I bought and returned two different authentic Microtech knives because they were so difficult to open. Purchased a clone from DH Gate and liked it far better. Easy to open and reliable
Great thing about the clone dagger blade is I don't feel bad about reprofiling the edge to drop the angle. Approximately 24°on my work sharp worked great.
Some of these clones are insane in how they replicate the details and even the weight of the real thing for a fraction of the cost. The clones I got went up there in price. No higher than 60 bucks for my Combat Troodon clone. The first version I bought was a tad lighter than the real thing and the screws came off at one point. Also not the correct clip. The 2nd version I got is more clone correct with the correct clip and markings. VERY impressive. The new Microtech Glykon is BARELY out and already there's a clone of it on DHGATE. They work FAST. For the price of 60 bucks, it's literally a steal to get one.
Thanks for the comments - I am going to take a look at the Glykon - maybe get it - and by the way this knife jammed up and It now doesn’t work …. Thanks for watching
@@ArizonaLifestyles1 I'm currently carrying another clone that's VERY WELL made. The screws hasn't fallen off and has yet to jam up on me. I have been cleaning it every so often to prevent it. The Halo VI clone I have is starting to break down with the latch being loose and tightness of the deployed blade being wore out
@@ArizonaLifestyles1 I honestly don't pay attention to the seller on DHgate. I think they are all made in the same factory. I have a Halo V with the drop point, which broke. Then I got a Halo VI with the hellhound blade with his starting to break, so I plan to get another one. My current Combat Troodon is holding up nicely so I am not getting another one. I have a Benchmade Autocrat clone that's holding up very well. I have a sliver colored Ultratech with a partly serrated blade. Another ultra tech with the spartan blade. I have a Makora II but the thing rattles so I plan on getting another. I really like the asheville steel Paragon clone I got. VERY well made. I got an EXOCET in Bounty Hunter colors.
Hope it’s better than mine - after about 4 months the blade locked up now it’s in a parts bag- I love that knife just these cheap clone OTF you have to treat them gently - no pry bar action it binds them up ! But for the price it’s worth a try ! Thanks for watching and commenting
Hey thanks for watching!!!! Where you at in AZ? I hope you enjoy the clones some of them are great others can be a pain …. Just don’t pry with the clones and you should be fine -
@@ArizonaLifestyles1 Peoria! And it’s crazy but both knives I ordered you featured in this video, also I had bought an OTF from a local smoke shop that looks almost exact to that ravencrest
@@Elmax17.5dps the crazy thing is I don’t know - it just stopped sliding - I took it apart and filed it down and still didn’t work - I really liked it - but a real one is like 700 bucks …. May get a hellhound clone next
Maybe only the blade is 10 times better but the mechanism is on par lol.. So probably better to buy the clones since overall the real one isn't actually 10x better 😂😂
@@Nolimitlandon2310 Its not 500 dollars worth of knife.You can build an PSA ar for $400.Much more machining and intricate parts.They are taking fools money
Good question ! Carbon fiber Bugout check my channel for the full review and if you are interested check out my last long form video - I recap all of my knives -
The fact the blade is already distorted from a few jabs into a 2x4 demonstrates how this clone will hold up. It won't. A knife is a tool and can help out in a life threatening situation which is the LAST place you want to be with something of questionable quality. Sure if you just want it to flick and look cool, why not? TBH, Fuck clones! Whether it be wrist watches, mechanical mods (vaping), knives, or flashlights. The real deal is expensive for a reason. Save up money and get the real thing folks!
@@ArizonaLifestyles1 it's beyond belief brother beyond belief what you can do with a blade. if you're into knives and you're not sharpening like a pro it's like owning fishing tackle but there's no water around
I bought and returned two different authentic Microtech knives because they were so difficult to open. Purchased a clone from DH Gate and liked it far better. Easy to open and reliable
Cool - clones can be finicky sometimes - keep them clean and oiled up and you should be fine - thanks for watching and the comment
Great thing about the clone dagger blade is I don't feel bad about reprofiling the edge to drop the angle. Approximately 24°on my work sharp worked great.
Yes I don’t worry about honing my clones
Some of these clones are insane in how they replicate the details and even the weight of the real thing for a fraction of the cost. The clones I got went up there in price. No higher than 60 bucks for my Combat Troodon clone. The first version I bought was a tad lighter than the real thing and the screws came off at one point. Also not the correct clip. The 2nd version I got is more clone correct with the correct clip and markings. VERY impressive.
The new Microtech Glykon is BARELY out and already there's a clone of it on DHGATE. They work FAST. For the price of 60 bucks, it's literally a steal to get one.
Thanks for the comments - I am going to take a look at the Glykon - maybe get it - and by the way this knife jammed up and It now doesn’t work …. Thanks for watching
@@ArizonaLifestyles1 I'm currently carrying another clone that's VERY WELL made. The screws hasn't fallen off and has yet to jam up on me. I have been cleaning it every so often to prevent it. The Halo VI clone I have is starting to break down with the latch being loose and tightness of the deployed blade being wore out
@@Excalibur01 which one halo or combat troodon? I want to get a decent combat troodon in hellhound blade … any ideas for good sellers?
@@ArizonaLifestyles1 I honestly don't pay attention to the seller on DHgate. I think they are all made in the same factory. I have a Halo V with the drop point, which broke. Then I got a Halo VI with the hellhound blade with his starting to break, so I plan to get another one. My current Combat Troodon is holding up nicely so I am not getting another one. I have a Benchmade Autocrat clone that's holding up very well.
I have a sliver colored Ultratech with a partly serrated blade. Another ultra tech with the spartan blade. I have a Makora II but the thing rattles so I plan on getting another.
I really like the asheville steel Paragon clone I got. VERY well made. I got an EXOCET in Bounty Hunter colors.
I have one coming from Ali Express, didn't know about DHG. Hopefully its as good as the one you got. Cost me $56 with a mirror finish blade.
Hope it’s better than mine - after about 4 months the blade locked up now it’s in a parts bag- I love that knife just these cheap clone OTF you have to treat them gently - no pry bar action it binds them up ! But for the price it’s worth a try ! Thanks for watching and commenting
@@ArizonaLifestyles1 Yeah I baby my OTFs for that exact reason. I have other knives if I really need something heavy duty (not very often).
Hey bro fellow AZ resident here I just got into these OTF knockoffs and I ordered 2 one of them this one! Thanks for the video
Hey thanks for watching!!!! Where you at in AZ? I hope you enjoy the clones some of them are great others can be a pain …. Just don’t pry with the clones and you should be fine -
@@ArizonaLifestyles1 Peoria! And it’s crazy but both knives I ordered you featured in this video, also I had bought an OTF from a local smoke shop that looks almost exact to that ravencrest
Thanks for the cool vid.
Thanks for watching
Can you do a video breaking glass with the clone if it holds up to it please
Probably not :) and that one broke a long time ago - thanks for watching
I’d like to see the benchmade bm3400 g10 from DHgate 😉
Did you get yours yet?
Is there a lot of wiggle in the blade?? Thanks
A little bit but I’ve seen more and less
It seems these dagger blades are less stable than the tanto / single sided blades but maybe that’s just my opinion
Hello, i would love to grab one of these. I looked on the site but the logo is missing ,also i don't see the opening thumb switch.
Find one with a customer review … with a pic … the customer pics will show you how they really look
They have to advertise it like that, if it says microtech in the description it will have the logo and the push switch
john wick used a ultratech not a troodon
Only ?! Check the film
Its a counterfeit…. Not a clone.
Whatever it is it’s not a real one, you usually get what you pay for , and they don’t last
Tomato tomato
Do you have the link for the JW counterfeit?
Links always change just go to DHgate and search for combat troodon or combat dinosaur or combat Microtech and you’ll get a link
That 5.8 oz is not correct. The hell hound is the heaviest and they are 5.3 oz in real world test.
I took the authentic weight from BladeHQ .2 of a difference…
I apologize I was wrong on that. 😮😊
@@Elmax17.5dps no issues it broke anyways so whatever the weight it is it is in the parts drawers:)
@@ArizonaLifestyles1 OH no lol how did it break?
@@Elmax17.5dps the crazy thing is I don’t know - it just stopped sliding - I took it apart and filed it down and still didn’t work - I really liked it - but a real one is like 700 bucks …. May get a hellhound clone next
Yeah let's spend 500 bucks on something that is far from 10 times better.... :-) Maybe not even twice.
Maybe only the blade is 10 times better but the mechanism is on par lol.. So probably better to buy the clones since overall the real one isn't actually 10x better 😂😂
You have been sadly misinformed do your research on the real one
@@MeepMeep88 you have been sadly misinformed it’s not jus the blade that’s 10x better
maybe some people like the good stuff and not fake shit. youre only kidding yourself if u get one if these knockoffs
@@Nolimitlandon2310 Its not 500 dollars worth of knife.You can build an PSA ar for $400.Much more machining and intricate parts.They are taking fools money
What’s the best clone you’ve tested?
Good question ! Carbon fiber Bugout check my channel for the full review and if you are interested check out my last long form video - I recap all of my knives -
@@ArizonaLifestyles1 thanks! Dhgate as well?
@@ArizonaLifestyles1 and subbing ! I never thought you’d reply let alone so quick ty
@@ArizonaLifestyles1 what’s the best OTF?
@@3quartertim3 I try to reply to all of my comments :) unless they are dumb and mean:) check out my reviews and let me know which one is my favorite
Could u add a link???
Just added it :)
The sharpness of these knives are hit and miss. I needed to sharpen all my clones
Ya I agree on most of them are not that sharp the higher end bugouts are decent though
The fact the blade is already distorted from a few jabs into a 2x4 demonstrates how this clone will hold up. It won't. A knife is a tool and can help out in a life threatening situation which is the LAST place you want to be with something of questionable quality. Sure if you just want it to flick and look cool, why not?
TBH, Fuck clones! Whether it be wrist watches, mechanical mods (vaping), knives, or flashlights. The real deal is expensive for a reason. Save up money and get the real thing folks!
That knife is now broken and I have a real Microtech Ultratech … use it everyday
spend some money on a complete wicked Edge gen 3 pro!
a real one and you'll have sharp knives instead of butter knives
Sounds good I’ll look it up - thanks for watching
@@ArizonaLifestyles1 it's beyond belief brother beyond belief what you can do with a blade. if you're into knives and you're not sharpening like a pro it's like owning fishing tackle but there's no water around
Dude DHgate has a fake grimsmo Norseman. Insane!
I’m looking it up …
Share the link my guy
If you want a Beater or a Throw away SD knife you can’t go wrong with a Clone.
I agree Shaun - unless they totally don’t work … then it’s worthless . Thanks for watching