Cam and Carsons dynamic is so damn funny! I finished my apprenticeship last year and still get the older guys talking smack, certainly gives you a reality check when you need it! Looking forward to more from these two!
@@TekamoHD That's what I like to hear! Did my apprenticeship through the site I currently work on, maintaining and fixing offshore wind turbines here in the UK. Doesn't matter what it is, if it's mechanical I'll throw a wrench at it and enjoy doing it!
Love these series!! Just swiched career from doing maintenance and repairs on aircraft towing machines, flying all over the world. To now be doing maintaince and repairs on excavator and other heavy machines in my hometown in Sweden. Starting in two weeks, can't wait.
@@TekamoHD kind of both to be honest. The company that owns the equipment is starting their own shop so I will be their first and only mechanic. Will be doing both fieldwork and shopwork, on my own but for them😅 so independent but for a company 🙋🏼♂️
Hey guys! The extended version releases tomorrow and part 2 is being worked on right now. Thanks for the love everyone. And if you're an HD mechanic from Texas shoot us a message media@tekamohd.com
@@TekamoHD I was a light vehicle mechanic for 6 years & now currently doing the heavier side for the last year, working on rollers, excavators, big difference than working on cars but the bigger gear is awesome
Yo how you and your apprentice banter is exactly how me and my boss banter. My boss and me sat in a trailer yesterday eating pizza and it was just a banter. He claims he hates but I know he loved me
On a Doosan DX220, also no better way to relief pressure on the supply lines, BUT it would have helped if you didn't pull the rod back to full stroke... just saying🙂
@@TekamoHD not sure yet, I don’t start until June 7th. Lots of training to do first lol! But of course you’ll be the first people to know 😎 I’ll be sure to bring some TekamoHD stickers down with me 😉
Man i love doing cylinder reseals love it done a bunch with my dad breaking those big nuts lose with 1" breaker bars and torque multiplyer awesome brings back memorys 🤣👍👍
PITTY U DIDENT CHANGE ROD CAP SEASLS WOULD LIKE TO SEE U OPEN BIG NUT ON END OF ROD CRIST THEY CAN B TIGHT DONT TING U VICE HOLD IT I PUT ROD BACK IN DIPPER BOSS PROP ROD UP WITH BIG TIMBER PUT HOME MADE SPANNER ON NUT PRESS DOWN WITH OTHERT DIGGER TO LOSEN SAME WHEN U PUTTING BACK THEY HAVE TO B GOOD AND TIGHT AND DONT PULL ROD BACK ALL THE WAY THERE BE LESS SPRAY WHEN U OPEN PIPE BUT GOOD WORK IN BAD WEATHER YOUR HARD MAN
`I had that problem with a 200D. What happens if you don't be careful when you are trying to bleed the cylinder and get rid of the trapped air it will" diesel" and blow the seals out of the gland.
Not sure if you are aware that impact if newer model is being recalled due to trigger issues and hammer unit issues. They are replacing it with the previous model .
Can you make a video of how to remove a pin that has gotten seize/stuck in the hole of the blade of a small excavator? The pin that locks the outer 8" or so of blade
Good work fellas. Where are you located at? Does Cam own the company or what? Is there a video with these details? If not you should do one. I’d be into that! I started my own business last March and enjoy hearing about others.
SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD
Cam and Carsons dynamic is so damn funny! I finished my apprenticeship last year and still get the older guys talking smack, certainly gives you a reality check when you need it! Looking forward to more from these two!
More to come man! Where did you end up doing your apprenticeship?
@@TekamoHD That's what I like to hear! Did my apprenticeship through the site I currently work on, maintaining and fixing offshore wind turbines here in the UK. Doesn't matter what it is, if it's mechanical I'll throw a wrench at it and enjoy doing it!
@@PanozGTR95 That's cool man. You think you'll ever go independent? Send us some photos of the turbines you work on! The guys would love to see it.
The best part is that even after your a journeyman everybody in the shop still talks shit lol, honestly the best part about working with tradesmen 👌
You can’t talk at my apprentice like I do buddy. Lol that’s what a good journey does.
Love these series!! Just swiched career from doing maintenance and repairs on aircraft towing machines, flying all over the world. To now be doing maintaince and repairs on excavator and other heavy machines in my hometown in Sweden. Starting in two weeks, can't wait.
Right on man! Glad you made the switch. Are you starting for a company or are you gonna be independent running your own truck?
@@TekamoHD kind of both to be honest. The company that owns the equipment is starting their own shop so I will be their first and only mechanic. Will be doing both fieldwork and shopwork, on my own but for them😅 so independent but for a company 🙋🏼♂️
Hey guys! The extended version releases tomorrow and part 2 is being worked on right now. Thanks for the love everyone.
And if you're an HD mechanic from Texas shoot us a message media@tekamohd.com
Great video proper field mechanic work and in the dark too
Thanks Jon. Be sure to watch tomorrow's extended version. Special shout out for you.
As a fitter mechanic myself, love these videos, such a good vibe from you blokes
Cool man, how long you been doing that? Glad you like the videos!
@@TekamoHD I was a light vehicle mechanic for 6 years & now currently doing the heavier side for the last year, working on rollers, excavators, big difference than working on cars but the bigger gear is awesome
@@barratheworld2064 nice man. Heavy duty is where it's at. Whereabouts in the world are you wrenching?
You guys will be the reason I quit my Nurse Assistant Job to work the field and pack on some muscle lol
I only wear a seatbelt while in the porta-john
Lmao!
Yeah I’ve heard of heating the oil in an old pan to help seals become more malleable I need to try it next time I have to do it.
Let us know how it goes
Yo how you and your apprentice banter is exactly how me and my boss banter. My boss and me sat in a trailer yesterday eating pizza and it was just a banter. He claims he hates but I know he loved me
17:32 had me trippin. When did carson grow a beard?
Hahahaha
Howwwwww??? I guess thats a dual Cam
Keep the corny jokes and sarcasm coming
On a Doosan DX220, also no better way to relief pressure on the supply lines, BUT it would have helped if you didn't pull the rod back to full stroke... just saying🙂
Would love to work with Cam. Makes hard work fun
100% he’s awesome to work with
Watching on my lunch break! Fantastic content as always Cam and the gang! 👍👍
Yo Oz! How's the mines man?
@@TekamoHD not sure yet, I don’t start until June 7th. Lots of training to do first lol! But of course you’ll be the first people to know 😎 I’ll be sure to bring some TekamoHD stickers down with me 😉
Awesome video as usual guys. Can't wait for part 2 !!
Thanks Terry you the man. Extended version of this episode out tomorrow in the mean time
You definitely can’t beat a good Swiss roll!
Yessir!
Man i love doing cylinder reseals love it done a bunch with my dad breaking those big nuts lose with 1" breaker bars and torque multiplyer awesome brings back memorys 🤣👍👍
Fuck yeah love these vidyas with cam and Carson
Glad you like 'em Seth!
Just did a cylinder repack on a Volvo ad30
How'd it go?
It went smooth other then I snapped a bar in half trying to open up the cylinder damn she was tight
Y’all act just like me an the guy I work with I am in the middle of teaching him but he learns fast
I would love yo come out and work with you I love the hydraulic oil lol 😂
hahaha where are you currently wrenching?
try the dewalt xr 1/2" cordless, no lag baby
Hi Cam……..
PITTY U DIDENT CHANGE ROD CAP SEASLS WOULD LIKE TO SEE U OPEN BIG NUT ON END OF ROD CRIST THEY CAN B TIGHT DONT TING U VICE HOLD IT I PUT ROD BACK IN DIPPER BOSS PROP ROD UP WITH BIG TIMBER PUT HOME MADE SPANNER ON NUT PRESS DOWN WITH OTHERT DIGGER TO LOSEN SAME WHEN U PUTTING BACK THEY HAVE TO B GOOD AND TIGHT AND DONT PULL ROD BACK ALL THE WAY THERE BE LESS SPRAY WHEN U OPEN PIPE BUT GOOD WORK IN BAD WEATHER YOUR HARD MAN
`I had that problem with a 200D. What happens if you don't be careful when you are trying to bleed the cylinder and get rid of the trapped air it will" diesel" and blow the seals out of the gland.
Alright!! The Camster!!! How’s it hanging Wrenchy? Nice vid. Glad to see you not afraid to get down and dirty.
Not sure if you are aware that impact if newer model is being recalled due to trigger issues and hammer unit issues. They are replacing it with the previous model .
haha funny getting ripped into the apprentice
Can you make a video of how to remove a pin that has gotten seize/stuck in the hole of the blade of a small excavator?
The pin that locks the outer 8" or so of blade
Part 2 :)
Working on it right now!
Some companies actually are like you piss when I tell you you can 😂
Good work fellas. Where are you located at? Does Cam own the company or what? Is there a video with these details? If not you should do one. I’d be into that! I started my own business last March and enjoy hearing about others.
I'm sure we could put something together.
Could be your trigger on your impact
I always wear a seatbelt, because everyone drives like they're brain dead.
It would be a joy to work with these guys this is why men and women shouldn't work together because he wouldn't be able to talk like this
Bro needs some coin for a tooth, would u give him a 500$ bonus so he could go get a flipper made up 🤷♂️
Totally agree, MILWAUKEE IS GARBAGE 😂