From the mag you have a brown wire (power 6 or 12v), which is the power up to the junction box/connector from there to the ignition (green wire is the shorting out wire this is connected to earth via the ignition switch when in the off position) from the ignition switch is the black wire which is power to the speedo lamp and the parking lamp connected in junction box (2nd turn on the key), 3rd turn of the key, will give power from the ignition switch (orange wire to the connector) and from the connector to the headlight switch (orange wire) from the head switch red wire (low beam) to the bulb and red wire (high beam) to the bulb. Easy lol, take your time and do a section one at a time and then test , white wire from the light switch is to the horn, (like war and piece) i normally bring up a separate earth (from the battery or mag if non battery)and connect it to the head stock on the control rod nuts fasteners to give a good earth, CLEAR AS MUD!! Well done Rob hope this helps
Hi, your videos are so helpful that an entusiast beginner or learner can do it himself. In India it is very hard to find a experinced person who can handle and spare time for the vintage beauties. Great work. Greetings.
Buongiorno rob from Italy 🇮🇹,,great video as always, will that simple wiring loom work on 6volt original system and have you a link to get the right one 😀, keep up the good work, grazie mille.
If you connect a battery to the brown wire You won’t need to start scooter When you want to check that your lights etc all work You could connect the battery To the brown at the rear Therefore not having to open headset up
Good morning friend, I'm subscribed to your channel and I was looking at the connection of the scooter's wires. Could you provide the electrical diagram for the series 2 scooter? I'm trying to find it on the internet.
Good stuff, Just bought a simplified Wiring Loom myself, so ill use these two Videos as reference. I'm sure it'll be Rob's fault if it doesn't work ! Ha !
From the mag you have a brown wire (power 6 or 12v), which is the power up to the junction box/connector from there to the ignition (green wire is the shorting out wire this is connected to earth via the ignition switch when in the off position)
from the ignition switch is the black wire which is power to the speedo lamp and the parking lamp connected in junction box (2nd turn on the key),
3rd turn of the key, will give power from the ignition switch (orange wire to the connector) and from the connector to the headlight switch (orange wire) from the head switch red wire (low beam) to the bulb and red wire (high beam) to the bulb.
Easy lol, take your time and do a section one at a time and then test , white wire from the light switch is to the horn, (like war and piece)
i normally bring up a separate earth (from the battery or mag if non battery)and connect it to the head stock on the control rod nuts fasteners to give a good earth, CLEAR AS MUD!! Well done Rob hope this helps
Good info. I'll pin this.
Correction for above red and blue wires from the light switch, Red low beam blue high beam
Hi, your videos are so helpful that an entusiast beginner or learner can do it himself.
In India it is very hard to find a experinced person who can handle and spare time for the vintage beauties.
Great work. Greetings.
Fabulous information Rob, I am just about to fit my New H4 conversion and sort out my wiring 🫣😳
Buongiorno rob from Italy 🇮🇹,,great video as always, will that simple wiring loom work on 6volt original system and have you a link to get the right one 😀, keep up the good work, grazie mille.
Thank you. Lots of working loom info in stickies book, and that is also in Italian 😎
Really helpful, nice to see you back again . Just wired mine , will do the white earth mod brilliant now 😀
With 2 videos a month last year, I haven't really gone anywhere 😀
@@kickbackgarage sorry meant to say back in new year I’d overlooked your first video 😀
If you connect a battery to the brown wire
You won’t need to start scooter
When you want to check that your lights etc all work
You could connect the battery
To the brown at the rear
Therefore not having to open headset up
Hi Rob, What is the 3rd wire on the light switch (red)? Power?
Thanks
Brown is power, red is to main or dip if I remember correctly..
Good morning friend, I'm subscribed to your channel and I was looking at the connection of the scooter's wires. Could you provide the electrical diagram for the series 2 scooter? I'm trying to find it on the internet.
There are loads on the Internet. Try scooter center www.scooter-center.com/en/lambretta-innocenti-li-125-series-2-veh814
@@kickbackgarage thank you very much colleague will be of great help.
Good stuff, Just bought a simplified Wiring Loom myself, so ill use these two Videos as reference. I'm sure it'll be Rob's fault if it doesn't work ! Ha !
I can take it!
Brilliant video as usual Rob & well explained, looking forward to the next one mate. Has that "Malt" been in your cup again 😉😂😂
I'm empty, this is the real me
I'm trying to find the CDI series 2 wiring diagram on the internet and I don't think you could help me?
Have you got a light boy…..😂
No any more 😀