today I was was wanted to sublimate on a stretched canvas from Walmart. I used my griddle to set the ink powder on the DTF film. While my griddle was still hot at 358 degrees I taped the picture to the canvas and turned it upside down on the griddle and wieghed it down for 40 secs. the results was fabulous. When it cooled I pulled off the DTF sheet and the print was perfect.
I just found your personal channel -- seen you on the DB channel before. You were under another video I was watching this afternoon and I wanted to see what you had for the DTF on regular printer ink. Glad to be here!! ♥
I am 67 years old and just found your channel. I just bought a printer, heat press and sublimation supplies. I will be adding these items to my order. My granddaughter and are going to try and start a home business. Thank you for these wonderful hacks.
This video is really irresponsible by not using any PPE. You should use some latex or nitrile gloves when touching the powder, and a dust/painters mask, and goggles. The fine particulates are dangerous when airborne, and if you breath them in, congrats, you now have plastic in your body forever. The powder also off gases when heating up. She has no fume extraction at all. Those VOCs are in the air, not safe to be breathing for long periods of time. Look up Brother Earnest if you want to know more about the dangers of dtf powder. Sadly, he is currently battling cancer that has been confirmed to be caused by years of being exposed to the dtf powder and not using safety measures. He showed his endoscope video and he had powder caked on his esophagus. Not trying to scare you, just be safe.
@@pixelbat What are you talking about? She has a silent vent system in her craft area. And as she told you the DTF powder that she is using is made for low vent areas
@@EB.80 like 99% of dtf powders being used are marketed as TPU, which just means thermoplastic urethane, it's fine in it's sold cured state. What they don't tell you is it's made from a polyester resin, which when heated up can release small amounts of styrene monomer which is not safe to breathe, especially over a long period of time. If she is using a ventilation system it won't help since you need to extract at the source, and I didn't see a fume extractor there. They literally make fume extractors specific to dtf printing now. And the powder is even more dangerous in it's airborne particle state, not gas. When you're coating your transfer and moving the powder around, some of it gets kicked up. This is why you need a dust mask. If you breathe the powder in as a particulate that is micro plastic that will never leave your body. Can choose to be ignorant, or be safe. Up to you 🤷♀️
Hi, I just jumped over from the Design Bundles youtube page. I just bought dtf powder, blanks and even a swingaway heat press. Now I need to learn how to use them! Thank you for the great tutorials!
I really like u you are a breath of fresh air especially with the social media platform having so much crazy content on them u make my day so thank you
Love love love your videos, sooo much info and way better than other videos where you do the hacks tutorials and show the results all in one video rather than stretching over 2 or 3 videos. Thank you you’re awesome!!
I have watched you for so long! When I have trouble or in a rut I can always turn you on and watch to be inspired! I'm so thankful for you! I was a design bundles member for about a year. I just couldn't afford a monthly payment and pay for designs. I miss it so much. So many great designs! I personally think your site has the best images etc. I encourage anyone who can to join. I love canva as well! You are a great instructor.
I coat "twice", once a few times back and forth sideways (horizontally), and once a few times up and down (vertically). This has really helped me not have any missed spots.
Another thing I found online about DTF powders is: It is recommended to always use proper protection, including gloves, eye protection, and the proper mask or breathing apparatus when working with DTF powders, as they can become airborne in the coating process. Businesses should not risk inhalation of the powder or extended skin exposure. Additionally, make sure that excess powder does not spread and contaminate other items during the powdering process.
I wondered about this. My cats were in my office when I was doing this and I noticed when I poured, some powder hung in the air for a second or was left on my table, which they walk on. Not taking chances after this! PPE , cats closed off from coming in & thorough clean-up! Thank you for sharing!
This channel is wonderful. I stumbled onto it while searching for sublimation videos because I am going to try to restart a clothing business I had started back in 2008 but had to scrap for various reasons. Back then the sublimation printer was brand new and super expensive and I didn't know you couldn't use it on 100% cotton and I had already bought hundreds of blank cotton shirts and..... just a whole mess. But seeing all these cool hacks and what not, plus the fair pricing of materials, it all seems possible again. I love your printing tips and your energy, and I feel like you and that entire room smell like cotton candy lol. Keep up the good work!
Thank you so much. I'm so happy to hear you're getting your business going again I wish you nothing but success. happy crafting and I love the cotton candy made me lol
I was subscribed to you but didn't really watch. Then I saw you more on DB & fell in 💕 with your content so I'm just following you back to your channel & actually watching this time.
Hi! I am from SC. Glad that you are back, because I am so confused about DTF hacks and need more information on what printer to purchase in order to complete the DTF hack. I really want to print larger images.
Yaayy Crystal ❤glad you’re back. Yes I’ve been both waiting for you to come back but I also love watching you on design bundles 😊 another amazing tutorial as always. Stay blessed love 🥰
CrystaAnn, I have watched all of your videos multiple times. I love the way you explain things. I will be following you on both pages. Thanks for all you do!!
I tried a wash and tumble dry test of sublimation DTF on white cotton... I noticed that 30C wash inside out was absolutely fine - no issues. However a tumble dry even on a low setting left the print dry, and cracking. So I think I'll add "wash inside out with similar colours - max 30C - Hang dry only - do not tumble dry" - Would be great to see what results you get with washing and drying :)
Crystal thanks for the videos what I like about you is that your honest and straight to the point! Looking forward to more videos. Thank you for all you do.
Thank you for all of the great videos! you are such a great teacher! I always watch you on Design Bundles and your channel when you are on. Keep up the great work you do!! ❤😘
This was all a lot of great information! I love my Sawgrass Printer and I learned several new things from you today. I very much enjoy the way you do your videos and look forward to watching more. I did find you on Design Bundles.
Yay! so glad your here and your have a sawgrass printer stay tuned there a big updates coming to sawgrass next week eeeekkk also I have a fun sublimation video with 3 projects next week
Thanks for the great video. I rewatched a few times but can't find if you gave a temp to use for curing on the griddle and sublimation oven. Do you have those available?
Hi Crystal, I am new to your channel and I truly love how you do test on these items. Helps us all alot, thank you for your wonderful videos. I think we are all looking for the best alernative to dark shirts. Sure, helps and hey I read on the spray you were using with Dyepress and apparently they came out with a new one that only is one spray bottle without using two sources. It's called Dypress poly T Plus, or I think pro. You might want to check that out. Less work! Lol.
From the Design Bundle TH-cam just found out on there you had your own channel which I am so happy about! I am from outside of Vancouver BC Canada.I grew up in Ireland. Enjoying your channel! Thank you for sharing hugs Liz x
I came from Design Bundles. I WAS missing you but I didn't know where to find you until I recognized you at the Silhouette new machine announcement this week! You looked great!! I was missing your sweatshirt so it took me a while to figure out where I knew you from. Hey, I'm old...I knew I should know you BUT... 🙂
CrystalAnn Thank you for all of your videos, I tried using my Epson 2760 and the DTF Film would not pick up the film no matter the way I tried it. So what did I do but buy a sawgrass 500 printer, set it up today and printed the image and it came out beautiful!!! I am so excited to continue making my projects. Thanks again!
Welcome back! Thanks so much for this tutorial, lots of good information and so easy to follow. I do have one question as far as printing through Sawgrass Print Manager. Which settings should be used under the Material tab for the Substrate and Paper options? Of course depending on which Substrate you choose will give different options under the Paper. Thanks so much for all you do. Glad to see you back on your own channel!!
Thank you so much feels good to be back! For the DTF hack I use polyester for the substrate True pix classic for the paper settings and I print on vibrant
Ive tried this over a dozen times and i got this to work great on light colors but with black on a cut an offset on white HTV im still getting a smug look on my designs and idk why...its soo frustration. Thank you for all your videos it does help a lot of us newbies.
You're so welcome thank you for your support. I think with the HTV thats comes along with with I to have a slight bleed or blurred edges not 100% crisp I wonder if we used another substrate print setting so it prints less ink ? I need to test this more
Nope, not yet. I don’t have a sublimation printer (yet!), but I’m excited about what you said about regular inkjet ink (black). I’ll have to look into the dtf paper and the powder!
I love to watch you. Sonetine you got to fast for me,, but you explain pretty well. I need a little help. I need how to do the mirrored from my laptop when I want to print it in my inkjet printer. My laptop is an Asuss brand and my printer is a hp. Please help
I will show this in tomorrows video and if you need to slow down my videos you can on the bottom right hand of the video click on the gear to Lower the speed
@@YouCanTotallyMakeThat I am. I actually got to watch this video. I was able to go over it several times. Thank you so much for all the awesome information.
Have you tried the DTF Hack?
Not yet! I'm saving up for that Sawgrass 💰💰
@@UpTillDawnCrafting Sending positive vibes to your Sawgrass savings fund 💰💰
I have all the supplies but still haven’t tried it yet!
@@April-rs8gz You will love it and be hooked once you do
No, I dont have room for another printer. For now i am using the DTV.
Yes Crystal I Would Like To See You Do The DTF Sublimation Hack On A Black T-Shirt,Thanks!
today I was was wanted to sublimate on a stretched canvas from Walmart. I used my griddle to set the ink powder on the DTF film. While my griddle was still hot at 358 degrees I taped the picture to the canvas and turned it upside down on the griddle and wieghed it down for 40 secs. the results was fabulous. When it cooled I pulled off the DTF sheet and the print was perfect.
That is awesome 👏 I need to try this thank you for sharing
Every Video I've Watch From You I Get Something From It,Thanks A Lot Young Lady!
I'm so glad to hear that ❤️
I just found your personal channel -- seen you on the DB channel before. You were under another video I was watching this afternoon and I wanted to see what you had for the DTF on regular printer ink. Glad to be here!! ♥
You're a rockstar CrystalAnn! We can't wait to watch the premier.
Thank you! Yay see you tomorrow ❤
I am 67 years old and just found your channel. I just bought a printer, heat press and sublimation supplies. I will be adding these items to my order. My granddaughter and are going to try and start a home business. Thank you for these wonderful hacks.
This video is really irresponsible by not using any PPE. You should use some latex or nitrile gloves when touching the powder, and a dust/painters mask, and goggles. The fine particulates are dangerous when airborne, and if you breath them in, congrats, you now have plastic in your body forever. The powder also off gases when heating up. She has no fume extraction at all. Those VOCs are in the air, not safe to be breathing for long periods of time. Look up Brother Earnest if you want to know more about the dangers of dtf powder. Sadly, he is currently battling cancer that has been confirmed to be caused by years of being exposed to the dtf powder and not using safety measures. He showed his endoscope video and he had powder caked on his esophagus. Not trying to scare you, just be safe.
@@pixelbat What are you talking about? She has a silent vent system in her craft area. And as she told you the DTF powder that she is using is made for low vent areas
@@EB.80 like 99% of dtf powders being used are marketed as TPU, which just means thermoplastic urethane, it's fine in it's sold cured state. What they don't tell you is it's made from a polyester resin, which when heated up can release small amounts of styrene monomer which is not safe to breathe, especially over a long period of time. If she is using a ventilation system it won't help since you need to extract at the source, and I didn't see a fume extractor there. They literally make fume extractors specific to dtf printing now. And the powder is even more dangerous in it's airborne particle state, not gas. When you're coating your transfer and moving the powder around, some of it gets kicked up. This is why you need a dust mask. If you breathe the powder in as a particulate that is micro plastic that will never leave your body. Can choose to be ignorant, or be safe. Up to you 🤷♀️
Welcome back! YT just suggested your channel to me but I’ve been watching you on DB foreverrrrr now!
Thank you so much I'm so glad you found me here ❤️
Thanks for your wonderful hacks! You make everything so easy to understand! Glad you're back again!
I'm happy to see you back on CrystalAnn😀 I was watching you here back three to four years ago. You have had an amazing journey!!!
Thank you so much ❤️ 😀
Wow Wow wow !!!!! thank you for being so detailed with how to create an offset and the Dark color DTF hack lmbo!!!! Im dancing with excitement
You are so welcome! 🤗 Glad you liked it
Hi, I just jumped over from the Design Bundles youtube page. I just bought dtf powder, blanks and even a swingaway heat press. Now I need to learn how to use them! Thank you for the great tutorials!
I really like u you are a breath of fresh air especially with the social media platform having so much crazy content on them u make my day so thank you
Awww thank you so much
Love love love your videos, sooo much info and way better than other videos where you do the hacks tutorials and show the results all in one video rather than stretching over 2 or 3 videos. Thank you you’re awesome!!
I have watched you for so long! When I have trouble or in a rut I can always turn you on and watch to be inspired! I'm so thankful for you! I was a design bundles member for about a year. I just couldn't afford a monthly payment and pay for designs. I miss it so much. So many great designs! I personally think your site has the best images etc. I encourage anyone who can to join. I love canva as well! You are a great instructor.
Thank you so much this means so much ❤️
That's why you check out the Mega bundles!!!! So much for so little.❤
I am a DB member but it irritates me. It always says, you don't have that type of membership! But I have hundreds of dollars on my account! 😣
Hi Chrystal! So exciting to see you again.
Hey there! Thank you so much
I coat "twice", once a few times back and forth sideways (horizontally), and once a few times up and down (vertically). This has really helped me not have any missed spots.
❤️ thanks for sharing 😀
I’ve been around but wasn’t sure if when I got in DB if ur was your original now I know what happened! 😂. Welcome back! #loveyocraft
Thank you so much! so glad your here
Only new you from design bundles and somehow found this channel and trying to find your blog for starting your business, glad you're back
Yay! glad you found me and thank you
Yaaaay so happy you are back! Looking forward to it!
Thank you so much Gati! 🎉❤
Ohhh I’m so excited! 🎉❤
Yay!! Me to Brittany hope to see you tomorrow ❤
So many useful information！Wonderful Video CrystalAnn!
So glad you like it thank you so much ❤️
Loving that you're back! Can't wait to watch and learn with you!
Thank you so much for your support! I'm so excited to be back 🎉❤
Another thing I found online about DTF powders is: It is recommended to always use proper protection, including gloves, eye protection, and the proper mask or breathing apparatus when working with DTF powders, as they can become airborne in the coating process. Businesses should not risk inhalation of the powder or extended skin exposure. Additionally, make sure that excess powder does not spread and contaminate other items during the powdering process.
It’s just like using embossing power for scrapbooking and cards ❤️ always work in a well ventilated area
I wondered about this. My cats were in my office when I was doing this and I noticed when I poured, some powder hung in the air for a second or was left on my table, which they walk on. Not taking chances after this! PPE , cats closed off from coming in & thorough clean-up! Thank you for sharing!
So happy to see you back Crystal! So looking forward to this woohooo 🎉
Yay!! Thank you so much ❤ Loving your channel as well
Hey! So glad you're back! Been waiting 😂
Thank you so much ❤️ I appreciate you 😁
This channel is wonderful. I stumbled onto it while searching for sublimation videos because I am going to try to restart a clothing business I had started back in 2008 but had to scrap for various reasons. Back then the sublimation printer was brand new and super expensive and I didn't know you couldn't use it on 100% cotton and I had already bought hundreds of blank cotton shirts and..... just a whole mess. But seeing all these cool hacks and what not, plus the fair pricing of materials, it all seems possible again. I love your printing tips and your energy, and I feel like you and that entire room smell like cotton candy lol. Keep up the good work!
Thank you so much. I'm so happy to hear you're getting your business going again I wish you nothing but success. happy crafting and I love the cotton candy made me lol
Omg can’t wait! So glad you are back Crystal ❤️
Thank you so much Agata! I'm so excited to be back ❤
So happy to see you back Crystal ❤
Thank you so much Debi ❤️ it feels good to be back
So glad you are back.
Me to Mona :)
I Really Like What Your Doing Keep Up The Good Work Crystal Your Really Showing Me A Lot!
Thank you so much! 😊 I appreciate this
so glad you are back
Thank you so much 😊 ❤️
I was subscribed to you but didn't really watch. Then I saw you more on DB & fell in 💕 with your content so I'm just following you back to your channel & actually watching this time.
Sweet thank you so much Marilyn for your support ❤️
I was just watching several of your videos yesterday so I’m happy to see this notification today
Yay!! Thank you for watching I truly appreciate it ❤️
Will be watching this one! Thank you CrystalAnn!!!
Thank you so much Dee ❤
Happy to see you here a well❤❤❤
Thank you for your support ❤️
I tried using the hot plate for drying the adhesive and it works so well! Thank you😊
Yay! so happy to hear this
Yay so happy to see you back on your channel❤️
Thank you MaryAnn ❤️
Hi! I am from SC. Glad that you are back, because I am so confused about DTF hacks and need more information on what printer to purchase in order to complete the DTF hack. I really want to print larger images.
I highly recommend sublimation for the DTF hack for the best results! I love the DTF hack lots more video to come
Yaayy Crystal ❤glad you’re back. Yes I’ve been both waiting for you to come back but I also love watching you on design bundles 😊 another amazing tutorial as always. Stay blessed love 🥰
Thank you so much for your support :)
Yes came from design bundles love watching you
Yay!! so glad your here ❤️
Thank you so much! I followed your instructions and my shirt is better than I imagined!
Great job! So happy to hear this ❤️
Hi there, I just found you, and WOW 🤩 I’m loving everything you say! Thank you so much, I’ll keep listening.
CrystaAnn, I have watched all of your videos multiple times. I love the way you explain things. I will be following you on both pages. Thanks for all you do!!
Thank you so much I appreciate all your support ❤
watched you on the design bundles stubbled onto this video so you will be going into my favorites
Yay! so happy to hear this thank you so much
Griddle hack was awesome. I tried it. Thank you very much Crystal.
Right? I love it and your so welcome glad I could help 😃
I tried a wash and tumble dry test of sublimation DTF on white cotton... I noticed that 30C wash inside out was absolutely fine - no issues. However a tumble dry even on a low setting left the print dry, and cracking. So I think I'll add "wash inside out with similar colours - max 30C - Hang dry only - do not tumble dry" - Would be great to see what results you get with washing and drying :)
Definitely need to see how it holds up after washing several times.
Hey Crystal Ann loved you on Design Bundles channel glad I found you again!
Yay! Thank you! so glad you found me ❤️ So thankful your here
Thank you for all the great videos!!! ❤️❤️
Thanks for watching!
Hello from Terrell TX. Ordered my griddle Dtf paper and powder!!! Can’t wait to try it!!!!
Yay I’m so excited lots more fun DTF hacks coming soon ❤️
Good Morning Crystal. Getting ready to do the sublimation on a black apron using the faux screen print ink bleach spot. 🤞🏻
Good morning ☀️ that’s awesome happy crafting ❤️
Great to see you Crystal! You've taught me so much- Ty for your tutorials!
Thank you so happy to hear this ❤️ your so welcome Thank you for watching 😁
Crystal thanks for the videos what I like about you is that your honest and straight to the point! Looking forward to more videos. Thank you for all you do.
Thank you so much for this ❤️🥰 Thank you for your support
Just ordered the powder and paper you use. So excited!!!!
Yay! Hope you like it! let me know how it goes :)
Paper arrived Sat, powder should be here today. 😄
Love watching you. Can't wait for more content😊 your ideas, tips and tricks have been so helpful.😋❣️
So happy you find them helpful ❤️😀
My first time watching you. Love it! Awesome video!
Thanks for watching! So glad your here
Missed seeing you!! So glad your back!!
I love watching you DTF hacks
Thank you so much
Love you on both! You are awesome teacher and you always answer my questions.
Thank you so much I’m happy to help ❤️
this has been very educational. thank you, Crystal
Thank you so much Linda so happy to hear that
Thank you for all of the great videos! you are such a great teacher! I always watch you on Design Bundles and your channel when you are on. Keep up the great work you do!! ❤😘
Thank you so much 😊 - CrystalAnn
This was all a lot of great information! I love my Sawgrass Printer and I learned several new things from you today. I very much enjoy the way you do your videos and look forward to watching more. I did find you on Design Bundles.
Yay! so glad your here and your have a sawgrass printer stay tuned there a big updates coming to sawgrass next week eeeekkk also I have a fun sublimation video with 3 projects next week
@@YouCanTotallyMakeThat Oh! I am so excited! I am already thinking of replacing my Sawgrass 500 for the SG 1000, for the size!
@@Jemmyjo 👏 Yay!! it will be worth the investment and last you years to come imagine all the possibilities woot woot
So glad I came across you. Great tutorial and easy to follow 😊
Thanks so much! 😊 I'm so glad you found me a well
Just found this and I am so glad I did for sure, thank you for teaching us!! And BTW you look amazing!!!
Yay! I'm so glad you found me :) and thank you so much
Tfs all your hacks, CrystalAnn! I clicked on the link for the DTF paper but it's different from the 9ne you show.❤
I will look into this sometimes the seller does that or if I can't find the original anymore I share another one I recommend
I’ve been watching you on design bundles and this page was on my recommended page! Subscribed
Yay!! so glad you found me thank you for the sub 💜
Im new to ths and I can understand your directions thank you
So happy to hear this Judy - happy crafting
I learn so much from you! You are awesome!
WELCOME BACK!!!
I really like your way of teaching!!!
Thank you so much I really appreciate it ❤️
Thanks for the great video. I rewatched a few times but can't find if you gave a temp to use for curing on the griddle and sublimation oven. Do you have those available?
Love the video! You have explained DTF, so we can easily do this! Thank you!!
Your so welcome 🤗 happy to hear this ❤️
Great tutorial Crystal! I've learned so much from you. You're an awesome teacher :)
Thank you so much Carolyn ❤️
Thanks CrystalAnn! Great video! I have a better understanding of how to use this on dark shirts.
Thank you Gladys so glad I could help
Love your videos and the way you explain things!! Happy to see you back here 🙂
Thank you Jordyn I love your designs ❤️🤩 your amazing
I love this hack! Ordering everythinf i need now. How many washes does this take before cracking or pealing off or getting dingy looking.
Yay!! your going to love it I have had shirts with over 20 plus washes with no issues still
Can you tell me the times and temps for curing and pressing using htvront heat press, I love your videos…..
cure at 385 press at 300F for 20 seconds Thank you so much
Hi Crystal, I am new to your channel and I truly love how you do test on these items. Helps us all alot, thank you for your wonderful videos. I think we are all looking for the best alernative to dark shirts. Sure, helps and hey I read on the spray you were using with Dyepress and apparently they came out with a new one that only is one spray bottle without using two sources. It's called Dypress poly T Plus, or I think pro. You might want to check that out. Less work! Lol.
From the Design Bundle TH-cam just found out on there you had your own channel which I am so happy about! I am from outside of Vancouver BC Canada.I grew up in Ireland. Enjoying your channel! Thank you for sharing hugs Liz x
Thank you so much 😊 I'm so happy you found me I bet both Ireland and Canada Are beautiful ❤️ CrystalAnn
I came from Design Bundles. I WAS missing you but I didn't know where to find you until I recognized you at the Silhouette new machine announcement this week! You looked great!! I was missing your sweatshirt so it took me a while to figure out where I knew you from. Hey, I'm old...I knew I should know you BUT... 🙂
Yay!! So glad you found me 😀❤️
Great video!
So helpful! Thank you!😁
CrystalAnn Thank you for all of your videos, I tried using my Epson 2760 and the DTF Film would not pick up the film no matter the way I tried it. So what did I do but buy a sawgrass 500 printer, set it up today and printed the image and it came out beautiful!!! I am so excited to continue making my projects. Thanks again!
YAY!! That is so exciting congratulations on the sawgrass your going to love it Happy Crafting
Great video..can't wait to try this hack..:)
Thank you 😊 Your going to love it 😍
Welcome back! Thanks so much for this tutorial, lots of good information and so easy to follow. I do have one question as far as printing through Sawgrass Print Manager. Which settings should be used under the Material tab for the Substrate and Paper options? Of course depending on which Substrate you choose will give different options under the Paper. Thanks so much for all you do. Glad to see you back on your own channel!!
Thank you so much feels good to be back! For the DTF hack I use polyester for the substrate True pix classic for the paper settings and I print on vibrant
love your tutorial
Ive tried this over a dozen times and i got this to work great on light colors but with black on a cut an offset on white HTV im still getting a smug look on my designs and idk why...its soo frustration. Thank you for all your videos it does help a lot of us newbies.
You're so welcome thank you for your support. I think with the HTV thats comes along with with I to have a slight bleed or blurred edges not 100% crisp I wonder if we used another substrate print setting so it prints less ink ? I need to test this more
This is a game changer. I’m purchasing supplies “tuhday “!
yay! so glad you liked it happy crafting
Nope, not yet. I don’t have a sublimation printer (yet!), but I’m excited about what you said about regular inkjet ink (black). I’ll have to look into the dtf paper and the powder!
Thank you so much. Great information. Would this be good on glass and wood? Thanks
Hi, Crystal Ann. 15:49 I am from Cambridge New Zealand .you for letting me be with you. I am very entertained 😊❤
Happy to hear that Thank you for watching
Hello! What if I just have a Cricut press and no griddle? Could I heat it with that some how?
Yes you can flip it upside down and use just be super careful and cover the platen with parchment paper
I love to watch you. Sonetine you got to fast for me,, but you explain pretty well. I need a little help. I need how to do the mirrored from my laptop when I want to print it in my inkjet printer. My laptop is an Asuss brand and my printer is a hp. Please help
I will show this in tomorrows video and if you need to slow down my videos you can on the bottom right hand of the video click on the gear to Lower the speed
When you printed on the dtf film what setting did you use for printing the design
For my sawgrass its polyester and truepix classic for the paper on vivid color settings
I was just thinking about getting a DTF printer and teying to budget for it. Going to try this instead!
Heck yes save your cash
Hey CrystalAnn. Checking in on my day off from Texas
Hello Paulette I hope you enjoy your day off
@@YouCanTotallyMakeThat I am. I actually got to watch this video. I was able to go over it several times. Thank you so much for all the awesome information.
Nope just popped up and said hey she's back!!
Yay!! 😀I'm definitely back ❤
I have seen your design bundle videos so you popped up in my suggestions. ❤
Yay so glad it did ❤️
Great video. Can I use my current Sublimation ink printer or do I have to use DTF ink in to do this?
Yes, absolutely use your current printer
Thanks
@@YouCanTotallyMakeThat
So happy IJust found you!
From Vancouver Island BC Canada