Fantastic video. Iv always wanted to have a go but confidence has stopped me. Thanks mate you just gave me that to have a go myself. Going to follow youe video and get some of those 3d printed vents.
@@MendItModIt yeah definitely make it look so much better. Holding up well so far. Mine came out the same as yours with the grills really glossy and the other bits not quite as good but I’m really happy with it for a diy job. The sanding and prep took me ages to do.
@@MendItModIt definitely mk5 I’ve had 1,2,3 and currently mk7 the mk 5 is the fiesta I always wanted but some reason I opted for the focus st170 instead
@@MendItModIt I found out it's a Gen 5 (like you'll see it listed on ebay for parts 'Fiesta V') but also a MK6. So it's both but the terms get confused. Google search "wikipedia ford fiesta ST" was a pretty interesting read.
@@MendItModIt its because they don't acknowledge the facelift mk4 as being the mk5 so mainly European countrys call it the fiesta 5. Where as we have the mk4, mk5, mk6, mk6.5 (facelift) mk7, mk7.5 (facelift) and mk8
Good job there. Best to apply a plastic primer and a hard clear coat. I need to do this on my black zetec S. I'm thinking I might tell my dad to do it as I have no spray painting experience
Looks so good in black. The thing I have left to do is the lower grill. Do you have to remove the whole bumper to get it off, or can you just Jack the car up & push the clips out that way?
Yeah it makes such a difference. You don’t have to remove the bumpers no but most of my arch liner clips/screws are missing so it was only 3 bolts each side for me so took less than 5 mins to remove the front bumper. The back you would have to drill out the two rivets to remove the bumper but should be easy enough to remove the diffuser and reflector surrounds with the bumper still on. 👌🏻
I have a mk6 1.25Z .My fog lights look the same as the ST "but" there's no screw to release...How can I pop them out ...? Is it attack from under the bumper..👍
Oh I wouldn’t know on the other models but if there’s no screw I’d guess it’s clipped in from the back somehow yeah, might be a bumper off job, but then just take the bumper off regardless cause it makes things so much easier
@@alanpercival6428 I’m pretty sure they do, got a mate with a 1.25 that has the full ST kit on, I’ll message him and let you know if he had any hassle with it
Yeah it just made life a lot easier to remove them for me, some of the clips can be a pain 😂 most of my arch liner clips/screws are missing so the front bumper was only 3 bolts each side and the rear was already missing the rivets so it only took me a few minutes to remove the bumpers.
I see a lot of people on youtube make a lot of fantastic mods to the car , buth please start to clean the rusty things on youre car mate . I,m at the moment bizzy to paint and sanding al the parts behind the lichts , bumpers an behind the weels. After this i start instal my mods . Every one his own style only saying ✌️✌️ thanks for you video's man i learn a lot from you al in the UK . In the Netherlands are not that much people on youtube
Looks brilliant 👏 autoglym headlight restorer is really good if they need doing. Made a huge difference on mine
I’ve got a kit off Amazon which I’ll try but if they don’t come up too good I’ll give the autoglym a go 👍🏻
Fantastic video. Iv always wanted to have a go but confidence has stopped me. Thanks mate you just gave me that to have a go myself. Going to follow youe video and get some of those 3d printed vents.
Good job on that man! Giving me confidence to do it on my own car now
Looks amazing bro, gonna do the same thing to my mk6 Zetec S
Looks good mate makes such a difference. I did mine a few months ago.
Definitely mate, how are they holding up?
Top job great content thanks for sharing
Cheers mate
would you be able to take the plastics off without taking the whole bumper off?
Yeah you can
Smashing it as always mate, can’t wait for that DIY wrap, 1000 subs best hurry!
Thanks man, can’t wait have a go at wrapping 😬
I was thinking of doing this but worried about the paint coming off if I jet washed it, Is this possible?
Good job mate looks good!
Thank you buddy
Professional job 👌
Thanks man, not bad for rattle cans 😁
Looks good but one recommendation if you do any wiping with panel wipe or painting always wear nitrile gloves
Looks good mate I’m going to do it on mine in the summer.
They make such a difference mate well worth it 👌🏻
@@MendItModIt yeah definitely make it look so much better. Holding up well so far. Mine came out the same as yours with the grills really glossy and the other bits not quite as good but I’m really happy with it for a diy job. The sanding and prep took me ages to do.
Good job mate, I know we do our mk7 ST’s but this is the first time I’ve seen the mk5 done well done 👍
Cheers mate. You call these a MK5? I’ve heard them as a MK5 and a MK6, makes it so confusing when trying to buy parts 😂
@@MendItModIt definitely mk5 I’ve had 1,2,3 and currently mk7 the mk 5 is the fiesta I always wanted but some reason I opted for the focus st170 instead
@@MendItModIt I found out it's a Gen 5 (like you'll see it listed on ebay for parts 'Fiesta V') but also a MK6. So it's both but the terms get confused. Google search "wikipedia ford fiesta ST" was a pretty interesting read.
@@MendItModIt its because they don't acknowledge the facelift mk4 as being the mk5 so mainly European countrys call it the fiesta 5. Where as we have the mk4, mk5, mk6, mk6.5 (facelift) mk7, mk7.5 (facelift) and mk8
@@djmandrick I’ll take a look, thanks 👍🏻
Good job there. Best to apply a plastic primer and a hard clear coat. I need to do this on my black zetec S. I'm thinking I might tell my dad to do it as I have no spray painting experience
It looks so good 😀
Thank you 🙏🏻
Looks so good in black. The thing I have left to do is the lower grill. Do you have to remove the whole bumper to get it off, or can you just Jack the car up & push the clips out that way?
Yeah it makes such a difference. You don’t have to remove the bumpers no but most of my arch liner clips/screws are missing so it was only 3 bolts each side for me so took less than 5 mins to remove the front bumper. The back you would have to drill out the two rivets to remove the bumper but should be easy enough to remove the diffuser and reflector surrounds with the bumper still on. 👌🏻
Do I need to sand and prime the 2 grills as a fair bit of paint has came off or is it okay to just spray the black gloss straight on
Hi is it easy to get the rear diffuser off . Thanks Phil
I've done virtually the same to my 1,25 zetec,. But I'm looking for the rear bottom grill with the half pipe for the exhaust..
The cut out you mean? Not sure what the bumpers are like on those but they might do one, if not, cut one out 😈 then sand it smooth and paint 👌🏻
Nice one mate 👌👍
Thanks buddy 👍🏻
I have got an mk7 Ford Fiesta 2011 that is black and has a colour code that is D9. does it matter what black spray paint you use?
I know I’m 3 years late but does anyone recommend what grit sandpaper to use
Can you tel me youre sanding paper nr?
Did color fall off in a year?
Nope still perfect bar the odd stone chip
Can u tell the speay product and how to buy them
I have a mk6 1.25Z .My fog lights look the same as the ST "but" there's no screw to release...How can I pop them out ...? Is it attack from under the bumper..👍
Oh I wouldn’t know on the other models but if there’s no screw I’d guess it’s clipped in from the back somehow yeah, might be a bumper off job, but then just take the bumper off regardless cause it makes things so much easier
I'm thinking about getting an ST bumper do they fit a standard mk6 ZT (late)56 reg
@@alanpercival6428 I’m pretty sure they do, got a mate with a 1.25 that has the full ST kit on, I’ll message him and let you know if he had any hassle with it
@@alanpercival6428 front and rear bumpers are a straight swap mate. Only things that need extra is the side skirts, they’’d need sealing on
How does it look after some time? No sun fade or cracking?
still looks great, some stone chips here and there
@@MendItModIt cool to hear that, i consider paint mine
Link to the paint and primer?
Era en color mate bro, yo tengo uno y se lo hice en mate quedo como original. Saludos desde México 🇲🇽 😉🖐️
How long did you wait in between priming and painting?
About the same amount of time as I left between coats of either 👍🏻
To get the best pro glossy look finish it with 2k coat.Nice fiesta i got mk5 only red need to paint the bumpers 😂
Yeah man the 2k stuff I’ve used on other things since is next level, even in an aerosol 😳
@@MendItModIt yeah sure i also did restore my old headlights with 2k coat.Only need to practice before u apply it.But the results are awesome.
You can do all that without taking the bumpers off mate. All can be clipped off or out
Yeah it just made life a lot easier to remove them for me, some of the clips can be a pain 😂 most of my arch liner clips/screws are missing so the front bumper was only 3 bolts each side and the rear was already missing the rivets so it only took me a few minutes to remove the bumpers.
How did you take out the like plastic bits where the lights are and the rear reflective bits ?
I see a lot of people on youtube make a lot of fantastic mods to the car , buth please start to clean the rusty things on youre car mate . I,m at the moment bizzy to paint and sanding al the parts behind the lichts , bumpers an behind the weels. After this i start instal my mods . Every one his own style only saying ✌️✌️ thanks for you video's man i learn a lot from you al in the UK . In the Netherlands are not that much people on youtube
Plastic primer a must will flake
Great channel :))
Thanks man glad you’re enjoying it! (Sorry it’s taken a month to reply) 😳
Didn't sand in all the grille diamonds or prime. Bring on the flake !
No one is gonna sand all of those 😂 it’s holding up just fine 👌🏻
Good car is ford fiesta