วีดีโอ

hi, have you found good electromagnet? i need something for wireless push/pull and have found your video

bro had a beer and having fun zero pi.. 🍺 😂

Thats not a battery. That is capacitor. Powered by capacitor

Great video! Very helpful, thanks!

there could be many reasons such as current, temperature and many more

how much current did you passed?

I've seen others use a blob of blue tac to hold the board steady

Need these for the summer heat

I think putting it over that lettering is messing with the suction. Should probably have flipped it over and done it on the smooth interior

Does the fake charger affect the battery life?

Thanks for not editing this too much! I feel like a bot when soldering, but you seem to solder just fine and also fumble the materials a bit. This makes me feel like I can do this as well, and now I have. Thank you for the motivation and the clear explanation!

So, my question is, when i put the pins in, do i need to like cut them shorter or just not push it in all the way? Cause mine pertrudes more on the soldering end... or did i get a wrong size or something? Hopefully this can be answered relatively soon 😢

Little bit oldish video, but I want to say big thanks, this saved me from lots of frustration with programming 12f629. First, I needed to get one of these janky clones, because there is apparently a bug with T48 programmers/software and 12f629 and it isn't possible to program it currently on those. I also tried with one old RS232 JTAG programmer, but that also failed. So project was on hold when I waited one of these clones and adapters to arrive and today I got one. I got the same type of voltage errors, but thanks to you it was a breeze to solve!

Can you please assembly it back, it’s quite interesting

I bet the magnetic field N and S are both on the front (one pole in center, another for the metal shell. So the field doesn't reach out very far. They actually make magnets like this so the field doesn't penetrate much.

THANKYOU

If it's faded only when powered off completely and then recovers when it's longer in the power socket, this should indicate a condensator problem?!

dude! I cant thank you enough, you were so detailed and still helping after 6 years! Thank you x100 times

What current set do you have ?

Can the alarm be turned off and the hourly announcement turned off?

Вот это поворот. 😮 Спасибо . Буду чинить по вашей инструкции.

You might want to learn about it before you start reviewing thanks for wasting my time Dr penis

hello, anyone know where to download the software?

Can you make a video on how to hook a switch to it

Did I fix it?

It got damaged since i supplied 12 volt supply which part need to be replaced

20$ you expect great output, since it is chine.... how much you will pay for your western supplier may be 100$+ , when things are available cheap people take it granted. give china 100$ they will give better than your best.

Great video, can you tell me what camera you are using or did you use two different cameras?

dude this is great thanks for sharing this!

I had a couple of this back in the 80s

Great video, 6 years later u still helping people.

Amazing tutorial, thanks a lot! I think I did a great job, solderings look really good, just really thin tin coverings on the pins. I felt that it is important to really have that 370°C, then just touch the pin, not the board, just touch tin on the board-pin connection and it immediately attaches nicely. The first two attempts did not work so nicely, because my soldering iron was not hot enough - ** I believe a hot tip really is key**. First time soldering two Pi Zeros and it took me roughly 5 min per board.

you should make sure that power source is enough to power the labeled spec

followed this tutorial and it broke my pi

China made products are Shite... I bought the same electromagnet for my engineering project and god these are bad They say lifting force 5kg and can't even lift 200g So now I m defo gonna fail it Hope no one buys these

If you use a 5v power adapter the lights keep on, to revers the projection just turn inside the frame of the projector ( lift up and turn 180 degrees and push back in the 4 legs )

That was really helpful, thanks.

Good Job :) Thx

I tried with a wide tipped soldering iron and all I can say is that my Pi is traumatized.

could I make a jammer with just those two little pieces and a circit

Nice to hear your voice again. Hope you are doing well.

How much of this 2pcs

Thank you! Solved my problem! In my case the controller-side as said before was corroded by the glue!

The ethernet module uses the SPI interface/bus, he never explains this. Also, be sure to add an AS1117 (3.3v to 5v booster breakout board) so that the board can draw a bit more micro-amps, it really needs about 200 micro-amps to work consistently at load. Will it work at 3.3v, yes, but if you push the module, it will error out. The AS1117 uses 5v in, GND, and out is 3.3v... but the 3.3v it returns has a higher micro-amp capacity then the 3.3v direct from the Pi GPIO 3.3v pin.

This was helpful, thank you.

Just another piece of trash.whats the use of this when we all have smart phones already

I need this for Amsterdam biking, coz pedestrians and other bikers are deaf, totally. How can i use it for a bike?

what is the name of the chip please

thank you ive been pulling my hair out.. i never had power from tool selected

Hi, would you still have the software for this sphere. I have lost my copy and can't find it anymore. Thank you.