The chainsaw carb is a good idea size wise but functionally they don't work at all like an automotive carb with a float bowl, chainsaws and other two strokes are meant to run upside down so a float bowl wouldn't work so instead they have a diaphragm that pumps fuel using pulses from the crank case which is opposite of the vacuum pulses in the intake. And with the large constantly changing crankcase pressure in a small V8 there's likely very little pulse to tap into
I’m in the same boat I really like This kind of stuff building them tweaking them. But holy smokes you can buy a real freaking crate engine for less money
Would be very underwhelming in a 1/5 scale or 1/4 scale. I have a Taylor RC 80cc Supreme gas engine in 2 of my 1/5 scale RC's and they make something like 28-30hp in a 42lbs and 90lbs RC's. Will spin over 16,000 rpm's also.
this engine is actually extremely efficient for what it is, scaled up to a 454 in displacement if it had the same efficiency it would make around 576 horsepower.
It would be awesome to install one of those engines on a bicycle. I’ve seen the crazy e-bike and 2-stroke builds but a mini V8 build would be quite unique since I never saw anyone do that before.
Oh boy the possibilities! RC Car, RC Boat, Scooter, Bicycle, so many options. I think I actually want to buy one of these kits just for the fun of building it and then starting it up. For a mini, it sounds amazing!
i wanna put one on a mini bike holy hell, at 6 horsepower that's actually a usable engine! and if it does 6 horse at 78cc that's pretty dang good! Looks like it already got a head gasket leak lmfao
I doubt it's got 6hp... It would have to scream like a nitro rc car engine to get that. There is no way... If they rated it at 6 it's as honest as all the 1000mah batteries being sold as 9000mah.
@@volvo09Seriously. I dunno though, actual header exhaust, better ignition, better intake and carbs, and run nitro, I'll bet you could something like 6 horses
I'd sort that dizzy cap before trying to run it too much. Depending on how much compression those little pistons have could easily do some damage if it's not firing on that one pot. The bowls may not be filling because it needs more pressure. I bought a really good 5psi fuel pump off of eBay for my moped to get rid of the vacuum fed one. If you ran a return line to bleed off 2 or 3 psi like I have the carbs get plenty of pressure and anything it doesn't need goes back to the tank.
Like to give pisitive input about your 2 carburetors. . . . . They are normally found on weedwackers, blowers, and trimmers. The primer bulb is meant to remove air from the fuel flow. There should be no air going in one line and out the other. If there is bubbles of air, then theres an air leak. When your putting a carb back together, it needs to have an air tight seal to prevent air leaks. This is accomished by applying lightly a finger smear of grease on both sides of the gaskets. Then press together with screws. Then test for drinking. Once its found that no air is coming or going from the carburetor, then it should function properly. The primer bulb should be normally full with a tiny bubble, or normally half full. When pressing.
Plastic screws in distributor . We used to paint the inside of the distributor with clear nail polish when they cracked or keep tracking spark lol . Old school trick . Need filter on fuel .... bigger intake trumpets lol
@@Deeveeaar yeah finally getting back to work after the pandemic, and went on here forever. then for almost an entire year I was developing and building the system for the Tesla.. it was an engineering nightmare.
When he says he thinks it will surprise us what he's going to do it. I think he means "FORCED INDUCTION" haha but for real, glad to see you with some new videos lined up and still wanna see that LED in action for these videos. More slow-mo!! Thank you and keep it up brother.
I love doing those slow motion videos, and you're right I can't believe you remember the light but it's sitting there collecting dust, I have to put it to work very soon. One of my biggest challenges has been trying to figure out how I can diversify things to make them fit on my channel. But I think I figured it out
@@WarpedYT Always good to hear you working up new ideas! I remember the light because I think it's one of the most significant things you've done along with the clear turbine housing. 🤘🤠
It's nice to see an engine large enough to do some real work. If I ever got rich enough to recreate a car, I'd do the cartoon version of Speed Racer's Mach 5, and want to power it with a BRM 1.5 Litre V16 because it sounds like the cartoon Mach 5. While the engine is physically much larger on the outside, the model engine parts may be the right size to help recreate the V16. I'd probably make it a hybrid because the BRM engine was totally unpredictable in making power.
The hard part is going to be coming up with a 453-speed manual gearbox. In EVERY SCENE EVER the M5 is going "arrrr-arrrr" and shifting gears. He probably got 3mpg cause he never cruised anywhere, just shifted gears.
I have all the footage for that, I'm just thinking about how I can spin it to make an interesting, I have so many other projects right now that are absolutely nuts
Wow thats a really cool engine! Looking forward to seeing what you will do with it. I'm currently trying to design and cnc my own opposed piston engine from scratch, so these videos are really interesting!
I binge watched a few of your videos right now. You definitely gained a sub. 😎 I work on fighter jets and their engines as well in real life as my occupation. Its amazing to see it in miniature form. Edit: fixed typos
If I had the money or the backing I most definitely star producing a 2.5 litre half scale V8. And I’d bet anything those things would fly off the shelf . Perfect for cross cart racing .
I'll always be amazed when small engines have multiple horsepower. Imagine telling someone 200 years ago, "See that metal box thing? It does the work of 20 horses"
I'm very intrigued to see how this works out. I want to put one on my son's little electric toy four wheeler, it only has one small electric motor for one tire, not the whole axle. So it often gets stuck in grass. So ide love to see if this thing not only works properly after a little modification, but also would be able to be connected in some way so he could actually drive drive his four wheeler around the yard and never gt stuck, but not go too fast to where he can't control it
Adjust the idle for more rpm and use a better oil that's thinner and full synthetic.try using camping fluid for fuel,might be better for miniature ice builds,I knew someone that used it.
With the hat and hair you look lioe that 80s kid actor Jason Hervey! I know you know because were close to the same age! Love your efforts and videos as always Matt. Keep em coming please.
I love this engine n i cant wait to see u use it in future projects! Like how fast a remote control car would be with it lol! I love the sound of it to! I love your swag you got going on with the glasses n chain hahaha! That was really cool n sick lol. 😎🤙🏼👌🏼
Me too, I have a whole backlog of videos right now, I want to just make some cool stuff. I got stuck working on the Tesla all last year then the Mr Beast projects for like the last 8 months. Intense amount of work
Hahah.... I nowI feel like I'm on vacation, the last year and a half have been nothing but monumentally challenging projects... And then I was working on a few Mr Beast projects, really tough stuff
I raced Go-Karts as kid. At a whole 9hp pushing 365lbs give or take 2lbs😂, but the kart was fun. If you can get 9-12hp, plus V8, not a single as I ran. Fun, no matter what.
Well my little niece has been bugging me for months to grow out some hair, I usually always just cut it completely short for lack of maintenance, I think this is a good balance haha
if your not an engines person. you probably look at the 6 hp as a small single digit number. Or maybe you just dont know what to think of it. But even though this little engine might not be tuned/designed to break miniature dyno's. To help your perspective. This tiny lil fella puts out more hp than lawn mower engines 2-3 times its size
Looking forward to seeing how you setup this engine!
Todd has time to publish his weekly video and make it over here to support a fellow creator. Keep it up!
I was about to say the same thing and I appreciate your last octane video now I can save a few bucks putting supreme in my small engine equipment.
V8 gokart please 😊
Hello Todd. 😁Me Too.
Like the way yiu do things , be good if you mentioned how much it cost as well ... Will be interesting see what you put the v8 into...
The chainsaw carb is a good idea size wise but functionally they don't work at all like an automotive carb with a float bowl, chainsaws and other two strokes are meant to run upside down so a float bowl wouldn't work so instead they have a diaphragm that pumps fuel using pulses from the crank case which is opposite of the vacuum pulses in the intake. And with the large constantly changing crankcase pressure in a small V8 there's likely very little pulse to tap into
I think your right
1st thing I said he needs a fuel pump. And a water pump probably a oil pump too
The small multiple cylinder engine tests are definitely one of my favorite genre of your videos! Please keep them coming! 👍🏻🇺🇲
It's funny because they're really interesting.
Honda's inline 250 4 cyl. Was a screamer in the early 80s too
100% gonna be keeping an eye out for more of this engine. i could never justify getting one for myself so seeing them is the next best thing
I’m in the same boat I really like This kind of stuff building them tweaking them. But holy smokes you can buy a real freaking crate engine for less money
Yeah they up around 6 or 7 thousand , not cheap
Why not let the parts be 3d printed in metal by some company? @@oneanddonetzone3673
Would be awesome to see this in a scooter
Its interesting. Its the same CC as my scooter 1-cyl engine. It sounds amazing, but I think that its prob not actually built strong enough to last.
V8 powered GOPED was gunner say until I seen your comment
And supercharged.
Or in my Lounge
Razor single seater
This would be great in a large RC car. If you have a big block show car, putting this in a 1/3 scale model would be awesome.
Would be very underwhelming in a 1/5 scale or 1/4 scale. I have a Taylor RC 80cc Supreme gas engine in 2 of my 1/5 scale RC's and they make something like 28-30hp in a 42lbs and 90lbs RC's. Will spin over 16,000 rpm's also.
Don't confuse an engine's HP with an engine's torque. I'd rather have stump pulling take-off and acceleration over top speed.
@@tjkj-om9oi I just guessed at the scale. Whatever scale these engines are, I guess.
Also with a big blower out the hood
@@tjkj-om9oiJESUS
this engine is actually extremely efficient for what it is, scaled up to a 454 in displacement if it had the same efficiency it would make around 576 horsepower.
It would be awesome to install one of those engines on a bicycle. I’ve seen the crazy e-bike and 2-stroke builds but a mini V8 build would be quite unique since I never saw anyone do that before.
This was my first thought.
I just got 4 stroke weed-wacker engine.
That's good enough for me!
That was actually my first thought lmao
It's very disappointing how many of us now get our automotive enjoyment from watching miniature hobby model V8's running on a workshop bench.
That amount of starter fluid for such a small engine made my head hurt.
Lol
Just gotta send it.
Yeah bad could of started a truck with that much😂😂😂
You’re definitely one of those people that spews out bullshit like “uSiNG StARtER FLUiD wILL RuiN aN eNgINe”.
Same 😂😂😂 I was curious how it would handle it considering I use about that much to get my old work van going 😂😂😂
Oh boy the possibilities! RC Car, RC Boat, Scooter, Bicycle, so many options. I think I actually want to buy one of these kits just for the fun of building it and then starting it up. For a mini, it sounds amazing!
Mounting it on a bicycle with a moped cvt would be insane lmao
@@TM450FI , hell yeah, v8 motorcycle.
IKR?? Im putting one intio a moped/small motorbike frame!
i wanna put one on a mini bike holy hell, at 6 horsepower that's actually a usable engine! and if it does 6 horse at 78cc that's pretty dang good! Looks like it already got a head gasket leak lmfao
It probably doesn’t have much torque.
I doubt it's got 6hp...
It would have to scream like a nitro rc car engine to get that. There is no way... If they rated it at 6 it's as honest as all the 1000mah batteries being sold as 9000mah.
@@volvo09Seriously. I dunno though, actual header exhaust, better ignition, better intake and carbs, and run nitro, I'll bet you could something like 6 horses
0.6hp maybe, if you're lucky. these things only seem to run right at idle.
We will see
I'd sort that dizzy cap before trying to run it too much. Depending on how much compression those little pistons have could easily do some damage if it's not firing on that one pot.
The bowls may not be filling because it needs more pressure.
I bought a really good 5psi fuel pump off of eBay for my moped to get rid of the vacuum fed one. If you ran a return line to bleed off 2 or 3 psi like I have the carbs get plenty of pressure and anything it doesn't need goes back to the tank.
43 seconds in and I'm clicking sub.
Ain't even heard it yet! Those engines are works of art before they even run! Greetings from Canada!
Giving that much ether to a new born engine, is like handing a new born baby a Pack of Marlboro Reds
I also like how most of it just pooled around
That would make an awesome lawnmower or generator!
lets hook that up to a good car alternator and watch the dc energy pour out like rock n roll!
As always this is just super cool content! Thank you for all the effort you put into the channel!
Thanks and your welcome
Like to give pisitive input about your 2 carburetors. . . . . They are normally found on weedwackers, blowers, and trimmers. The primer bulb is meant to remove air from the fuel flow. There should be no air going in one line and out the other. If there is bubbles of air, then theres an air leak. When your putting a carb back together, it needs to have an air tight seal to prevent air leaks. This is accomished by applying lightly a finger smear of grease on both sides of the gaskets. Then press together with screws. Then test for drinking. Once its found that no air is coming or going from the carburetor, then it should function properly. The primer bulb should be normally full with a tiny bubble, or normally half full. When pressing.
That's an awesome little engine! I'm sure you can make it far better. AND, that was a wild get up you had on LOL. Full gangsta.
Lol... Thanks
Really cool man, looking forward to seeing ore of this, welcome back
That thing sounds so good
Plastic screws in distributor . We used to paint the inside of the distributor with clear nail polish when they cracked or keep tracking spark lol . Old school trick . Need filter on fuel .... bigger intake trumpets lol
Wow that is incredible! Can't wait to see what you will do with this!
McDonalds drink
Lol.... Great idea, a McFlurry hahah
Bro nice to see you here ! Hope ur doing well.
@@WarpedYT Couldnt be doing better! Hope same goes for you! =)
@@Deeveeaar yeah finally getting back to work after the pandemic, and went on here forever. then for almost an entire year I was developing and building the system for the Tesla.. it was an engineering nightmare.
When he says he thinks it will surprise us what he's going to do it. I think he means "FORCED INDUCTION" haha but for real, glad to see you with some new videos lined up and still wanna see that LED in action for these videos. More slow-mo!! Thank you and keep it up brother.
I love doing those slow motion videos, and you're right I can't believe you remember the light but it's sitting there collecting dust, I have to put it to work very soon. One of my biggest challenges has been trying to figure out how I can diversify things to make them fit on my channel. But I think I figured it out
@@WarpedYT Always good to hear you working up new ideas! I remember the light because I think it's one of the most significant things you've done along with the clear turbine housing. 🤘🤠
Great job on the latest Mr.beast video! That was awesome 👏
Thanks! It was rough, I didn't have sleep for 3 weeks.
Would be awesome on an RC jetboat!
It's nice to see an engine large enough to do some real work.
If I ever got rich enough to recreate a car, I'd do the cartoon version of Speed Racer's Mach 5, and want to power it with a BRM 1.5 Litre V16 because it sounds like the cartoon Mach 5. While the engine is physically much larger on the outside, the model engine parts may be the right size to help recreate the V16. I'd probably make it a hybrid because the BRM engine was totally unpredictable in making power.
That V16 sound was heavenly
The hard part is going to be coming up with a 453-speed manual gearbox. In EVERY SCENE EVER the M5 is going "arrrr-arrrr" and shifting gears. He probably got 3mpg cause he never cruised anywhere, just shifted gears.
So, when's the video about the MrBeast rocket car? Would be really cool to see behind the scenes and the story of how you built it!
I have all the footage for that, I'm just thinking about how I can spin it to make an interesting, I have so many other projects right now that are absolutely nuts
please put this on a bicycle!!!!!!!!!!!!!!!!!!
They're called motorcycles!
Always loved the mini motors!!!
The more accurate the motor the better.
Bro's the defenition of bling life 😂
That coke dealer vibe
Lol... I like the vibe but I made more money using my skills tbh.
@@WarpedYT i mean making a jet car for mr beasts latest video, i have no doubts for you talent ,is there going to be a video on it?
Fantastic
Wow thats a really cool engine! Looking forward to seeing what you will do with it. I'm currently trying to design and cnc my own opposed piston engine from scratch, so these videos are really interesting!
Great video. I like the colab with MR BEAST! 👍🏻🇺🇲
Thanks
How does it sound with some 40 series flowmasters?
I binge watched a few of your videos right now. You definitely gained a sub. 😎 I work on fighter jets and their engines as well in real life as my occupation. Its amazing to see it in miniature form.
Edit: fixed typos
Where do you buy these 😅😅😅😅
From sri lanka 🇱🇰 it's handmade my engine
Stirlingkit or enginediy
New guy hasn’t grasped how Google works 😂
@@AutomotivewithVIDUshut up 💀💀💀
@@Zeddify Go to kitchen 👍
I was going to break it in but i decided we will just rev it to the sky and see how fast we can spin it. Its wierd how it wont stay running hmmf.
If you made this video for me why's it takein 9 months for me to see it
The content I've been waiting for!
Thanks
Now THAT sounds like a 4-stroke mini engine, unlike so many others on here.
Can't stop staring at the Mr. T Starter Kit gold chain
If I had the money or the backing I most definitely star producing a 2.5 litre half scale V8. And I’d bet anything those things would fly off the shelf . Perfect for cross cart racing .
These little engines always make me smile.
Good to see you back man.
2:06 that crossplane growl 🥴
Very cool!
Wow and still sounds better than any honda. Thank you
I'll always be amazed when small engines have multiple horsepower.
Imagine telling someone 200 years ago,
"See that metal box thing? It does the work of 20 horses"
A giant RC airplane like a P-38 Lightning would be a honorable application of these engines,,,a V-12 would be a prized application 😁
Glad to see you back. I probablly watched the seethru engine series at least 5 total times
😊... Thanks so much, I need all the help I can get I'm about to launch my channel into a different gear this season
Nice to see you back to making new videos!
Sweet brass chain boy !
I'm very intrigued to see how this works out. I want to put one on my son's little electric toy four wheeler, it only has one small electric motor for one tire, not the whole axle. So it often gets stuck in grass. So ide love to see if this thing not only works properly after a little modification, but also would be able to be connected in some way so he could actually drive drive his four wheeler around the yard and never gt stuck, but not go too fast to where he can't control it
Honestly wouldn't be disappointed if one ended up on a lawnmower. For ya know... tough lawn jobs.
Adjust the idle for more rpm and use a better oil that's thinner and full synthetic.try using camping fluid for fuel,might be better for miniature ice builds,I knew someone that used it.
That thing is pretty cool!
Extraordinary. Bravo!
It actually sounds like a v8, I can never seem to find a video with mini v8's that actually sound like a classic muscle car.
love the new look. welcome back!
Lol thanks!
You gotta blow up one of these tiny V8 engines. Like redlining it until it throws a rod.
Agree
With the hat and hair you look lioe that 80s kid actor Jason Hervey! I know you know because were close to the same age! Love your efforts and videos as always Matt. Keep em coming please.
I actually don't know who that is, but I'm going to look it up right now in the 80s I was a toddler.
I just looked them up, yeah he looks familiar, he's a bit older than me even though it doesn't look like it, but I sort of kind of recognize him
you should make a scooter powered by this engine, like one of those electric ones. love it!
The CHAIN MAN!!!! love it!!
Brother I love your videos! You are the man! Your get ups crack me up 😂
Please push the engine to the limits. But the right and clean way.
Would love to see!
Hey those little motors are so badass man
I love this engine n i cant wait to see u use it in future projects! Like how fast a remote control car would be with it lol! I love the sound of it to! I love your swag you got going on with the glasses n chain hahaha! That was really cool n sick lol. 😎🤙🏼👌🏼
I love your videos, thank you for sharing!
Thank you for watching
Build an awesome mini 4x4 and put the engine in it!
Bro, that would be a dope little engine to put in a small kart for fun!
Beautiful...nice vid...can't wait to see what you cook up!
I can’t wait. This sounds exciting 😀
Wow, really cool engine! Looking forward to what you have planned!
The 80s call they want their style back😂
1:16 physically hurt me. Use the right Allen wrench man.
Glad you are back!
Me too, I have a whole backlog of videos right now, I want to just make some cool stuff. I got stuck working on the Tesla all last year then the Mr Beast projects for like the last 8 months. Intense amount of work
Looking forward to seeing the worlds first V8 Weed Whacker tear up some dandelions!
Oh man!!! Big thing is coming!!!
Congratulations, it is a beauty
Good to see the crazy man is back..
Hahah.... I nowI feel like I'm on vacation, the last year and a half have been nothing but monumentally challenging projects... And then I was working on a few Mr Beast projects, really tough stuff
I cant make a guess, but I am sure I'm gonna like it!
the chain and the glasses made me laught 😀 nice one!
That engine is beautiful
Fire waiting to happen . If your not aware , sparks and gas do not mix but keep going , I want to laugh
Totally incredible this is really incredible
I raced Go-Karts as kid. At a whole 9hp pushing 365lbs give or take 2lbs😂, but the kart was fun. If you can get 9-12hp, plus V8, not a single as I ran. Fun, no matter what.
Crazy it has a water pump that's awesome
Yes seems like a good water pump too.
That thing sounds SO GOOD 😫😫😫
Cant wait for the next setup. you can tell she wants to run.
I feel the same way you can hear it
Cool engine for Barbies Motor home. Your absence was noticeable! Can't say I'm digging the new do and fashion though.
Well my little niece has been bugging me for months to grow out some hair, I usually always just cut it completely short for lack of maintenance, I think this is a good balance haha
Hahahahaha, the tears in my eyes! This thing is amazing and hilarious!
first time ive actually seen someone to get it to idle and not just die
Soooo friggin sweet, thanks for the content!
Swap that distributer bolt for nylon and keep going.
I'm fascinated by this. Just awesome
if your not an engines person. you probably look at the 6 hp as a small single digit number. Or maybe you just dont know what to think of it. But even though this little engine might not be tuned/designed to break miniature dyno's. To help your perspective. This tiny lil fella puts out more hp than lawn mower engines 2-3 times its size
An inspiration for a lot of engineers. New and old.
If i would have the money, my favorite hobby would be to buy every miniture gasoline 4 stroke engine and build them.
I showed this to my girlfriend and she’s like what are you gonna do with an engine? You already have a Honda Civic. I’m gonna run it