V2.0 3D Printed RC SkidSteer
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2023
- This is V2.0 of the 3D Printed RC Skid Steer, new features include a stronger arm, claw attachments and numerous design updates to make for a better 3D printing and building experience.
MINISKIDI 3.0 IS OUT!
Pick up a kit here: professorboots.com/products/r...
Discord: / discord
3D Files: www.printables.com/model/7212...
Code and Wiring Diagrams: github.com/ProfBoots/MiniSkid...
USB 2s Charger: a.co/d/3JIbvDV - วิทยาศาสตร์และเทคโนโลยี
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 1](http://i.ytimg.com/vi/Qs5zdBqLn_8/mqdefault.jpg)
Now that you’ve got mini skidi 2.0, you should do a whole series of mini construction equipment! How about a mini excavator?
Make this comment the top comment!
YES.
yessss
Or a mobile crane, that would be awesome
Excellent idea!:)
Finally someone is not just making more of those 3D figurines, impressive as they might be, they do get old.
THIS kind of 3D printing, combined with cad drawing and RC electronics, is just so freaking cool, it should be available in any Toy/RC/hobby-store globally 🙂
Agreed!
Would love to see more construction equipment! Maybe a dumptruck or a dozer
Would like to see these in V3
A quick disconnect from your servo on bucket so various attachments can be used, forks for pallets, a stump grinder, auger, etc.
It would than be helpful to use a servo wire extender and make a permanent servo connection point at the end of the lift arms for the second servo where the current wires come out. This could than be useful when switching implements so disassembly isn't required to rewire things.
Love this project cant wait to see what else your cooking up!
Building onto the quick disconnect, correct me if I’m wrong, but couldn’t you just add a magnetic connector so that if you had the bucket disconnected you could just back away from it and it would disconnect?
I noticed that pretty early in the video myself, and I actually have the files pulled up right now on my computer looking at what it would take to add that to the arm and possibly a version of SSQA
Honestly with all your electronics knowledge, it would be awesome to see you design a 3d printed 1lb combat robot.
What I'd love to see is a V2.1 with analog controls using a drone receiver and paired to a 4+ Channel radio.
I love the idea of a series on mini construction equipment. My kid would go nuts over it. Well me too lol.
I am quite new to 3D printing and I'm loving this project. Also your videos are super entertaining and high quality! Keep it up man!
Great upgrades and update! I'm pretty stoked to see more of your future projects. I wish you continued success, my friend!
This is exactly what I was looking for. Ordered your kit!
You could add some peel and stick tire weights inside the rear hatch to counter balance the arm. The full size skid steer has a weight back there.
I've already done 1 and 2, so i'd like to see an fpv version of this mini skidsteer. so cool!
Was about to ask for the same stuff.
Dude, nice work with the new version and dedicated Idea. I had a fantastic learning experience.
Another idea. Create some 3D printed objects for a “trials course” and define an official boundary size so we all could compete for best times.
I’m bummed, I re-read my comment you ❤’d above and I noticed I put “object”, instead of “objects”. I edited and fixed which caused the comment to loose the heart you gave. Now I’ll have to find some other way to get validation today, lol. Side note, I ordered a kit from you. Very excited. I’m sure you are a little overwhelmed, but don’t sweat the back order times or any jerks. You are doing great, try not to over do it to where it’s no longer fun and you get burnt out. Comment ending, I’m removing my “dad hat” now:).
Amazing! Construction equipment is such a fun project series! Now you need a dump truck for the mini skidi!
i actually just finished the dump truck, I think you’ll like the video😂
Great work! This project looks awesome! I can't wait to see more!
Flipping awesome!!! This could be my winter project!
Just need to add some ballast to the bottom/back of the Mini Skiddy to get more lifting power out of it! Very cool video, glad I clicked on it. Awesome to see you so excited about projects like this.
As for a future robotics project, I think it would be neat to follow the theme a bit and do more construction equipment, but with the twist of making some of the very early cable driven heavy equipment, like an old steam shovel, just to mix it up a little! Can't wait to see what you end up making. Keep it up!
Nice subtle shout-out on the auger. Not sure I have the time, but time will tell.
I love these 3d printing and electronics/robotics projects! I'm just apprehensive about the electronics and rc parts of it, as I have zero hands-on experience with it.
So glad I just found your channel, and I just love how you break down each step of the process. Also love the project in general, reminds me of a Bobcat Skidsteer I use to have. Now this might be an ambitious ask, but a rc brush mower for the skidi would make it a force to be reckoned with.
Keep doing what your doing, and I'll definitely have to pick up a mini skidi kit myself
First time finding you. Awesome video and project! Looking forward to seeing what you come up with next
Just the project I was looking for! Really like the channel, keep the projects coming.
Would love to see more construction equipment in the same scale as the miniskidi!
Just did 1 and 2! I think a desktop crane would be really cool to load my mini snacks into my mini skidsteer. Love the content!
When I was a kid there was a cartoon called Jayce and the Wheeled Warriors. The toys were all these weird, but cool vehicles. Your skid with the claw reminded me of that. Those vehicles would be cool to reproduce.
This is awesome. Thanks for the great vid. Love the 3d printing, design and electronics combo. Definitely subscribing for more
Great stuff, looking forward to your next project. Forklift is something that comes to my mind.
Now I want a POV camera mounted in the cab and a desktop application with joysticks so I can do yard work from the comfort of my A/C.
Now that does sound nice
I really like the new range of motion with V2.0! For the next iteration, you should make an algorithm to allow automated tasks like digging or moving stuff with a programmable path and task.
Get some lead car tire balance weights and stick them on the back for counter balance. The real thing uses a huge solid steel plate, but small lead weights in that rear hatch would sure help alot.
Amazing job on this project!
Thanks for the update. Great project.
I've been designing my own 3d printed rc car and your journey has taught me several things.
Neat, can't wait to see what kind of other mini construction equipment you come up with.
This is super cool!! The modular possibilities!
Excellent mechatronics project! Love the small scale construction theme. Keep it up!
Just found your channel well happy. This mini series has so much potential. Binge watching 👀 the rest. 😊
Your Visio is amazing. There isn’t a lot of rc heavy equipment so it is great to see one you can make yourself. I think it would be really cool to see an rc backhoe. Once again great video.
Mini or larger excavator would pose some interesting actuator constraints to work with… plus plenty of room for the core electronics
Such a high quality video,dropped a like hope your channel keeps growing at the rate it is rn
Very nice
Definitely making one of these
Growing up i really wanted a Rokenbok set - this is so cool!
Really cool video! Hope your channel gets the recognition it deserves
I think the next project should either be a dump truck (like on of those articulating ones) or a digger. That would be pretty cool to see
First time see this channel and I’m excited! 😊 Good work👍
That project looks awesome. Keep it up 👍
A Mini front loader would be awesome as well as a mini tractor with a trailer to carry the stuff you pick up
T-Rex Mini-Skidi
Picking up the box sort of looked like a stop-motion video, which was really cool.
Amazing project! Very well documented and displayed. I think I need to buy(or win ;) one for my son next birthday. Keep up the good work 👍
This is a super cool project. Reminds me so much of my Anki Vector Robot that is now brain dead because the company went bankrupt. I always loved his ability to use a charging pad. Not sure if autonomous vehicles are your thing, but with your skills you could make a really cool little desk pet that is maybe solar powered and seeks out light to charge itself. Also I used to have an RC forklift and it was loads of fun to play with and this project brings back memories of that fun time. Looking forward to your next upgrade/project.
It’s so cool to see you continuously iterate on this! I’d like to see a version with more sensory inputs to allow for some cool automation tasks!
So, suggestion for version 2.1
- some kind of hollow "backpack" to add ballast/weights into to counter balance heavy loads on the bucket
- a electronics cover that simulates a drivers cab
Dude this bad boy is cool, next step is substitute the shovel with the big brush for street cleaning! Btw amazing job!
Like it. Cad program looks nice as well.
that looks so fun will definitely pick one up soon great job
TH-cam recommendations freakin deliver. This is so cool! Subbed! Can't wait to see more!
“I’m a seasoned mini skidi driver”
I think you mean IM MINI SKIDI CERTIFIED
This is my kind of engineering! First time seeing one of your videos. You've earned yourself another subscriber and buyer of your stuffs.
Just ordered a kit! Time to start printing!
as an upgrade for the claw servo, you could use a double shaft servo. then you could have a connecting arm on both sides to make the grip a bit stronger and more evenly distributed.
putting the connecting arm pivot point farther away from the hinge would further reduce slop in the movement.
real skid steers have weight added to the back of the body to make them more stable when lifting heavier objects.
The only double shaft servos I have seen are larger ones, do you get small servos like these with double shafts?
Amazing work! Would be cool to see a big dumper truck so you could load it up with stuff using the mini skidi!
Great job on the mini loader 😊
Since I’m used to drive this thing on my parents’ farm since I was a kid, I would actually looove a series of tractors and trailers
I think a articulated dump truck would be really cool. Of course a bulldozer too
It's a very nice build, takes a lot of time and was worth it. I bet he made it to take some things off his mind.
Cool set!
This project is great. I love the energy you bring to your videos.
I enjoy seeing the gears and linkages in this video.
Perhaps a series more aerospace focused. A 3d printed rocket and a transport vehicle.
Can't wait for another awesome project!!
Please make the next version in orange! I work at a Kubota dealership, and that would make me so happy.
Love the content man, such high quality :)
Would like to see a ski lift! Maybe for a holiday decoration?
Awesome improvements
This thing is so awesome!!!
I really want to do a mini battle bot. One you could use to battle with your friends!
Great vid my dude! Keep up the good work.
really cool design
Wow ! A perfect autumn project for me. For future you might want to add a snow blade that can either be folding or just turning right or left
RC DrillTank or RC Submarine!!
Brilliant
Very cool design. I sure would love to see a backhoe version of this or even a tractor trailer low boy hauler for some of the future designs to be hauled on. Thanks for sharing.
Amazing project. Can’t wait to make this with my grandson
I want to play with the little skid steer!
Good job on it.
Sir, that is a certified sick mini skidsteer. Wheelie's lookin nice. Amazing video!
😂 if it isn’t Mr. Wheelie man himself. Thank you!
youtube just recommended me this video out of nowhere and i loved it. i just subbed and i have to say, you deserve more subscribers
I loved your channel. Ty for sharing.
This dude constantly smiling. I love it and the mini Skidi. As a small town boy, how about a mini tractor or backhoe? If you do a tractor it'd be cool to see a hay bailer or something you pull behind!
So awesome! Kit ordered!
Would love to see an overhead crane
A 3d printed robotic arm would be cool, like the ones you see in car automation factories, but like a desktop one to hand you your pen or a coffee or something!!
I’d love to see a robotic boat or submersible project! Would definitely be a challenge on a small scale
I tried to build a mini skid steer from scratch and it didnt quite go to plan, this thing looks very polished!
I stumbled across your channel and subscribed just after one video, this is an awesome hobby and its even cooler that you provide the resources for folks to build their own. As far as a future project goes I think it'd be a fun challenge to build your own version of an Armoured vehicle launched bridge (AVLB). Or something inspired by such a vehicle.
I know it would be super hard but a backhoe would be so amazing. This project is awesome, thanks for sharing.
Now you need something for the skid steer to fill! A mini dump truck would be really cool! An interesting challenge would be the lift cylinder.
I would love to see more on the controller side of things, like how to pre-program set tasks for the skiddi or how to make it work with dedicated controllers instead of the phone.
Overall love the channel and look forward to whatever you make next.
would be cool to see a trailer and maybe a tow rig, to take the mini skiddy to the different jobs
this build is amazing keep it up
Extremely cool! Just found your channel and it's awesome! I'm in the process of making an RC BRDM.
(Btw, skidsteers are really fun to drive)
cool project. keep it going!
I’d love to see a front end loader, I don’t believe it would be very hard since it’s very similar to the functions a skid steer has just larger. I work in construction and have printers and would love to see a full set! I am going to print this and add it to my semi truck and trailer I designed so that I can haul it around! Thank you for all you do!!
Great vid! Love the mini skiddy! Needs a dump truck and trailer to go with it.
Love the videos man! Big fan of the mini skiddi. A kind of out there idea for a future project could be one of those magnetic cranes you see at metal scrap yards. That would be a fun video to watch the creative process at work. Keep up the good work man!
You should make a little excavator next! It would go along well with the mini skidi. I was also thinking one of those logging machines with the big claw would be cool but that’s quite similar to this
Amazing work, good job. Looking forward to see you flying a fully 3d printed drone.