I Build REAL V8 Engine | Assembly and RUN
ฝัง
- เผยแพร่เมื่อ 3 พ.ค. 2024
- Today we will assemble with you a real small V8 Chevrolet engine (Cison V8 OHV), and also test how it works and sounds.
Engine:
Cison OHV v8 engine: bit.ly/3WeChjh
Cicon Flathead V8 engine: bit.ly/4ddkjE3
V8 engine kits in Stirlingkit: bit.ly/44jCwf5
Many thanks to @Stirlingkit for this engine model kit.
#engine #v8 - แนวปฏิบัติและการใช้ชีวิต
![ใจดำกับฉันก่อน - วงทัพห้า [Official MV]](http://i.ytimg.com/vi/I48wa4qurAU/mqdefault.jpg)
That thing cost over 3 thousand dollars in Australia. It’s actually cheaper to buy a real V8 from the wreckers
That's what I was thinking, it's legit cheaper to get a 350 small block and rebuild it😭
Try to get a new block it will be like 3k
Yeah but if you buy this set it's not because you desperately need a V8.
💀😩😂
Temo 20 dollars 😂
426 Hemi
Boss 429 and
427 SOHC. Just a few iconic engines that should be built.
No, this one is actually a mix between a 440 Mopar / Chrysler B engine and a Chevy small block.
that sound sounds EXACTLY like the real engine!
no it does not lol
This is the engine model I always dreamed of my entire life !
Can't wait until complete cars and trucks are Made !
You and me both Richard 🍻👊🇦🇺🦘
People do actually put them in RC cars. Though, these engines are INCREDIBLY expensive. Its cheaper to go to the junkyard and get a real one and rebuild it with stock parts lol
The technology to create this miniature scale motor is just amazing.
Even model v8 sounds like music to the ears)
i nearly cried when you revved this puny engine, it's so cute
Now that is a small block,!
I LOVE CISON!! their I4 sounds genuinely better than real i4s do. And we finally have a pushrod, 4 barrel carburated, true American v8 model!
Thank God you showed the extension of the knife blade snd the exquisitely comprehensive tracing around the crack of the box top!
However would we have guessed how you managed that?
Those main bearings look like they'll be spun super quick! There's nothing keeping them aligned or tightly fit. It's such a great miniature too!
Look at 4:28 in the video. They appear to be pinned from the bearing main cap side. (the silver hex screw)
I'll watch it later. When I go to sleep
Hehe me too ❤😂
me too😂
why?
@@Stirlingkit for better sleep
ok good ,where possible to purchase ,cordialement
Whoever's making you this kit is truly a fanatic That's for sure. I can't see how anybody could make any money producing all those parts but there it is, just amazing.
Hard to say what was more awkward, the silence or the black rubber gloves. An impressive build nonetheless.
14:20 it's aliiive!! Wraaap wraaaap 🤩
와...점화플러그에 워터펌프까지...진짜 리얼엔진 이군요 ㅎㅎ
It’s all Gook to me!!!
Setting the lash, incredible.
No way a mini pushrod v8! Finally!
check out ''V8 / V10 / V12 model engine build on utube, been around for maybe 20 years now. Off the shelve and home machined - milled. Some amazing incredable builders around - enjoy :)
I have been staring at mine for days. The mounts need to get here already!
Now you need a mini Dyno.
Скажите, пожалуйста, кто Вы по образованию? Невероятно !!! Просто получаешь кайф от просмотра видео!!! Спасибо огромное❤❤❤
Bowtie gearheads rejoice! 🥰 You can still get a smallblock chevy, even if it is tiny! What a cool piece of engineering…..even if it won’t run through the quarter mile!
What a fantastic video who would have ever thought this could be done? I wonder what you could put that engine in totally awesome great video thank you.
Вот это моделька.... Свечи, распределитель зажигания.... Все как в реальном ДВС.
Incredibly beautiful work
Build and assembled almost the same thing, but the difference is enormous
Hey, thanks so much. I got the kit a couple of weeks ago and have been waiting for a build video. You are the first one.
where’d u get it?
I loved the video but am mesmerized more by the editing🎥🎬
Such an artwork! Vibration when running is pretty huge, tho
I absolutely want to do this build now. Great job.
Awesome work! Great model V-8 engine! Cheers!😀👍🛠️🔧
Fantástico, nunca pensei ver um motor tão pequeno a trabalhar. Excelente trabalho, parabéns
F*cking AMAZING!!! I was riveted!
Oh man, that screw strip @ 11:07
Fantastic video ideal for a young apprentice wanting to build engines 😊
Definitely a good way to learn how to build one
Woow, wet sleeve v engine, my favourite! Well done!
TikTok inspired me to play this back at 2x speed and it was great!
Great job... attention to details is important regardless how big or small an internal combustion engine is. Mine started out like yours, but added 90% Nitro-methane and 10% Methanol. It's a real screamer and just like real Top Fuel Dragsters, mine needs to be rebuilt every 10 seconds. For my next trick, going to make my RC Dragster hit 330 mph in 1,000 foot run on drag strip... pass the replacement parts....
That is a pretty cool engine so detailed and so realistic well it is realistic because it’s built for RC cars and stuff like that to make it look realistic. it is real
That looks like a great quality product.
Absolutely amazing
9:57 thru 9:59 One of the intake O-rings on a cylinder head was not in its groove when the intake manifold was installed.
Sounds like a full size V8.
Love the carb!!!
That is funny, totally amazing, and super cool all at the same time! That tiny little carburetor, headers, and plugs! What a hoot. And that sound! Damn that's funny!
I absolutely loved this video ! Thank so much for your skills with. 👏 ❤
What skills??? He put together a toy!!
now that you have a lot of experience on 3D modeling...could be nice If you design the entire car..and then fit this engine on it...
lol
the preference your favorite car or one really famous cara from a movie
I'm still enamored with how well that mini 4bbl carb works...
It didn’t actually have a four barrel. But actually a single.
The price is high, but look at all of the detail that went into this thing. I think its a really cool build.
Damn the details this SHIT wayyyyyyyyy over priced
Almost perfect miniature of a small block Ford 302/5.0. front mount distributor, equal spaced exhaust ports etc. beautiful. Too bad they're so damn expensive.... otherwise I'd buy all these miniature engines, inline 4 and 6, v twin, V8, v12.... they're all awesome
Ogni video è sorprendente wow giuro che mi hai fatto rinascere questa passione un po’ assopita da anni.👏👏👏👏👏
It sounds great!
This was cool. To bad it didn't come with a bigger cam for that good lowbing sound.
When will we see 3-4 of these in a rc puller?
More video of the engine running please.
Did Chev engine not had distributor at back?
Only Ford had the dist in the front in that 50s/60 era; Chevy and Dodge's small blocks had them in the back 👍
mais um trabalho bem feito
Wow you’re so fantastic you just put a model together
Why be a douche tho?
Remove the cooling system and install a temperature sensor and show how much С°
wish they made a scale version of GM's 3.8 V6. i'd get one just to have something to learn to deal with my engine on.
I wonder when they're going to put the rear main seal and front crankshaft seals in?
All the folks complaining about the price obviously haven't ever built an actual engine. These engines go in rc cars/trucks. These things are awesome and I definitely plan on buying one soon
Please explain???I built a 400 small block out a couple years back that made around 460 hp i allready had the bottom end and even with new heads I only have around $2300 in it and it is in a actual car that I can get inside and drive up and down the road! This a $3000 toy!! A toy!! And you’re bragging on it! No wonder our country is so fucked with slush heads like yourself just throwing money away because you can! Im beyond certain you didn’t work for that money and if your parents are still alive the shame they must feel for leaving you money so you could waste your life and build $3000 toy engines. 😢
Thats the entire point this isn't a actual engine its a toy. Only a idiot would pay 3k for this
That is just so cool!
Pretty cool I love it 👍👏👍👏👍👏👍👏
I was waiting for a video like yours to assemble mine :) Does it still runs on premix or plain fuel ?
Agora eu sei montar um v8
Omg- the tiny spark plugs!
Could this engine actually be used for something very curious
$2000.!?! may as well build a real one!
They have different use cases.
I`m in France at the moment and wondering if this type of engine would power a small inflatable boat carrying about 40 men?
Next time I rebuild an engine I think it would really help to become a giant a times to move things that easy.
does that engine run on reg pump gas we use in are cars we drive or the nitro mix
With spark ignition... I wonder if you could re-jet it for gasoline?
Nice! Did you tune and dyno it too?
This is also good but I like car restoration more 😀 Those who are like me like it❤❤
I noticed the front end of the rear mains didn't have any Brash.bearings.
This is sick
Awesome. 👍🏻
Looks like a Buick motor distributor is in the front Chevy is in the back.
I love it!!
The only type of engine that does not require a torque wrench for assembly 😁
best I see yet
Day one asking for you to make a 1980 Pontiac Thunderbird, maybe with a low wide body, maybe a big air intake to, but I'd be happy if you did a Pontiac either way, pls and thank you, love your vids by the way.
Ford Thunderbird, maybe?
I can’t believe you could buy a full ass engine for a little more than this thing costs
Big Boy Toys
Very Nice
No valve cover gaskets?
Still more torque than a Honda. 😮
ASMR V8 video.
интересно, какой ресурс этого двигателя?
Holy crap this is cool
Da para montar ,em algum caminhão RC escala 1/14 ??
I love it
Awesome!
Does this come with the tools also…ie wrenches, and whatnot?
Hombre ver este contenido. Hombre ser feliz. 😂
My toxic trait is that I would be trying to make my own performance mods for it and have it shooting flames out the exhaust 😂😂
Those spark plug gaps were bigger than an actual engine
What Chevrolet had a front distributor? I think i seen a pontiac or buick engine with one but not Chevy. The small blocks i know habe them in the back
Sooo cool
Stop playing! Did you hear how it sounded when he reved it up! Wow