I Finally Bought a Yamaha YFZ450 Quad! INSANELY POWERFUL
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- I finally end up buying a Yamaha YFZ450. I break it the first ride. #Yamaha, #YFZ450, #Quad,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.c...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
What do you guys think I should do with this quad?
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for the support!
If you know a good Tig welder they may be able to fix that case but would require splitting the motor but if your going that far may Aswel replace the whole case. I have had a few mates that have had them and lack of maintenance and many hours they can throw a rod and when they do they go straight through the crank case. If your going that far with pulling it apart I'd replace the crank and throw a high comp piston in it. But great score, over here in Australia there fetching $6000+ even in rough condition
Sell it unless you race
@@toddphillips824is that even a race quad ?
@@Guadzilla459 yes it is ! I have one also super fast !!
@@toddphillips824 why sell it . They are awesome quads
I had a 06 and my rod bearings went down. They were known for bottom end failure. Yamaha updated the oil pump in the bottom end in 2007 and up on the YFZ. You can get a oil pump conversion kit cheap that goes in the right side crank case. I would really recommend it.
Otherwise the best 450cc race/sport quad ever conceived!
I gotta give this young man a thumbs up on every one of his videos simply because he is out there doing it, learning along the way and making a little $$ too. But I must say one mans mint condition is another mans clapped out pile. Very few bikes or atvs on this channel have truly been mint condition and ran as such. No Hate or trolling just a little constructive criticism from one atv/bike lover mechanic to another.
True ...but he gets a ton of em!
That's honestly why I watch his channel tho... He buys and fixes stuff that most people would have little interest in bothering with. Then he shows you himself fixing it on a shoestring budget and getting some decent work and results in the process. Anything can be fixed, and I love seeing someone out there dedicated to do it with bikes and atvs.
@@twowheelterror2925 Yes, I really enjoy learning how to rebuild those simple motors, it's great. He's really good at it too, thanks 2vintage!
That's awesome. I own one myself. (2004) It really packs a punch. Has a lot of power!
Mr. Clean magic eraser will be your best friend on that white quad. It will look brand new once you clean it up. I’ve owned a white 2004 YFZ 450 for the last 15 years and it looks brand new still.
the only thing i dont like is no air box dont care what anyone says rather have stock airbox on it with a good air fiter n holes in the lid
That air filter definitely lets some silt in. Doesn’t even look oiled to me
Please don't ever put holes I'm an airboc dude that owned one of my bikes before me did it is so stupid and does nothing
@@linkinpiatak6669 dude seriously takes a water protector and makes it useless
Welcome to the yfz family! Best race quad out there! We are making our first trip out to black river falls and dyracuse atv park in wisc here real soon you should come bro!
Yamaha makes the best sport ATVs by far!
Went there when I was younger with my dad, uncle and cousins, it’s pretty awesome there haha
I absolutely hate when people don’t buy case savers. It’s literally one of the cheapest mods you can do. Keep up the great work man can’t wait to see this yfz all fixed up 🤘🏻
The YFZ had one factory too lol
i made a mistake and didn’t buy a case saver for my yfz and now i had to replace it so now what ever boke ima buy i buy a case saver
Ya agree but sometimes it hard to find case savers for some quads
@@jordandarcy3329 warrior 350 or raptor 350 is almost impossible
DRW performance guys. Westin has ever case saver for all sport quads. They are all in the 20 dollar range. A must have imo.
The reason it smokes is from that k&n air filter..don’t ever put a k&n filter on anything unless u keep it oiled and then they still let fine dirt in the engine trust me I’ve seen it many times.
Yes they do. When you can see light through holes even sand will pass. They should be called bug catchers. Bout all they do.
They suck!!!
The K&N let's more dirt in and wears rings out faster. Not worth it for the minor increase in power.
Dam dawg that's a bad ass quad are you doing this as a full time job you bin putting out a lot of good content
Hopefully someday you can ride other places besides roads,fields and lawns . Go to track or some trails have more fun 🏁
Yea a tracks or orv park of some kind
@@joe212 ya being a mx racer for 25 years seeing him ride up and down road drives me nuts lol good kid tho he's learning
Idk guess it's a matter of perspective but im kind of jealous of all the land I see him riding around on. I live near the city where they ride quads and dirtbikes in packs of 20-30 in a congested area on the road. Cops can't chase them if they run either
@@thetwostrokerebuilder im the same I've been riding 25 or 30 years racing atv mx also
I think he should purchase some land just for videos would be cool like 10-20 acres
I would do away with that so called racing intake and go for the stock air box cause that junk will suck in water and dust and wear out the top end prematurely
yup... taht is just dumb doing that... just put a cone filter in the oem airbox...
I’d do that or get if they make one for carb model an fuel customs intake with box
If you get real muddy when riding, put an air box on there. I’ve always been happy with K&N or Uni. Stock is, well stock, but will get the job done. Yamaha is on top of their game. Ready for Honda to join back in with an upgraded EFI 450R… get some competition going again! Keep it up, boss!
@@leejennings173you’ll be waitin awhile on the hondas. how are the kawasakis? i’ve always liked their dirt bikes but in lookin at trying out a four wheeler for the first time. but i’ve never heard a lot about kfxs almost like they didn’t make a lot of them.
I had one. By far the best quad I ever had. It’s a keeper at that price for sure.
I own a 2008 yfz450, and you gotta ride it super hard and get it super hot, like the exhaust glowing. Before the fan will ever turn on.
Yeah the exhaust will be super red by head
Not smoky enough joe! Probably valves need adjusted or a valve seal. Doesnt seem like a big issue to me. Sounds healthy
Almost enough to smoke out the mosquitoes
I would replace the timing chain while in there and possibly guides.
nah
My daddy always used to say if it aint broke don't fix lol.
@@jwilliams9611 your dad ever own a 250f?
@@johnnyjohnson2942 Unfortunately no it was just a saying though. But the video is about YFZ450R not A 250F Just saying.
@@jwilliams9611 the chain is like $30, or risque a complete engine? I'll go with the çhàine every time I'm in there.
Make sure your idle is good, it's had a pipe upgrade, make sure it's jetted right, these 450s are monsters if done correctly, this one seems like a gem, no smoke, like I said check the jets? Good buy brother!
2008 Kawasaki kfx-ksf450r is a unreal machine I’d say best 450 quad out….
I agree, KFX 450r is the best 450 out there,
The 400ex was always a good tail goat. The 450s are where its at if you want to race
2100 is a damn good deal. Now theres only one more quad you have to try LTR
The tires on the stock wheels were also a set of holeshots lol
Definitely needs rings smoking pretty good actually
Just got back into quads after taking about 15 years off. Going to pick up a yfz450 soon. Awesome pick up ! My brother had one back around 07 and I remember it being crazy fast !!
Looking forward to the Tecate 3 wheeler video.
You will never regret only that four-wheeler. I've never had one but my good friend had one for a while and he regrets getting rid of it. I have gone to his house to work on it a few times as far as the carburetor goes. The thing is absolutely ridiculous. He's had a lot of fool willers and that one by far was the fastest. It would walk the dog mess out of every other Fuller and dirt bike he had. Has no hesitation on take. The thing is an absolute beast. An absolute wheelie machine.
White wheels all round 👌
The chain snapped and he did not have a good saver and now you should get that fixed ASAP.
Dream quad! Always wanted to get one but other things come in the way. Absolute beast!
Need to do the oil mod on that year I believe … it’ll increase value considerably
I think 06 and up has it done maybe not tho
04-07 needs it done
No it’s 04 to 06 that need it done. 07 and up have it done from factory.
What’s that oil mod that you need to do?
@@salvadorcarrillo711 oil pump conversion kit is what they’re talking about I think
The quad is mint good solid quad just bit work here n there be perfect keep up the good work been follwing for ages now always good content
Take the lowering kit off the front shocks
Crankcases are machined at the factory as a pair so should be replaced as a pair. If you strip the engine a good welder could probably fix that damage. With spark issues I'd start at the plug and work back. The cdi should be the last port of call. Could be the coil breaking down once hot. Do the cheap stuff first.
Yah I was just looking on Rockymountainatvmc at there oem diagrams and parts. Looks to be a matched pair, can't buy left or right like on say the 400ex. Showing plenty in stock for $381.12 on the yfz crankcase assembly. They got the oem stator cover in stock as well. Idk if I was keeping it I'd just patch it and send it. If it was a re-builder then yah fresh OEM only way to roll
Please please PLEASEEE Try a raptor 700r If you like torque it has it. You like speed it has it. You like mudding it can do it. You like sliding thru the track it can do it. Its A monster man. One day try it out.
Lol, he ain’t lyin… I’ve got a YFZ450r but have ridden several raptors, both 660s and 700s, and so long as you don’t mind the taller stance, you’ll love this torque monster
Isn't the yfz 450R supposed to be better than the raptor ?
@@brandong7201 450r more of a race quad and 700 is more for trails and dunes
450s all day.
the perfect person for it to go to, atleast he can see where it goes and watch it on youtube
Man $2100 for something that clean is nuts. Quads like that near me are around 3500 all day even with the issue. Market is nuts right now
A quad like that in quebec is 5000$ easy
When u rev it in neutral the tail light would give a pulse flash. On for a split second. Almost every time u revved it. Something isn't right somewhere and I'm thinking a ground in the harness. Not letting the taillight work right and now suddenly no spark. Look into that k man. And also test spark with a brand new plug. Not one thats been used at all. I would buy both case halves b.c. they are machined and matched together. I wouldn't risk fitment or clearance issues man. Go to bolt them together unmatched cases and one could crack. Then u gotta buy the other one anyways and re do all your work. Just buy both bro!!! I want one now after seeing this lol
My CRF450x done this with tail light it flashed when u rev now it doesn't work at all and sometimes it struggles to start its cranking but doesn't wanna fire up.
Whats that harness thing you mentioned?
Thanks if you can reply
@@DlZZEE i go through all my harnesses wire by wire, undo everybody's electrical tape. I mean like remove harness from the bike and lay it on your bench and unravel everything bro, fix any breaks, replace janky looking ground leads. There should be A ground to the frame somewhere make sure thats primo. And when u reinstall it dielectric grease every connector and frame ground. I even dielectric grease the coil where it bolts to the frame so it doesn't rust and short out.
Could be wires melted together too and not even know it. Thats why I take the time and remove the whole harness from the machine man. So worth the time. Takes a good few hours to do it right.
@@dennisbrooks186 im no good with electrical haven't got the patience but thanks for the info I will take it to mechanic
I seen that
Probably the nicest quad you've ever bought. I want one of these brand new lol
Yeaaaa ready for part two
It’s funny How people call that A racing Intake
Almost at 200k !!
You should get a KFX 700!! They are super torquey and are beasts! We have one and it’s a lot of fun. Kept up pretty good with my old banshee. Haven’t raced it against my Tecate 4 yet. That’ll be interesting. Also great purchase! And great price! You always seem to find the best deals!
You should make some TH-cam videos with your quads mr.state farm
@@alfredo42o Good idea! I’ll definitely have to sometime soon!
Bro u should try a kfx 450 insane amount of power
Haven’t had a chance with that one I know the kfx450r is awesome
I have a kfx 700 I would sell for cheap
When u fix the oil problem get a case saver cause the chain came off and went through it
Yamaha YFZ450Rs are incredible quads! Prob best all around sport /race quad in 450cc range ever.
I bought a 2018 SE a few months back. I put a fuel customs intake, Vortex ECU and Dasa full pipe on it. Quad is fast as heck. It rips. I love the way the quad handles. I can push it hard and it handles pretty much anything even with just stock suspension. I will probably put aftermarket a arms and shocks once I do a full rebuild. Stock is fine for aggressive trail riding though.
The older carbed models like the one in this video are substantially quicker than the fuel injected ones....the fuel injected ones handle way better tho
@@KrustyQuad I always thought the same thing
Wow that was cheap your right on the $4,000 price range that's what they go for or $5,000 where I'm from, you got a nice quad, I like yfz450's awesome video man & great fine can't wait to see what you get next
Good looking quad I like those yamahas
Being able to work on stuff is awesome. You can buy stuff that doesn’t run pretty cheap,fix it up and then you have a well running machine for a fraction of the price of a new one!
Nice Quad I finally had a chance to ride my 🦖 cbr600 swapped yfz450 and I absolutely love the yfz chassis especially with 100+ HP lol
My buddy had a like new bone stock perfect KAWI KFX 450R quad a few years ago for 2500. I beat myself up everyday for not buying it. These 450 quads hold their value.
Your parents must love you messing there yard up lol
I love this looking amazing and very fast I used to have yz450f miss it wish never sold it, good luck hope you get it fix and running good bro 😎
They are the most stable quad and can be hard to wheelie because of it! They really only like being in the R's
Superb can’t wait for the next episode 👍🙏🍀🏍
You should compare it to a TRX450r!
Has a lowering kit on the front. A good case savor will prevent that. The oem case savor will damage a case like that ever time
i currently have a big bore kit on mine and it rips 💪
Since it's a 2006 need to check for the oil squirter mod, if not you can damage the bottom end
i’m getting a brand new one sometime within the next month
I have a 04 love it!!!
So just imagine that in a motorcycle. Half the weight! More power!!
yeah insane!
It’s called a yz450
There already made one yz450f
@@763GanderGuys fax
Yeah I'll ring that thing out and hit a triple all day long!
Lots of torque in that 450!!
FINALLY THANKS JOE!!!!
6:27 bro that’s definitely a rat in background😂😂
Do yourself a favor and adjust the front shock springs for maximum softness(move the spring retainers up)
Man you get killer deals...I wish I had your skills
Finally you bought the beast man . You might as well keep that one bro. You can continue to build it yearly and race it
The only riding he does is in his back yard and the road out the front house
Those after market headlights make the quad look like a kfx450
Try to get a scrambler 400 keep the content going
This is by far one of the nicest wheer's you have gotten and a really great price. Looks like spectre air filter not K&N. Take quad to a local welder that welds aluminum they could weld that side case thats repairable. Check grounds first and check stator for oil or rust, both easier to check
Nothing beats a 450 whistling
Insanely fast an literally just went in a circle
You need the Ltr 450 that would be a awesome video
Had the same year back in 2017 bought it blown up completely grenade it rebuilt the whole engine put new tires on it and it was really really fast good four wheeler they say 07 and under didn’t have the oil squirter in the top in and they always bloom up when getting really hot
i like those graphics were those from i tried looking up duncan but nothing popped up i got a 05 yfz really clean i want those graphics 😂
Make sure the oil mod was done you’ll starve the crank from oil it was a factory defect this issue was from 04-07
Never had that happen on the 04 we had when I was growing up. Thing was always on the limiter too. Only had to replace the water pump bearing
@@insanetaco98 you must of gotten lucky cause I’ve seen a lot of first gen yfz lock up due to not having oil mod
@@mitchelllopez8048 just change the oil every 5 hours and use good quality oil.
@@mitchelllopez8048 my dad raced the thing a lot and would keep it pinned always and the only thing he blew was the water pump bearing
Had a raptor 660 for a while. I thought it was a beast until I had the pleasure of riding one of these monsters..
I would check the Magneto I have a YFZ and it always goes
Pretty sure you can just weld that. No need to replace the whole thing.
Joe I recommend putting loc tight on the screw for the petcock knob it vibrates out .
i agree putting engine cases back together with rtv is not minty repairs
Try finding an LTR 450 you’d love that
Exactly!! One of the best quads ever
Hey joe, buy some alumaloy rods and fix the case yourself. You use a propane torch to melt the rods. Works great
I’m doing a top end rebuild on my yz85 I bought it as a project bike I love working on them
If you keep it put an 8 oz stealthy flywheel weight on it. Won't stall as bad, will lugg longer muddy, slippery conditions. No affiliation, I believe they are out of Oregon if im correct.
Congratulations nasty quad I just got one yfz450r 2017 pretty cool
Heavy front end ? B.S. mines used to lift right up in 2nd gear on the beach!
Do the tps mod also … just make a connector for each end and you’ll get rid of any low end bog
TPS mod?
Throttle position sensor
You sure that doesn't only apply to the fuel injected ones?
It may be called tors delete … you may be right idk
I got my 06 yfz back I'm 2015 for 2100. Nothing was wrong with it. Ran like a champ ready to go to the races and still does today. Only think I replaced was stupid clutch cables that always went out fast for me. Then the oil o ring up at the clutch lever pivot arm. Great dang 4 wheelers man especially mine only being 9 years old for 2100
Hey! Could you show how to take off the plastics of the yfz 450 pleaseeee!!!!! Nice, now i can learn somethings from you, as i have a yfz 450 2008!!!! Great video!
I have no idea why anyone would take off case savers......Those machines like top end the cam kicks in right near the highest RPM. almost like a 2 stroke. Riding one of those the first time I hit the cam it wheelied when I hit it then I just kept it in that range. OMG fun as hell.
I bought one of these a month or so ago. I would recommend replacing the case half - find a local person who parts them out, I have been super lucky in my area and there is a few atv wrecker options and it ends up being ridiculously cheap in comparison to new parts.
On my machine I’ve had to replace: steering stem, bushing and bearing/seals, 1 front wheel bearing, 1 seized front caliper pin, 1 stripped out rear caliper pin, rear carrier bearings, shift lever, foot brake pedal, clutch lever, front brake lever. It’s been a good project so far, mine has been well loved and obviously raced at one point in its life - but they are a really nice machine.
Also check to see if the oil mod/oil upgrade has been done the early models (06 and prior) did NOT have an oil jet to squirt oil up to the piston pin area and it can potentially cause catastrophic engine failure. You have to remove the clutch cover on the RS of the engine to see if it Has been done.
After watching more of your video, I would say you need to adjust the valves (reason for no start) and jet the carb
Also put a stock air box back into it to keep crap away from the filter! Keep the box lid off but the box itself is a very good idea to have.
Also if you do the oil squirter/oil mod you should make a video of it! Subscribed
@@Dansyoung also running an outerwears sock on the filter will keep shit out
Slap a really good CDI and carb on it bump the timing a bit and that thing will really rip lol Definitely a awesome quad and we'll worth going through 🔥👍✌️
Me patiently waiting for him to buy a ltr 450🥱😂
Ayyyy owennnn
You either need to have that case welded by someone that welds aluminum or buy a case half
dont jb weld it... xD
Finally man now you know the real feel of power!
Make sure you have the oil mod done to it.
2v timeeee. Lucky! Sick quad
Nice quad man. Try to get your hands on a fuel injected one. You’ll be so surprised at the difference
I've road a couple fuel injected bikes It's definitely a world of difference The response is superb I have a 50cc scooter I'm putting a big bore kit in right now I wonder if I could convert it to injectors lol That would be cool and would probably get crazy gas milage ✌️
Sick bike Joe
You might want to put a outerwear over that filter to minimize the water intake it will also keep your filter clean longer. Much easier to clean the air filter cover. The red light is to tell you when the water temp is to hot it will come on when you turn the key on or start it for a few seconds to let you know its working.