Holler at me Joe, still have a couple tools I'd like to send ya. Links in my about section. No strings attached, just glad to see a young fellow grinding hard! Nothing super special but a couple extras I think you'll use a ton.
Really appreciate the videos. Using some of the different repairs you did on different atvs was able to diagnose and repair a 2005 can am outlander 400 myself Super helpful man
The hole in the header probably came from running a hot engine through creek beds. Just a guess. I had a hole in my exhaust manifold from snow and wet roads. Great episode! Thanks, Joe.
You can tell thats a legit first start made Joe jump haha would have me too fired up like it was PRIMED! Another good job! This man has more quad/dirtbike content than anyone 100%
Ikr lots of TH-camrs will say here we go with the first start and in truth they all really had it running good and then run it out of gas and then give the viewers a "first start". Joe is very legit with his content.
Love the videos Joe. Will share my concerns for the last time.. The chain coming off the other week was a Wake up Call. Please park ya truck n trailer somewhere else.. You have a massive amount of land YET choose to park right next to your Speed Test Strip!!.it's. CrAzy MOVE THEM AWAY BEFORE YA SMASH INTO THEM FFS! 😫
#1 thing check oil, then water to see if water went into oil. Expecially if no coolant in radiator. Spark plug not pluging into cap was probably the reason u got it so cheap, beside's the carburetor stuff
I'm new to this channel, but have tons of experience in this department as I used to work in a bike shop for ten-plus years. This appears to be quite a lucrative job. The profits that could be made on virtually every machine you have is likely pretty decent. One thing is for sure, and that's you're definitely earning your money because this isn't an easy gig.
Hey Joe. Really enjoy your amazing videos and the work you do. On some of your videos you get them finished up all but 2 or 3 other remaining small items/issues that you mention at the end of the videos. Like some remaining paint the needs to be stripped on this bike or your going to order some new side panels for this atv. Could you do a quick recap at the end (or beginning) of some your videos and show the completed product and maybe even what you did with it after completed? You know, something like sold this one or traded that one. Thanks and keep up the great content. Have a great Christmas season.
Since those tires are worn, I can imagine the roosters that you would leave in that field. Another great job in diagnosing issues that arise on each machine you come across.
Keep up the good work Joe personally i love the 450's. Addictive. The constant battle however is the never-ending jetting and tuning. Maybe a video on that.
Homeboy, who sold it's probably mad as hell Watching this video wishing. He knew how to go over his quad like joe lol but hell yea ive seen you take some hits before so its great to see you get an easy fix every now and then
ENJOY THE CONTENT, NEAR THE END OF THE VID WHEN DOING THE SUMMARY IT LOOKED AS THO THE SMALL INSPECTION COVER FOR LINING UP THE TIMING MARK LOOKED LIKE IT WAS MISSING, IF YOU KNOW ABOUT IT NO WORRIES. KEEP WRENCHING JOE, NICE ONE
I have that header I can send you. I have the same yfz, I got the exact same deal and the only issue was the selenoid wires were on backwards and it had a junk silencer. I put a whole new hmf exhaust but the header that was on it was mint. you can have it.
In the cold weather keep that cooling fan off unless you’re going slow in the trails ! The fan will keep the outer cylinder cold while the inside gets hot next your cylinder is cracked ! Don’t want that ! Keep em coming bud 👍😎💪🏻
Shhhh! Lol jk good tip however ive learned Soda cans work a little better just cuzthey tend to have a tad more 'flex' and can be 'crushed' down a lil better!
Ha!😂 I used to do that on my first car! Wrap it with a soup can and a couple exhaust clamps! Would last a month or two, but always failed at the worst time's!! 👍
Hey brother how do you disassemble a big wheel yamaha 80 rear hub do i need a hub puller 😮 i need the hub on a different rim 😢 the hub is stuck ive removed the nuts from the three bolts but it wont budge im so close but yet so far away ugh 😮
When you first jumped the solenoid, you jumped 3 feet in the air. Lol. Nice temporary fix on the header. I would have used duct tape. LOL, Merry Christmas Joe.. Z 😂
Good catch on the missing fuel screw. Spark plug not Good when black, it should be light tan or mocha may be too rich. Blade fuses are designed to be checked when plugged in, the 2 little bare spots are for your voltage tester. You can tell if you have power going in and power going out
Dude who originally owned this was definitely a wheelie king, hence the lights on the A-arms to see in front when riding wheelies at night. Probably all road riding. That's why tires are so worn.
Hey joe. I was wondering if you could give some advice? I found a 1984 kawasaki kxt250 tecate 3 wheeler. Its pretty clean 84’ Kawasaki KXT 250 Tecate - original OEM plastics and tank. New swing arms bearings. New carb from Off-Road Innovations. New tires all the way around. New seat cover over OEM foam and pan. Re-Plated cylinder with new Wiesco piston, rings, and wrist pin. New spark plug and shift shaft. New UNI air filter and fresh fluids. New pro stock Boyesen reeds and Pro circuit 304 silencer also new exhaust gaskets. New petcock, fuel line and vent lines. New clutch friction plates, new gas tank bolt, and new gas cap. New head, cylinder, clutch cover gaskets. New rear master cylinder, caliper, and pads. Comes with the following parts: original OEM Mikuni carb with throttle cable, original OEM master cylinder, Caliber, and gas cap
What do you end up doing with the tins of quads and bike you buy and fix? You end up keeping them or just fixing and putting back in Facebook? Thanks!!! Great content.
If your measuring across the solenoid as in one lead on one side and other on the other you would read 12v until the slenoid engaged then you should read MV or close to 0 when it closes.
That header pipe fix was probably the worst thing I have ever seen You do on this channel!! 😂 Automotive heat shield wrap would have been a more appropriate fix in my opinion! 😮😮 I can smell the burnt rubber from here in Michigan!
So if you had a aluminum soda can I'd go for Mt. Dew may work a bit tighter than sheet metal. Keep up with the vids n yes I heard u say u were gonna try to get a new header pipe buddy
You really need to make that corner where u park at one big corner berm so you can git it around that corner n keep on gittin it!!!lol! Nice quick fix n it does sound like it's got some snap to it!
Real wreck u got but a great price i would soak the plastics and clean them then sand them and buffer them smooth then coat it in wax polish last it will make the plastics look brand new takes a bit but u can do it very good purchase to flip quick.
Holler at me Joe, still have a couple tools I'd like to send ya. Links in my about section. No strings attached, just glad to see a young fellow grinding hard! Nothing super special but a couple extras I think you'll use a ton.
Bro you're a savage for this praise this man for letting men be men ^^
Love the community in the comments section lol there great
@@shmitt8307*they’re
@PSBEadventure what a great gesture 👍 @2vintage
His parents are loaded. It’s how he got the house and property. I’m sure he don’t need any tools lol.
Its impressive how quickly and methodically you diagnose issues. Its always a joy to watch. Keep up the good work. Merry Christmas
LMAO !!!!!!!! yeah ok...
You've came a long way since you were fixing 80cc when chuck was young, be proud of yourself you've became one of the best now Joe🎉
A new 2vintage video, now that's how to start a Friday. Merry Christmas to you and your family!
Hey Joe at 42:14 it looks like you lost the cap/plug that goes in the side cover where you check the TDC mark.
Joe need to build a big ass pole barn out there on your land.
Really appreciate the videos. Using some of the different repairs you did on different atvs was able to diagnose and repair a 2005 can am outlander 400 myself Super helpful man
The hole in the header probably came from running a hot engine through creek beds. Just a guess. I had a hole in my exhaust manifold from snow and wet roads. Great episode! Thanks, Joe.
You can tell thats a legit first start made Joe jump haha would have me too fired up like it was PRIMED! Another good job! This man has more quad/dirtbike content than anyone 100%
Ikr lots of TH-camrs will say here we go with the first start and in truth they all really had it running good and then run it out of gas and then give the viewers a "first start". Joe is very legit with his content.
Already*
100% buddy! Well said!@@danielparsons3995
Man..... once you fixed, cleaned and dialed the carb that thing starts like RIGHT NOW!!! Nice job Joe!
Love the videos Joe.
Will share my concerns for the last time..
The chain coming off the other week was a Wake up Call.
Please park ya truck n trailer somewhere else..
You have a massive amount of land YET choose to park right next to your Speed Test Strip!!.it's. CrAzy
MOVE THEM AWAY
BEFORE YA SMASH INTO THEM FFS! 😫
Keep them coming......Really enjoy all your content :)🙃
How many turns out did you end up with on the fuel screw?
@@markbrynteson5141 Why don’t you ask Joe instead of the guy you’re replying to?
@@jumpinjojo ooops
Again amazed at your video output, your knowledge, and your patience. Another learning experience giving hope to all us cheapskate garage mechanics
#1 thing check oil, then water to see if water went into oil. Expecially if no coolant in radiator. Spark plug not pluging into cap was probably the reason u got it so cheap, beside's the carburetor stuff
Nice one. That engine sounds healthy, and it looks it's a good quad overall, just misoverlooked maintenance wise. Keep it up 👍!
Great watching you fixing up all types of bikes & equipment, all best from uk
I'm new to this channel, but have tons of experience in this department as I used to work in a bike shop for ten-plus years. This appears to be quite a lucrative job. The profits that could be made on virtually every machine you have is likely pretty decent. One thing is for sure, and that's you're definitely earning your money because this isn't an easy gig.
Hey Joe. Really enjoy your amazing videos and the work you do. On some of your videos you get them finished up all but 2 or 3 other remaining small items/issues that you mention at the end of the videos. Like some remaining paint the needs to be stripped on this bike or your going to order some new side panels for this atv. Could you do a quick recap at the end (or beginning) of some your videos and show the completed product and maybe even what you did with it after completed? You know, something like sold this one or traded that one. Thanks and keep up the great content. Have a great Christmas season.
Fixed in 20 mins let me tell you how in 45 mins 😂 love this guy fr best atv channel around
Worst atv channel are you serious
Since those tires are worn, I can imagine the roosters that you would leave in that field. Another great job in diagnosing issues that arise on each machine you come across.
You got her running ,must have been fun riding on those slicks on ice😅 your a madman😅 39:45
Bravo, a little tinkering, and you got it humming along. Keep up the hard work
Going after fuses with a pair of channel locks had me 😂😂
I was laughing so hard at those "rooster gaff" hose clamps just screaming to be fed a naked calf.
Great save
I like the newer bikes being worked on than older in my opinion
Keep up the good work Joe personally i love the 450's. Addictive. The constant battle however is the never-ending jetting and tuning. Maybe a video on that.
Lol
Good lad, quality vlog, once again, this quad, will be awesome, when it gets new boots, and plastics....you did good 👍....respect 👍
Fought their was a mark on my screen and then realised it was on your lens 😂
It’s sure is nice to see you get an easy fix, win a few and loos a few.
Never seen anybody manhandle a fuse out with channel locks while a continuity tester touches their hand. Impressive.
Reminds me of my dentist 😂
Homeboy, who sold it's probably mad as hell Watching this video wishing. He knew how to go over his quad like joe lol but hell yea ive seen you take some hits before so its great to see you get an easy fix every now and then
ENJOY THE CONTENT, NEAR THE END OF THE VID WHEN DOING THE SUMMARY IT LOOKED AS THO THE SMALL INSPECTION COVER FOR LINING UP THE TIMING MARK LOOKED LIKE IT WAS MISSING, IF YOU KNOW ABOUT IT NO WORRIES. KEEP WRENCHING JOE, NICE ONE
WHY ARE WE YELLING!?
I have that header I can send you. I have the same yfz, I got the exact same deal and the only issue was the selenoid wires were on backwards and it had a junk silencer. I put a whole new hmf exhaust but the header that was on it was mint. you can have it.
In the cold weather keep that cooling fan off unless you’re going slow in the trails ! The fan will keep the outer cylinder cold while the inside gets hot next your cylinder is cracked ! Don’t want that ! Keep em coming bud 👍😎💪🏻
❤ the videos and Vinnie! You are inspirational and modest. Thx
Great find , you should turn a good profit on this one , great video and keep em coming
Right hand side, front motor mount "frame" bolt arrears to be defunct. @42:13 the flywheel inspection screw has left the building.
A couple pipe clamps and a pop or beer can works great lmao
My buddy bought this quad from you he still has it too
love the sound of the bike keep on doing what you do cant get enough of the videos. wish i could get a bike like that but moneys the issue.
Is there some kinda frame support the last owner added? Under the seat
Can you please take a bit longer to fix your projects, I need these videos to get me to my lunch hour.
Little trick for busted exhaust pipes. Get an empty Soup can. Cut it down the sides and clamp it onto the exhaust.
I use a soda can cut the top and bottom and split down one side and use 2 hose clamps
Shhhh! Lol jk good tip however ive learned Soda cans work a little better just cuzthey tend to have a tad more 'flex' and can be 'crushed' down a lil better!
I got a trick too get a new one
@@Johnbruzzi4234 That won’t work.
Ha!😂 I used to do that on my first car! Wrap it with a soup can and a couple exhaust clamps! Would last a month or two, but always failed at the worst time's!! 👍
Hey brother how do you disassemble a big wheel yamaha 80 rear hub do i need a hub puller 😮 i need the hub on a different rim 😢 the hub is stuck ive removed the nuts from the three bolts but it wont budge im so close but yet so far away ugh 😮
When you first jumped the solenoid, you jumped 3 feet in the air. Lol. Nice temporary fix on the header. I would have used duct tape. LOL, Merry Christmas Joe.. Z 😂
Good catch on the missing fuel screw. Spark plug not Good when black, it should be light tan or mocha may be too rich. Blade fuses are designed to be checked when plugged in, the 2 little bare spots are for your voltage tester. You can tell if you have power going in and power going out
Is one of the timing plugs the small one missing
Where do you resale your stuff at ? I would like to take a look at your inventory and prices
Not sure if you took it out off camera, but you shouldn't ride with a screwdriver in your pocket, man. A great way to impale yourself.
Good work man! Makes me want to go and buy a cheap YFZ450 ! They are amazing machines honestly! 👌🏻
Did u notice the timing inspection bolt is missing im surprised oil isn't everywhere
That’s stator side, not much oil in there if any really.
@@Anticidal25901 wot an idiot
Looks like someone drove a tank on your land. 😉
Shows how to fix quad and then shows how to do 1000+ donuts on a field. Love you joe❤
Curious if you ever bring a compression tester when you go to look at these machines ?
Do you wanna look like an idiot ? It’s not a boat
Dude who originally owned this was definitely a wheelie king, hence the lights on the A-arms to see in front when riding wheelies at night. Probably all road riding. That's why tires are so worn.
Or maybe cuz the headlights aren't mounted an dangling 🤦
Very good diagnostics. Great stuff.
When I was little my brother use a Budweiser can to fix his exhaust on his Nova
Aw man not the black spec on the lens hahah. Awesome build as always
I wish you made videos of profit or loss on machines you fix and flip
Nearly wet myself when he sparked the solenoid to start it and he did a dance 😂
Awesome video. But no appearance by Vin. My dog, Sophie, has a crush on Vin.
Im curious what you do with all the finished pieces? Do you resell them? If so where?
Probably on marketplace or apps like that.
What was with the metal bolted to the frame by the left hand side of the air box? It the frame broke?
that was a really fast turn around time sir! if you want to sell it let me know, looking for something a bit faster than a 325 trailboss
Can you recommend a site to check vin status, buying bikes without titles?
Hey joe. I was wondering if you could give some advice? I found a 1984 kawasaki kxt250 tecate 3 wheeler. Its pretty clean
84’ Kawasaki KXT 250 Tecate - original OEM plastics and tank. New swing arms bearings. New carb from Off-Road Innovations. New tires all the way around. New seat cover over OEM foam and pan. Re-Plated cylinder with new Wiesco piston, rings, and wrist pin. New spark plug and shift shaft. New UNI air filter and fresh fluids. New pro stock Boyesen reeds and Pro circuit 304 silencer also new exhaust gaskets. New petcock, fuel line and vent lines. New clutch friction plates, new gas tank bolt, and new gas cap. New head, cylinder, clutch cover gaskets. New rear master cylinder, caliper, and pads. Comes with the following parts: original OEM Mikuni carb with throttle cable, original OEM master cylinder,
Caliber, and gas cap
Somebody re-jetted the carb and forgot to put all the screws back 😂😂😂😂. Great find
Mann this a bast to the past I’m still not finished with 😂🎉 have fun with it these decent 🎉
Could clamps and piece of aluminum can. Use some beads of jb weld under the edges .
What do you end up doing with the tins of quads and bike you buy and fix? You end up keeping them or just fixing and putting back in Facebook? Thanks!!! Great content.
Love the video but 20minyes?
Not today
You must do alright reselling them after fixed if this is your job that pays the bills. Great videos I enjoy watching you fix them
Oh yea I bet he resells them for double of what he paid most of the time
TH-cam pays his bills
Mummy and daddy pay his bills
If your measuring across the solenoid as in one lead on one side and other on the other you would read 12v until the slenoid engaged then you should read MV or close to 0 when it closes.
It would be interesting to see ahot rod build . That xl 500 would be a good one . 540 piston mega cycle cam ect
Was it missing the timing mark cover before the ride?
That header pipe fix was probably the worst thing I have ever seen You do on this channel!! 😂 Automotive heat shield wrap would have been a more appropriate fix in my opinion! 😮😮 I can smell the burnt rubber from here in Michigan!
The popping on De-acceleration usually means lean
So if you had a aluminum soda can I'd go for Mt. Dew may work a bit tighter than sheet metal. Keep up with the vids n yes I heard u say u were gonna try to get a new header pipe buddy
Good job joe!!
When are you gonna fix the hover craft ???
A good exhaust pipe fix is to use an aluminum soda can with top and bottom cut out, then clamped.
Is it missing the bolt for the timing mark?
You really need to make that corner where u park at one big corner berm so you can git it around that corner n keep on gittin it!!!lol! Nice quick fix n it does sound like it's got some snap to it!
If I had a extra I'd send u a roll but I dont...go to autozone or advanced auto and get a roll of metal muffler/exhaust tape bro....stuff is magic
How many minutes until the rubber exhaust fix fails? 😂😂
Exactly 30 seconds lol
More dirt bike content, please
You missing a timing plug on the left side?
Hi 2vinteg I want to know is it bad for my old Honda XLR 250R special to have a loose right exhaust valve?
20 min fix and a 45 min video ? I hope this means lots of riding and vinny chasing in this vid
yeah, I was wondering why that was in the title other than click bait.
Those tires are little better than slicks. No meat left on those.
WE LOVE THE JOE SHOW BECAUSE JOE WEBER PUTS OUT MORE CONTENT THAN ANYBODY!
always bypassed the tps on these. always seemed to be a problem with them
How do you get the tailgate to hang like that?
Also Joe if you see a 1986 -1988 honda trx 200sx jump on it. I THINK THE PERFECT QUAD GET ONE YOU WILL KEEP IT LIKE I KEPT MINE. PERFECT QUAD
Hi Mr vintage, do you do much boat motors? I have checked your videos but not alot there. Do love watching the bikes builds
looks like a bunch of things to fix, a go thing you know your bikes
I was hoping you would show the rubber exhaust repair light off 😂😂😂 what ever it takes to ride !
Are those deer tracks at your land in the snow?
Dude what do you do with all the 4 wheeler s? Makes for great content. Love your videos.
Real wreck u got but a great price i would soak the plastics and clean them then sand them and buffer them smooth then coat it in wax polish last it will make the plastics look brand new takes a bit but u can do it very good purchase to flip quick.