how to make a mini rc_ 3d printed skid loader mini rc 2
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2018
- This is a video of the process of making mini skid loader rc.
It is made from Fusion 360 and Arduino.
If you need more data and information, please visit our blog.
blog.naver.com/3dfuns
2020.04.05------------------------------------------------------------------------------------------------------------------------------
We are happy and embarrassed that the request for data is so rushing.
We plan to upload the necessary materials for mini loader production including STL files to the Thingiverse site. So please stop emailing the file request ^^;
Uploading will take about a week, and the ID is '3dfuns'.
I wish everyone a healthy and pleasant maker life ~ thank you~
www.thingiverse.com/thing:426...
-----------------
자료 요청이 너무 쇄도하고 있어서 당황스럽네요..
싱기버스 사이트에 stl 파일을 포함한 제작 관련 자료를 업로드할 계획입니다.
업로드까지 일주일 정도 소요될 예정이니까 관심 있으신분은 참고 바랍니다.
싱기버스 아이디는 '3dfuns'입니다.
www.thingiverse.com/thing:426...
건강 조심하시고 즐거운 창작시간 보내세요!
--------------------------------------------------------------------------------------------------------------------------------------------------
3D 프린터로 미니 스키드 로더 rc를 만드는 과정의 비디오입니다.
퓨전360과 아두이노로 제작되었습니다.
저희 블로그에 제작에 필요한 자세한 정보와 자료가 준비되어있습니다.
blog.naver.com/3dfuns
That's Cool, great job!!! Waiting for STL's in thingiverse
Thanks ~
Uau!!! Show!! Por quanto voce vende uma duzia desses tratozinhos??? Em que site voce os vende??? Bota um nome pra eles pra gente comprar....voce vai ficar rico!!! Nossa que bonitinho...da ate pra apanhar pequenos lixinhos dentro de casa e se divertir ao mesmo tempo
This is absolutely fantastic!
thank so much~ ^^
wow~~~good
Excelente.
Saludos desde El Salvador en cuarentena.
Rindo homenaje a tu dedicación.
Ten cuidado ~
디자인이며 구동 아이디어며 영상 제작하는 솜씨며,, 뭐 하나 빠지는게 없네요.
기어가 프린팅이 되니 활용도가 좋아보입니다. 제가 가진 프린터는 해상도가 낮은지 디테일이 자꾸 뭉개져서 시도를 안하고 있는데 ㅜㅜ
잘 보고 갑니다.
좋은 말씀 감사합니다. ^^
어떤 기종인지는 잘 모르겠지만 조건만 잘 잡으시면 기어 정도는 무리없이 출력하실 수 있을텐데요.
저희도 조건 잡느라 여러 시행착오를 경험하고 있습니다. ㅎ;
좋은 하루되세요~
So... DIY Rokenbok? Looks great!
Gran trabajo! Enhorabuena!
Gracias por su salud y que tenga un buen día.
Respect! Defenetly one of my future projects.
Thanks
I will support your challenge~
Really nice model. But without publishing the gerber files and parts list for the board it is just too difficult to attempt to build.
Very nice micro loader
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Thank you so much~ ^^
저 와이파이&모터드라이버 내장된 아두이노 호환 보드는 어디서 구하는 건가요?
정말 작고 필요한 기능이 들어가 있어서 눈에 들어오네요
3D 프린터도 있으니 한번 만들어 보고 싶어지네요 ㅎㅎ
좋은 영상 잘 보고 갑니다 ^ ^
좋은 의견 감사합니다. ^^
적용된 보드는 아두이노를 기반으로 자체 제작한 보드입니다. 프로토 타입으로 몇개만 제작된 상태구요.. 로더에 적용된 보드 이외에 다양한 호환형 보드를 준비해서 소개시켜 드리려했었는데...바이러스 때문에 예상 보다 좀더 지체될것 같네요. ㅠㅠ
건강 조심하시고요. 곧 좋은 콘텐츠로 다시 인사드리겠습니다. ^^
공유 요청이 너무나 쇄도하고있네요. 하여 조민간 팅기버스에 관련 자료를 업로드할 계획입니다. 참고해 주세요.
즐거운 주말 보내세여~
That is so cool thanks it made my day
It's a pleasant compliment. Thank you. ^^
Take care of your health and have a nice day.
Fabulous video, my friend!
thank you so much~ ^^
Good Man
4 روز قبل
@3D FUNS Thank you for your reply. But the Arduino boards come in a variety of models. I know you use the ESP 8266 WiFi. But what exactly? I work with Arduino myself and I like the UNO model the most.But I didn't find your similar model. Thank you for your help
this is awesome, can you please list the hardware part? . i couldn't figure out which mcu board are you using. did you need moto driver or you connected the n10 motors directly to the mcu?
The board was made and used by Arduino,
The motor was used by tuning the servo motor.
It takes more time to stabilize at the prototype level
Building one at the moment. What CAD file should I use for the rims, if I want to use the lego tank track? Like the one on the right at 9:00.
hi,well done there...iwould like to replicate one i new on 3d print,design,and adruino but i has ender 5 where i could get the board part? did you sell it?
Absolute fantastic =D
Thank you so much~
hello, I'm from Indonesia, can the engine be replaced with a Wemos D1 Mini, or ESP12F?
Great job! It’s unfortunate that the model is based on a unique board that you can’t buy anywhere ((
This is great ;)
Thank you~ ^^
Nice model 👍
Thanks~ : )
it is very cool so i would love to make it and start learning electronics and code for arduino
Thank you ~
We surrendered to hot support.
Please refer to the video description
@@merrickpelan8815 ^^;
great project
thank you~ ^^
@@3DFUNS really want to make these
Cute! Cool!
Thanks ^^
i like what i see 😉
Nice Good Job
Thank you so much~ ^^
great man
Thank you ~
Hi. Your models are very good. Can I know the exact type of modules(PCB-BOARD) you use for your models?
Thank you.
The pcb board was manufactured and used by Arduino.
@@3DFUNS Thank you for your reply. But the Arduino boards come in a variety of models. I know you use the ESP 8266 WiFi. But what exactly? I work with Arduino myself and I like the UNO model the most.But I didn't find your similar model. Thank you for your help.
@@goodman8879 at 4:88 you can see his esp8266 board and then use any appropriate H-Bridge for the motor(s)? It should steer like a tank
Great !
Thanks ^^
This is cool
감사합니다~
Thank you~
thats cute and cool :-)
Thank you
epic
Thank you so much~
NICE1!!!
Thank you so much~
Great
this is pretty awesome!! can you make it radio controlled? and is it possible to put tracks on it?
Sorry for the late reply.
The video will tell you that you can adjust it wirelessly.
Caterpillar is possible. There's an early model in the middle of the video, and it's a caterpillar.(3 minute, 12 seconds)
thank you~
lovely
Thanks ^^
nice, what is the serial number of the DC motor (3v 50rpm) ?
👌 👍
Thanks
Have a good day~
Looks great!!! Went to your blog and cannot read much of it. What are we actually looking at here? Are you intending on selling these as educational kits? We cannot buy the stl's and make it on our own? I am confused and others appear to be as well. What are you selling here?
Hi.
It is a joyful and confusing situation because many people are flooding with interest and requests to share data.
After worries, I decided to share the material about the loader, and I would like to reciprocate the love of the subscribers and provide a pleasant creative opportunity for many maker users.
We plan to upload materials including STL materials to the Thingiverse site. I think it will take a little time to prepare materials and prepare translations.
I will be able to upload it in a week. Please wait a little longer.
Be careful with your health and thank you.
@@3DFUNS This will be GREAT! looking forward to making one
super boulot
thank you so much : )
good job
Thanks~
lol nice work !
thank you so much ^^
have a nice day~
@@3DFUNS Is the project free? or have to pay to download?
are there any fusion 360 tutorials that you recommend?
It's an easy-to-learn program to follow and find examples of modeling examples.
I learned Fusion 360 by referring to books and other TH-cam videos, and I am still learning.
Start with easy modeling. I support your challenge. ^^
Using the video that we made, we provide a tutorial with an English description, but it is not easy because I am not good at English. I ask for your understanding
Thank you very much.
Hello Nice job... do you have more info about servo, motors, FNM coding and screews. For the FNM is it the UNO v3 anduino ???
Thanks .. I plan to share data. Please refer to the description of the video.
@@3DFUNS Thanks, Is it possible to have a wheels and gears STL. This is my email...andfil22@hotmail.com Thanks
@@andfil22 It plans to upload data including STL to thingiverse site within this week. Please refer to the explanation in the main video.
Thank you.
@@3DFUNS Oups I recreated all parts with fusion360 but I didnt see gears and wheel. thanks
@@3DFUNS Im sorry but isit possible to upload to MyMiniFactory site.Thanks
Can you download the files needed for printing somewhere or do you need to create them yourself?
Alternatively, where can I get the phone app and what electronics?
Thank you ~
We surrendered to hot support.
Please refer to the video description
great
thanks ^^
wow
what actuators/motors did you used there?
Hi.
It is a joyful and confusing situation because many people are flooding with interest and requests to share data.
After worries, I decided to share the material about the loader, and I would like to reciprocate the love of the subscribers and provide a pleasant creative opportunity for many maker users.
We plan to upload materials including STL materials to the Thingiverse site. I think it will take a little time to prepare materials and prepare translations.
I will be able to upload it in a week. Please wait a little longer.
Be careful with your health and thank you.
UDP or TCP?
The cat sounds !!!!! amazing !!!!!! hahahahahahahahahah :P :)
Thank you for having fun
Coool! Where RC tank?
Lovely😂😂😂😂😂
Your skid steer loader looks like a fun project, it's a shame that your site shows Malware.
Thank you for your kind advice.
Also, please let me know which sites expose malware. We need to check what problems there are, and if there are problems, we need to take quick action to correct them....
I am very embarrassed because I have never heard of a baby before. Thanks anyway.
It Happened when I went the store from the main page..
عمل جميل
شكرا لك ~
but for people that don't have fusion could you post stl files because i am not able to use software like that I've only used tinkercad
Thank you.
There are no plans to share STL files as content created for educational purposes.
We are preparing a variety of easy contents, so I recommend you to learn slowly.
What is the bluetooth micro controller that you are using inside the toys?
It's a board we made ourselves and the Wi-Fi module is required.
Hello, let's see the project is very good, but since nobody puts the critical point, I am, as I say, the project is fine, but someone who is not very skilled with the Arduino issue cannot assemble the project because they cannot buy the hardware components such as the board the other components can be searched, but information is missing is what I think
for me the project is incomplete
Do you have piece part drawings to go along with the Fusions Tutorials?
I'm sorry.
I don't have any drawings... See the modeling video.
앱 설정파일 좀 공유해주시겠어요? 저 이런 장난감 처음이라 앱 잘 못써요. 부탁드려요
Qual placa você usou?
Baseada no Arduino, a placa que nós mesmos fizemos foi montada.
Are the stl files available to download or are we to copy your vids and design/draw the model from scratch?
I was about to share this to you, had a look on the website, didn't see the files, il check again.
Our content is not shared as separate stl files for 3d modeling and 3d printing training.
Please note that we share the information we need to model and produce with our blogs and TH-cam channels.
Thank you.
blog: blog.naver.com/3dfuns
youtube channels: th-cam.com/channels/L0ZMPy_YN9Bwb7LR0VNgEg.html?view_as=subscriber
Next, RC 3D printed WALL*E.
Thanks
I'll think about it ^^
What arduino is this? I can't find it by FNM board
The board was made by itself and is being prepared for stabilization.
Refer to our blog below for aduino coding sauce.
blog.naver.com/3dfuns/221422750620
I would one can you make one for me and I bought it
Where can I get the board?
Posso usar qual placa, usando seu código?
Information on all materials except the board is shared by posting on the thingiverse site.
The board is being developed for sale in November.
Thank you for your interest and have a good day~
@@3DFUNS Hello, this project is very wanderrfull. I would like to built for my son. Please could you send me information about board? Where i can buy it? And what is the aplication name? Thanks a lot.
Where can we find the stl files?
I'm sorry. This project is designed for 3D modeling education, so I don't have any plans to share stl files for a while. We're going to share it when we're done with our shapeshifter training, so if you want, wait a little longer.
Thank you for your interest
@@3DFUNS 😫 Can't wait that long!
There is a very similar RC bobcat on thingiverse
@@austinconnell1967 I know, made one already ;-) th-cam.com/video/LDNs9YYivFU/w-d-xo.html
could you make a excavtor same size
That's a good idea. ^^
I plan to make various items such as fork lift, but ... I need time for other projects.
Keep watching ~
Thanks ~
i think N20 motor is easy to buy
That's a good idea too.
We wanted a compact size from the start, so we didn't have a variety of approaches when choosing a motor.
Our next project will consider more common hardware components.
Have a nice day
fuck you for the awesome talent you have! I love you :)
hahahahah... Thank you so much. and I love you too ^^
what 3d printer is that?
christopher michaels It is a single plus model of the Cubicon company.
what battery are you using?
I used a lithium ion 16340 / 3000mAh rechargeable battery
Uh 3000Mah 16340 isnt possible ...even 18650's (wich are double the size) only go to 3600Mah
@@-joo3033 I'm so sorry.I accidentally told you the wrong information. It's 650mAh, not 3,000mAh.
@@3DFUNS not a big deal
@@-joo3033 I pay tribute to your advice. Thank you ^^
Bro did you sell that toy bro a want to buy your toy
Can you add english language to your blog please.
I'll try.
Give me some time.
Have a nice day. Thank you very much.
Hello congratulations for your projects are very good. I want to build the tractor because my nephew likes it and I already made others with arduino. But I have a question ... where do I get the files ESP8266WIFI.H --- WIFICLIENT.H --- SERVO.H, thanks.
It is a prototype board of our own.
We are currently making and testing samples for sale and need more time.
Have a good health and have a good day ~
@@3DFUNS ok i hope i can get a badge and all the information soon so i can make my nephew the toy. Can you let me know?
هلا واحد بس سلك شاحن بس في مشكله تمشي علشان في شيء جميل لكنه مستحيل في ذلك اليوم لان فالحياة تكشف طبيعة في شيء مشكله
Sorry.
Translation into Korean is difficult, so I can't answer your opinion ^^;
it s look like stop motion video
That's a good point. I think I need some improvement in hardware or software.
Its like mini vector lol
Thank you.
The vector is really lovely.
I want to create a project that can communicate like a vector
와이파이 제어 앱은 어디서 받을 수 있나요
구글 스토어(모바일)에서 받으시면 됩니다. ^^
@@3DFUNS 이미 찾은 것 같은데, 링크 안에 있었네요, 제가 너무 부주의했어요
@@user-xu9uh1ud8b 별말씀을요 ^^
장마철 건강 주의하시고요...,즐거운 창작활동 응원합니다.
Flying bird
Why Is it so fast, I want to make it
If you can handle fusion360, there is a modeling video, so please refer to it. Also, there's an assembly video, which can help your creative passion.
Have a good day ^^
I didn't find the code for the loader control application anywhere :(
The source code is RoboRemo, the Controller App connected to.
The free version is limited to 5 buttons (slides).
www.roboremo.com/
where i can buy FNM coding board?
Hi.
The board applied to the loader is our own prototype development board.
We are considering production, but it has been delayed due to issues such as supply and demand of semiconductors and prices.
I'll share it with you when I get news that I might like.
Thank you for your interest.
what is the circuit board?
Thank you for your interest. The board used is an aduino-based board that we built ourselves
@@3DFUNS that was great!
@@August301989 thank you so much : )
how to download the APP?
Where Are the printingfiles?
Sorry for the late response, so I couldn't confirm your question.
It is a joyful and confusing situation because many people are flooding with interest and requests to share data.
After worries, I decided to share the material about the loader, and I would like to reciprocate the love of the subscribers and provide a pleasant creative opportunity for many maker users.
We plan to upload materials including STL materials to the Thingiverse site. I think it will take a little time to prepare materials and prepare translations.
I will be able to upload it in a week. Please wait a little longer.
Be careful with your health and thank you.
where can i find this board FNM
The mounted board is a prototype board developed in-house.
It is currently under development, and is expected to be completed around October to November.
The circuit diagram is uploaded to the Singi Bus site.
Thank you for your interest.
Have a nice day
@@3DFUNS please give a link to the development
@@cnccnc3350 www.thingiverse.com/thing:4264914
@@3DFUNS vto83@mail.ru
@@3DFUNS FNM BOARD how can you buy or have a printed circuit board diagram, I want my son to shit such a car and would be grateful if you could help me with this board, you do very good projects for you.
What is it name program
3D Modeling-- fusion360
SW--------- arduino
Is this the right question?
@@3DFUNS thank you
Of course this is a valid question
Cozmo robot
Cozmo... he's a cute little guy.I hope you'll come back with a new look soon
You will make a lot of money selling these as kits
I really appreciate your advice.
Have a nice day.
Hi this is amazing. May i post your video on my Instagram page i have 2k followers on Instagram. I will give you full credits and also add the link to your profile help your channel grow. Thank you
ok ^^.. Have a nice day ~
ja.aliexpress.com/item/32968761711.html?spm=a2g0o.productlist.0.0.79fedb9bMCwOE4&algo_pvid=eb58057a-a40d-4361-9f01-4accb4819fe5&algo_expid=eb58057a-a40d-4361-9f01-4accb4819fe5-0&btsid=0ab6fb8315858302733766744e4db3&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
보드 이름 좀 위 링크와 같나요?
안녕하세요.
자체적으로 제작한 보드를 적용했습니다.
디자인을 위해 콤팩트한 보드가 필요했거든요.
관심 감사합니다~
Lego wheel
You should've just said diy ripoff cozmo
Plastic plastic every where