Dana 50 and Dana 60 Hubs and Spindles
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Are you looking for hubs or spindles for your Dana 50 or Dana 60 in 1978-1997 F250 or F350? We've got you covered.
Our spindle is a brand new Torque King®, USA made, Forged and Hardened Chromoly Front Axle Wheel Bearing Spindle for all 1980-1997 Ford F-250 and 1980-1985.5 F-350 4x4 trucks with the 4500 lb. or 4600 pound rated capacity Dana 50 Independent Front Suspension (IFS) front drive axle.
Our hub is 100% USA Made from high-strength nodular cast iron for increased strength over stock. Precision CNC machined. Plated for corrosion protection under durable black finish.
1978-1979 Wheel Studs specific to new hub torqueking.com...
1978-1994 Wheel Hub torqueking.com...
1995-1997 Wheel Hub torqueking.com...
1980-1997 Dana 50 Spindle torqueking.com...
1978-1979, 1985-1991 Dana 60 Spindle torqueking.com...
1992-1996 Dana 60 Spindle torqueking.com...
Almost $700 for a spindle and almost $600 for a hub. Granted, these are "buy once, cry once" parts... but have the prices gone down any since the introduction?
We have started producing these parts in lager quantities since introduction which offsets costs, however raw material cost has doubled in the last year or so.
On the bright side, they remain US manufactured out of US material.
Can’t stop laughing at your prices!
pretty cheap compared to replacing a vehicle, right!
Frankly, I think that the prices are pretty reasonable considering what they are offering here. Stop thinking of these as junk replacement parts for your junk truck and view them instead as high quality aftermarket upgrades for your desirable components. The deal here is fair.
I have a 1993 f350 7.3 idi non turbo what does the spindle and hubs run for this truck
That should have a Dana 60 axle, if so here is an exploded view with all the parts listed. torqueking.com/product/sku/xv1013-exploded-view-1992-1994-ford-f350-dana-60-front-axle/
I'm looking to use my f250 hubs on my danna 60 purchase because I'm doing an axle swap . Can you point me in the direction on this with a video
F250 Dana 50 hubs are the same as Dana 60. DRW/SRW is also interchangeable
Spindles, knuckles, and axle shafts are not interchangeable.
Can you retrofit a 95 dana 60 hub on 1998 on up axle?
Can a 94 ford dana 60 be retrofit to a 98 on up dana 60? Im looking to put the full hub assembly from the ball joint to hub
There are several differences between the housings, but we have not gone through to see what is needed to convert a newer Dana 60 to a hub/spindle setup from older parts. There are conversion kits available though. torqueking.com/category/hub-kits-dynatrac-free-spin-1999-2004-ford/#y=777
@TorqueKingTV gotcha yeah I'm looking to put the older hubs on a newer 60. For my 94. Want 3:55 gears. Just seeing if there was a cheaper why to make it happen with out tearing into the houseing
@@nohtgonahappen7314 I remember seeing stuff about this conversion years ago, but don't remember the details. Info is out there somewhere though.
Do you make dana 50 ttb dually hubs or can I use dana 60 hubs on my spindles?
Hi- you would use Dana 50/60 wheel hubs with these adapters torqueking.com/product/42176/tk42176-9-16-srw-to-5-8-drw-front-adapter-set-for-85-97-f250-f350/
If you already have 60 DRW hubs they will work.
@@TorqueKingTV I don't have drw front hubs for a d60 but if they work I'll find some
will ford dana 50 hubs fit in a dodge dana 60 front end?
no they will not, see this part torqueking.com/product/4962/tka4962-splined-4x4-front-wheel-hub-for-srw-dana-60-chevy-dodge-gmc/
Can you put the 50 ttb hub and spindle on a 44 ttb?
No, they are completely different.
That is weird ...as I was at a local wrecking yard where they took apart what looked like a Dana 50 ttb ...it had the small axle shafts / u-joints ..BUT yet had the large Dana 60 outer hubs 🤔
Need price
torqueking.com/category/1980-1997-ford-f250-f350-4x4-front-axles/
what is the difference between a Chevy 1971 4x4 Dana 60 front spindles and the 1978 and newer, will the newer spindles Fit my Truck ?
No, the spindles are different from 1971. Dana also does not list a Dana 60 for any front application until 1974, so if it is a 60 it will be a transplant. We would need the axle number stamped in the tube to identify a correct spindle, or the stamped number off your old spindle flange.
How about 60s for a 2001 dodge?
Those are a non servicable unit bearing, we list both ABS and non-ABS versions here: torqueking.com/category/hubs-2000-2002-ram-dana-60-front-axle/
Also, we offer Dynatrac conversion kits to make it a separate hub and spindle like this video torqueking.com/category/dynatrac-freespin-kits-2000-2002-ram/
@@TorqueKingTV sorry I guess I should have specified, it’s a Dana 60 rear axle in a 2001 dodge.
I know the fronts are sealed units.
I assumed you’d know I was talking about replacement spindles and hubs for a rear axle.
Since that’s where these go.
@@jaxturner7288 These are front hubs and spindles. Besides rear semi float to full float conversions, rear spindles are welded to the axle tube. We have some hubs listed, but a spindle will require professional replacement by The Axle Doctor or similar company.
@@TorqueKingTV Christ they look just like the bolt on spindles and hubs that are on my Dana 60 rear axle.
@@jaxturner7288 The bolt flange is just your brake backing plate support. It makes too much sense to have replaceable components all around, the manufacturers make more $$$ selling new vehicles.
Make the 4wd dually hubs no one does
Hi- no we do not, but we can supply the proper adapters for DRW applications.