FPV uses both 5.8ghz and 2.4ghz, and thats what the stock antennas are tuned for. So im leaving it at that until there are more options out there. Some brands are alr creating them, but they are mostly patch antennas that stick out like muffin pans 😅. I wanna have a clean look, like Luminier's setup for Digital. PLUS an analog receiver module kit integrated 😏
Im afraid it wont. It was designed for mainly DIY fpv use. Only Goggles V2 and FPV Goggles 2 will work with the Controller 2. But I may be mistaken as I have not had to deal with Goggles V1. Do let me know here if u get a chance to try, so we can help others too.
Hi, I have a question, would it be still possible to fly the drone in normal & sports mode if the throttle stick is not self-centering for manual mode?
Great of u to ask. IT IS POSSIBLE. I did that when i started my first few test flights with the DJI FPV. But it got difficult for me. Because in N and S mode, left stick is altitude adjustment. So its ok to keep centre. But in M mode, left stick becomes throttle, and i dont want to keep fighting with the sticks. Even as i cruise around, left stick is not centre, and im always making micro adjustnents. So i dont want that centre-ing of the sticks and the spring resistance. Hope this explains it.
Glad it worked out. F2 to fully loosen, then add F1 to your preferred friction feel. If u plan to fly Manual most of the time, once awhile go back to N or S jist to get familiar w the different stick feel. You'll do alright 🤟🏽
If i was going for my first upgrade, id get the battery clip. What's your pick?
thanks for sharing!
Is there a STL for a 'fatstrap' ??
No prob 🤟🏽. See u in the next one!
Im sorry, not sure what to lookout for as i dont do 3d prints 🙏🏼
Thanks for the reos
You're most welcome!
That foam looks just what I need after trying something off AliExpress, just hope they reply and tell me if it’s stock or not etc.
Im still keeping a lookout for something similar off Ali. As long as its foam covered with cloth on the outside, then its a good match.
Thanks bro
No problem! More 'poison' coming up 🤟🏽
nice and thank you for the recommendations! I was wondering what lipo batteries do you recommend for the luminier custom drones?
You're most welcome! Aniways currently im using CNHL batts and they have been great. U cant go wrong w Tattu, but they come at a premium price. Also have bros recommending Ovonic, but havent used them myself. Go for high discharge rates. For my kit, im still on 4S setup so i look for at least a 100C batt. No HighVoltage batts pls. They give the most power, but die fast. Use for afew races, then throw away type 😅
I have a Fat Shark strap but I need to get some new foam.
Try it out! But note that the strap may need a different mount. An open-loop bracket may be what u need. Let me know how it works out 🤟🏽
@@TheReelRahim my strap attached easy no need to screw it in.
As long as it fits well and does e job right, its time to get back in the skies 🤟🏽
What about remote id?? Doesn’t it require a cable from goggles to phone? It does here in the USA
Sorry Im not familiar with remote id. Hope other FPV bros have helped you out on this. But yes, you will require a DATA usb cable connected using the dongle to phone. Fly safe, and see you in the skies!
How you charge dji batterie? Through usb cable just with normal ad adapter? May i plug it just with usb direct to pc or should i always use ac adapter? Und which ac adapter reccomends you? Thx
Using a normal 5v2a phone adapter is fine and ideal. I charge mine that way. Charge times will be similar. Not recommended to use basic 5v1a plugs. Not that its dangerous, just that it takes too damn long 😅. Whats dangerous is those high power VERY fast charging phone adapters that output something like 9v4a. Thats gonna fry e charger.
hello can you tell me what battery is? the one with the integrated cable?
Sorry i missed this. Here is the battery:
s.click.aliexpress.com/e/_DkQJfz7
But personally im not using it to power the goggles as it has lower capacity and id rather be using the original batt that clips in at the back. But of coz thats a trade off for weight. The original batt and clip is heavier than this Eachine batt, but I use it as counterweight for the goggles by having it at the back.
the iflight Strap is great, because of the clips that come with it.
but the strap itself is "too soft" easy to slide off if you have the googles not above your eyes.
the ehtix HD strap is better (but the V1!!) its however hard to find this days.
IKR! Had many mention its great! Just not something u get off the market pre-loved. 😅Hahahaha. Settling for these for now.
@@TheReelRahim yeah i'm rocking the iflight ones too, just need to be careful if the googles on your forehead they slide off really easy, and. the strap looses itself over time i fixed this with a big safety pin behind the clip :P problem solved forever ;)
Oh i get it now! Ok will look into that sliding issue. Thanks for the tip!
very nice content im with You since two months :)
Thanks for the support! Will have more content coming, so stay tuned! See u in the skies!
Cool video bruh. Interesting setup for your goggles. I see you now have the lens cover HAHAHAHAAHAH
Hahahahahaha. Yah bro. Cant bear to go through another 1 mth downtime 🥲
@@TheReelRahim ROFL
what about some upgraded antennas for the V2, recommend any ?
Still too early. Luminier makes a nice eyepatch and stubbies combo, but its only on 5.8ghz, meant for the Air Unit/ Caddx Vista setup on DIY drones. Our DJI FPV uses both 5.8ghz and 2.4ghz, and thats what the stock antennas are tuned for. So im leaving it at that until there are more options out there. Some brands are alr creating them, but they are mostly patch antennas that stick out like muffin pans 😅. I wanna have a clean look, like Luminier's setup for Digital. PLUS an analog receiver module kit integrated 😏
@@TheReelRahim yea, I saw true RC and luminier has the dual antennas for sale , but I would wait for your review , if and when you do one.
Looking forward to do it too. Just waiting for the right one. Still gonna keep with the compact look of the patches and stubbies
does fpv goggles v1 work with controller 2?
Im afraid it wont. It was designed for mainly DIY fpv use. Only Goggles V2 and FPV Goggles 2 will work with the Controller 2. But I may be mistaken as I have not had to deal with Goggles V1. Do let me know here if u get a chance to try, so we can help others too.
the battery is compatible with gloggles v1 ???
Finding out from other pilots. Will get back to u soon ✌🏽
Yes, u can use the V2 batt kit on a v1. Simple, cleaner, included power switch.
Hi, I have a question, would it be still possible to fly the drone in normal & sports mode if the throttle stick is not self-centering for manual mode?
Great of u to ask. IT IS POSSIBLE. I did that when i started my first few test flights with the DJI FPV. But it got difficult for me. Because in N and S mode, left stick is altitude adjustment. So its ok to keep centre. But in M mode, left stick becomes throttle, and i dont want to keep fighting with the sticks. Even as i cruise around, left stick is not centre, and im always making micro adjustnents. So i dont want that centre-ing of the sticks and the spring resistance. Hope this explains it.
@@TheReelRahim ahhh just tried it in the simulator and i know what you mean. Thanks for the reply and keep up the great content man!!
Glad it worked out. F2 to fully loosen, then add F1 to your preferred friction feel. If u plan to fly Manual most of the time, once awhile go back to N or S jist to get familiar w the different stick feel. You'll do alright 🤟🏽