Thanks for the video! Did you find the CRV knuckle from a junk yard? Was looking up parts and that one was very expensive :/ Hoping I can track one day in good shape.
So did u change the ebrake cable bracket? Kuz i did the same set up but used the integra cable bracket and my ebrake dont fully ingaged..cant you let me know pls thanks
Whats the difference between the Prelude rear hub assembly and the ITR rear hub assembly? I have also heard of people using the V6 TL 96-98 rear hub assembly with the OEM nut.
Thank you! Doing this now, but I have a EG with SI disc conversion in the rear. Can I reuse the spring and bracket for the ebrake? Or do I need to get that from an Integra? Thanks in advanced.
@@ACGarage614 nice work bro. Followed the k24 coupe build you did. You went thru a lot with the swap. Getting a bad k20a2 then eventually getting k24 In there. About to start my k swap. Fingers crossed all works out.
Are you just changing the brackets on the calipers, and are they integra or civic hose bracket? And for the trailing arms, does it have to be em1 or just any 96-2000 trailing arm?
@@PeterTron caliper brackets are different from e brake brackets. You need rsx caliper to trailing arm brackets. The bracket that attach to the spring for e brake needs to be integra and the bracket for holding the ebrake cable can be either rsx or integra.
Jey man..i have a 7th gen civic coupe to be exact. I want to do the same to my car. Will those parts fit.? I want to change From 4 lugs to 5 because I'm kinda having a hard time to get me some rims.
@@ACGarage614 ok thanks for input! uhm, i just did research, and found that 5 lug usdm hubs (32mm) fit stock integra front knuckles.. if thats the case cant i just go this route? and use itr calipers.. but again i could be wrong, due to what i just read on online.. but description on this afhkparts.com/shop/usdm-itr-dc2-ek9-oem-front-hubs-5-lug-2/
@@CMSPEC That link you shared tells you that you don't need ITR/CTR knuckles. Your stock 4 lug front knuckles with the Honda bearing they mention and the ITR hub will get you 32mm front hubs. It's easier than going 36mm CRV front knuckles/hub and replacing the axles but much more expensive.
I did the same exact thing only issue I’m having is the caliper bracket is touching the rotor in the bottom
Thanks for the video! Did you find the CRV knuckle from a junk yard? Was looking up parts and that one was very expensive :/ Hoping I can track one day in good shape.
Bought from someone parting out a crv
So did u change the ebrake cable bracket? Kuz i did the same set up but used the integra cable bracket and my ebrake dont fully ingaged..cant you let me know pls thanks
For the front set up the 98-01 crv spindles you or anyone ever do this on a DC2 Integra to run k20 engine swap?
What wheel setup are you running, has enough clearance for 16s?
Whats the difference between the Prelude rear hub assembly and the ITR rear hub assembly? I have also heard of people using the V6 TL 96-98 rear hub assembly with the OEM nut.
So the tl 96-98 will fit the 99 civic Si rear hub right if yes perfect and 👍🏻👍🏻👍🏻 for the info
Hello can i just my disc brake trailing arm and just buy a 5 lugs rear hub?
What kinda axel 36mm do you use for eg/dc?
Great information dude 👊🏽👊🏽👊🏽
I did the same setup on the rear except I used integra type r hubs. Same setup on the front also.
For your set up, was the rear simply a slip on? Is it that easy is what I’m saying
@@Hypedsupras did you find out itr 5lugs rear hub is plug in play
Thank you! Doing this now, but I have a EG with SI disc conversion in the rear. Can I reuse the spring and bracket for the ebrake? Or do I need to get that from an Integra? Thanks in advanced.
Eduardo Uceda shouls be the same as integra.
Yes that did work. What ebrake cables did you use? Will EG cables work?
Thanks again!
Eduardo Uceda i havent looked into that yet but eg/intega should work
What rear brake hose did you use ? Were you able to use the factory brake hose bracket ?
Stock disc brake hose for integras
@@ACGarage614 were you able to keep the position of the brake hose bracket and not have any issues ?
did you need it to get E brake bracket?
i have a b18c1 on my ek wat axles did you use wat year and from wat car
How much did this cost you altogether parts wise only?? as I can do all the labor myself.
Roughly $400-$500
What dude you used on the front
its in the description
What year prelude hubs? Rsx base model or type s? you gonna do.poor mans fronts ?
Gsr Turbo everything in description.
@@ACGarage614 nice work bro. Followed the k24 coupe build you did. You went thru a lot with the swap. Getting a bad k20a2 then eventually getting k24 In there. About to start my k swap. Fingers crossed all works out.
The wonder his hard is the good one
do you think i'm working for crx?
Are you just changing the brackets on the calipers, and are they integra or civic hose bracket? And for the trailing arms, does it have to be em1 or just any 96-2000 trailing arm?
Parts list in description
Parts list say rsx base caliper brackets, but at 6:00 you are switching integra brackets onto the rsx brackets????
@@PeterTron caliper brackets are different from e brake brackets. You need rsx caliper to trailing arm brackets. The bracket that attach to the spring for e brake needs to be integra and the bracket for holding the ebrake cable can be either rsx or integra.
Ah would the 96-00 civic disc e-brake, and trailing arms be the same as a 94-01 integra?
@@PeterTron im not 100% but i dont see why not.
That axle nut is sketchy as hell just to be able to say you have an old honda with 5 lugs 😬 accident waiting to happen if the car gets driven hard
It’s actually not. There’s a lot of thread contact. That’s just how the nut looks, that top section of the nut is non-threaded.
Jey man..i have a 7th gen civic coupe to be exact. I want to do the same to my car. Will those parts fit.? I want to change From 4 lugs to 5 because I'm kinda having a hard time to get me some rims.
7th gen civics are easy you can use everything from a 02-06 rsx its plug and play
@@arturodelgado196 ok, i will see what can use from it to Mine
nice vid, is there any way to do this, but with a 32mm front, without going with the ITR knuckles?
Only way to go 32 mm is to find a set of CTR front spindles. Its very hard to find hubs for them as well. What motor are you running?
@@ACGarage614 oops sorry, i mean CTR*, Have stock 95 Integra GSR. Used to have k24a2 swap integra.. this 5 lug wouldve been perfect for that car
Youngchris sorry thats the only way. If you have b series best bet is to use h series axles.
@@ACGarage614 ok thanks for input! uhm, i just did research, and found that 5 lug usdm hubs (32mm) fit stock integra front knuckles.. if thats the case cant i just go this route? and use itr calipers.. but again i could be wrong, due to what i just read on online.. but description on this afhkparts.com/shop/usdm-itr-dc2-ek9-oem-front-hubs-5-lug-2/
@@CMSPEC That link you shared tells you that you don't need ITR/CTR knuckles. Your stock 4 lug front knuckles with the Honda bearing they mention and the ITR hub will get you 32mm front hubs. It's easier than going 36mm CRV front knuckles/hub and replacing the axles but much more expensive.
Are the 98-01 Calipers/Rotors the same as the Stock ITR ones?
Carlo Apalis no sir
@@ACGarage614 i meant to Say 98-01 CRV. but i think you knew that ready. Thanks for answering!
Hey just sub, what e brake cable did you use ?
I haven’t gotten to that point yet but im trying the 94-01 integra
❤️👍👍
Were did u get the hubs I've got an 08 civic coupe trying to go from 6x114.3 to 4x100
If i do this on an ek, do i really need to 5 lug from a dc2? Can I do the same as you just get a 5 lug hub or?
Moudi this is to do a cheap version of five lung conversion. Listen to what i am saying and you will understand. Parts list in the description.
This set up can be done on a eg hatch
Only the rear. You can’t run crv knuckles on the front. The geometry isn’t correct. Still doing research on how to make eg/dc front five lug.
@@ACGarage614 hi thanks for you reply im trying to do this on my eg check this guy chai's vlogs he did a video doing the front
Aaron my rear hubs are too big for the rsx rotors. Do you have to send them to a machine shop to get them to fit?
Raul E Aponte i did not have to machine anything. Everything should bolt right up
Aaron Choum my rotors won’t fit the prelude hub, maybe i got the wrong parts...i’m checkin tomorrow w the auto parts store
Raul E Aponte i would definitely check. To make sure its right.
Just subbed
Front knuckle on CRV what low ball joint can I used ??
Stock crv should work.
@@ACGarage614 cant use integra like from buddy club brand or other racing brands
@@javi_nikkiecuevas4430 you would have to contact them personally
@@javi_nikkiecuevas4430 but if it helps crv and integra share the same oem ball joint.
@@ACGarage614 for the front axle nut do I need to get Mazda 626 axle nut or just for rear
How do you do the front and keep it 32?
Watch part 2 of the diy
@@ACGarage614 what break calipers do you use for the front you didnt mention it ? Can I use rsx type s? Or base model rsx?
@@anthonycrane3055 everything is listed in the description for reference.
@@ACGarage614 I’m slow still didn’t catch it 🤦🏻♂️
You must be 🇱🇦
Does anyone know 5 lug for the 96-00 civic that keeps rear drum brakes?
Crv has 5 lug lug,drum brakes
Dang dat nice lol
i mean its ok.
nice tools....
What year integra caliper did you use for e brake assembly. I have 95 eg dx no rear calipers disc brakes?