Yes, Cura 4.4.1 I print PLA (mostly PLA plus) at 215 on the hot end and 60 on the bed. 0.2mm layer height. My speeds are infill=60, outer wall=30, inner wall=60, travel=80, initial layer=30. I would suggest printing a temperature tower to calibrate your own machine for your favorite PLA though. These seem to always result in good information. Like I show in my eSun review th-cam.com/video/xv7yTkYmhxQ/w-d-xo.html Welcome to the channel, Thanks for watching!
The link for the firmware upgrade doesn’t work. Do you have another one? Only one I could find was one that I had to support someone’s patreon to get access
Yes, I think the ADVi3 people have been trying to go more commercial these days. This is a fairly new development. I do not know of any alternative for the Patreon support.
Thanks for the information and thank you for being part of the community. I'm sure there are makers out there that will be glad to know it is still available.
Thanks for watching. The link issue is discussed in the comments - the creator of ADVi3+ has moved the software and has also created a better support system for it. If you search for it, you will find it.
If yoiu look on the ADVI3pp-LCD page, it links to this file for the main board: github.com/andrivet/ADVi3pp It looks like the link you have for the PCB is just a version or Marlin, not ADVi3
Do you use Cura? and if so what are your common settings for the maker select plus with pla?
Yes, Cura 4.4.1 I print PLA (mostly PLA plus) at 215 on the hot end and 60 on the bed. 0.2mm layer height. My speeds are infill=60, outer wall=30, inner wall=60, travel=80, initial layer=30.
I would suggest printing a temperature tower to calibrate your own machine for your favorite PLA though. These seem to always result in good information. Like I show in my eSun review th-cam.com/video/xv7yTkYmhxQ/w-d-xo.html
Welcome to the channel, Thanks for watching!
Grimm3D thank you! Just installed the aluminum plate and glass bed.
@@hunterbakos9946 I do not use a glass bed, but hear they are wonderful. Happy printing and thanks for being part of Grimm3D
The link for the firmware upgrade doesn’t work. Do you have another one? Only one I could find was one that I had to support someone’s patreon to get access
Yes, I think the ADVi3 people have been trying to go more commercial these days. This is a fairly new development. I do not know of any alternative for the Patreon support.
Grimm3D th3d Studio still has on there website if anyone is wondering 😄
Thanks for the information and thank you for being part of the community. I'm sure there are makers out there that will be glad to know it is still available.
Please update GitHub, GitHub not found :/
Thanks for watching. The link issue is discussed in the comments - the creator of ADVi3+ has moved the software and has also created a better support system for it. If you search for it, you will find it.
@@Grimm3D software to pcb this?marlinfw.org/meta/download/ 2.0.6??
LCD this? github.com/NathanBarguss/ADVi3pp-LCD
If yoiu look on the ADVI3pp-LCD page, it links to this file for the main board: github.com/andrivet/ADVi3pp
It looks like the link you have for the PCB is just a version or Marlin, not ADVi3