I Got Scammed Buying This Modded Out Race Quad
ฝัง
- เผยแพร่เมื่อ 27 ธ.ค. 2022
- I buy a modded out Yamaha YFZ450 race quad. #Yamaha, #Racing,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
When he said "I topped of the oil before you got here" RED FLAG !
yeah what is it a car lmao
One thing I'll mention. Compression testers have a check valve. Otherwise every time the valves opened on a 4 stroke or the piston dropped below the exhaust port on a 2, the gauge would loose pressure, the needle would keep bouncing, and you'd never get a good reading. So the needle not going back down when you stop means nothing. Need a leakdown for that.
But great video, I'm binging a bunch of yours. Awesome stuff!
I was going to mention this if no one else had.
Same thought
@@spike662 I dont know if it would work on a cylinder wal lol
Bump start it
Absolutely fantastic great knowledge i don't understand the negative comments great work guys
My gut tells me he had it running a couple months ago, thats what did the damage. It sat for a while and the mice got in it. then when he started it back up a couple moths ago all those popcorn kernels got sucked into the intake and caused the damage. Everything the kid says follows the story of the engine.
as a 17 year old that buys quads and bikes for cheap in winter and sells them for a profit in spring you teach me alot about these bikes love watching your videos and leaning about this stuff.
Go watch Michael Sabo this guy is a true pro , 2vintage is good and put alot of content but michael is a beast
@@pcostyle11 I also watch him them 2 are the main ones I watch
@@pcostyle11 Michael Sabo only shows the end result and doesn't show the in-between. but his builds are pretty awesome.
@@JumperXxXCableshe has videos of him building the bike.....how much filler do you require
@@JumperXxXCables bro i have been subscribed since he has a few thousand subs... he shows from start to finish lol idk what your talking about
Good move going back to OEM size to increase the wall thickness. All that extra power is totally useless if it’s not reliable. Your def better at diagnosing problems & getting engines tore down. Thanks for the great content & keeping my my mind occupied while I’ve been sick this last week.
@text
These Punks are as bad as this text thief!!!!
You should bring a battery starter with you to all of these buys. I never go look at a quad / bike without it.
And a compression tester,and a spark tester, People can't be trusted.
@@robc.5745 Problem is most people won't want you tearing down the quad that far to run these tests (unless the spark plug hole is super easy to access). At least with the battery starter you can hear it turnover (or not), which is half the battle.
@@danebowen729 Then I'll walk away. Loads of bikes out there for sale.
Scammed? Lol was it a joke?
Most major sport quads require the removal of some plastics and the gas tank to adequately access the spark plug hole. I cannot think of too many sellers who would be ok with a potential buyer disassembling that to run a compression test, lol. Understand if that makes you want to walk away, but it's definitely not the norm when purchasing a quad.
You are getting much better at asking the right questions!
Like a doctor when he goes to pick one up lol
Ive never been a good seller. As soon as someone starts nit picking my stuff to lower the price, after theyve seen 15 photos from evry angle and a written paragraph describing flaws, then show up and say "whats the least youll take for it....bottom dollar"?
They look puzzled when the asking price goes up 20 bucks.
thanks for your videos bro, i just recently start studing mechanic of the motorcycle, and i fall in love instantly ,and your channels is amazing! you really go deep in explanations and camera pans, i love it! sry for mi english, im from argentina, thanks bro!!
Joe you really need to pull that engine out and split it,run everything through the parts washer and Build her back up with new gaskets and I would probly replace the countershaft seal and the shift shift seal aswell.That nasty oil and particulated matter from the worn piston an cylinder have ran thru the bottom end and I would take a peak at the oil pumps aswell.Do it right the first time so u don't sell it to someone and then they have trouble and you end up having to do the job twice.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊..
There wasn't anything broken on the engine - like ring, piston or bearing. Just the cylinder wall was cracked and there are not much metal shavings from a scratched cylinder wall either. So just two frequent oil changes will do the job, not needed to put the engine a part just because oil and coolant mixed together.
Another brilliant video i love watching these diagnosis tear down videos 👌 you should email a few parts companies and try and get a sponsorship deal with them I see alot of other youtubers working with companies plus you have a good size following so defo worth it for them 👍
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊..
I love watching your videos. I just bought a 05 Raptor for $1500 because it wouldn't rev. It ended up being the reverse limiter
Definitely gotta do a part 2! Ready to see this thing rip
My guess is he wasn't lying. He did have it running. What he didn't know was a squirrel had put nuts in the intake. How it got past the air filter I don't know. Possibly he had the air filter off to clean the nuts out of the air box. He never noticed the nuts ready to be sucked in. When the piston came up it had high compression which meant no squish area for the displacement so the weakest component failed being the thin cylinder wall instead of bending the rod or cracking the head.
I agree 💯
Was thinking the same thing.
just posted the same comment without reading yours, 100% this is what happened!
I agree too
As long as there are fruit grains under the valves, there will be no compression, and when the entire cylinder passage is filled with grain, the cylinder wall must split. The head gasket did not fit the cooling channels. Thanks for the good broadcasts.
Love your videos! Very knowledgeable! Unfortunately there's allot of dishonest trash in the world. People saying u didn't get scammed because of the lower price, lol, it's still a scam because you flat out got lied to and the "we topped of the oil comment" is a dead give away. Anyway great job on the videos! 👍🏻
I watch a lot of your videos dude and to be honest with you you did not get scammed I don't even know how you could possibly fathom that you got even close to being scammed $1,500 was a steal for that machine especially knowing that it was rings that was stuck like come on man that's a $4,500 quad all day long and those things are cheap as s*** to rebuild if you do it yourself I like your videos man keep doing what you're doing but you definitely didn't get scanned
I think the seeds in the cylinder caused the failure. Check your air filter after storage people. Or just service your air filter often.
@Joe Shabidu So The seeds are compressible?
My opinion, judging by the sand and stuff on the piston, is, that it went under water.
I was thinking that same thing when i seen inside that motor. I think its a possibility
Great video! Just got my motor back from a shop, on my first ride the oil drain bolt fell out on the motor... Thankfully I caught it before it starved of oil! That would have been a few grand down the drain! Check your bolts even if you send it to a shop!
Better title would have been 'I was lied to when purchasing this quad' and even then not completely provable. A rebuilt YZF quad with aftermarket parts for half the price of listing is a pretty good deal especially if you do the work yourself. Great video as usual.
I love your videos man keep up the good work
5 minutes in and these guys are SHADY AS HELL!! It seriously looks like that 2022 reg sticker was pulled off another cycle and stuck on there.. We'll see if you can find the vin on there, but i'd NEVER buy anything without a vin, even if it was free.. Nope. Not doing it. Love your content, well you see I comment on every video you do awesome awesome work!! Thanks for the videos!
edit: you know what though, thinking about it.. I'm from Southern New Jersey. It's VERY fast paced here.. If I go meet up to buy something expensive (1500 bucks is expensive if you look at if for possibly getting burned) anyway, if you're not 100% about what you have, what you claim to have thousands and thousands of dollars into but are going to part with for 1500 bucks, and you're not 100% of what cam you have, what bore it might have, what brand piston it is.. nah bro, why are you even talking to me? But. It's different where you are, and I get that. But.. around here, nah man.. I'm not beat
Good deal , I would just be the guy that brings a extra battery to see if it starts and see how the idle is and if it smokes and what not , cheers to your and your motivation for wrenching on these
"I don't know if you remember me..."
"Were you there?"
"No"....
How's he supposed to remember you then?
Attempt to put Joe at ease about a quad they want to unload on him.
@@bigospig Spot on.
Was waiting on this one 😅 these yfz videos get a lot of attention 👀🤟🏻
Compression will not decrease on the tester. Unless you press the pressure release button. Not sure how you were watching it to see if it dropped.
Yup, he's still has a ways yo go, but he is getting better.
He is not getting better at what to look for when buying. He never checks any thing. Still a smoking deal.
Always go through scripted order checklist . Battery Pack and compression tester A Must . Keep the videos coming young man your doing a great job.🇨🇦
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊
Hey 2vintage, I love your videos and how you explain everything. I was just wondering if u could try buying a Honda foreman trx500 utility. Would love to see a video on one cause that's all I have to ride and you just make everything that much easier to learn
Respectfully I don't think you got scammed you got the quad for 1500 where I'm from that quads 4000$ all day 💯💯
yeah, it just sucks that they tried to hide the milky oil and told him that they've never used the kickstart
@@riley_swan yeah you're right they knew they were trying to get over on him them young boys keep playing them type games you will get somebody that might take that scamming s*** personal and they might wake up to all four tires flat💯💯😂
@@chickenbutt.3421 yeah, they think we were born yesterday lol
@@chickenbutt.3421 lol
Yeah. It seemed like they didn’t tell him all that they knew about the problem, but they sold it for the “ok, ya caught me” price. LoL
Those are maze seeds. Mouse definitely had a little winter stash going on lol . .
I always buy new now never used 40 years of buying used stuff tired of working on it but you keep on rocking your young.
You should do more videos of full engine rebuilds
You should make a check list . With your experience you should make a list to go by, like 5 things that you normally forget to look for. Great videos bro. Keep it up.
Number 1: Check the oil 😂
What are you talking about he got a smoking deal on this quad when he fix it he going make $1500 to $2000 on this quad
There is a decompression mechanism on the cam so maybe check if it’s stuck? You can get cams without decomp too
2vintage man ur a good guy really informative videos just know man theres people out ere that really appreciate u and ur content just wanted to say this man peace out
I've built countless 4-stroke race quads for Baja, MX & XC. I've never used 'big bores' for them. Always stock bore, usually stroked, always ported. Ported, oversized valves, stroked, high compression pistons gives sooooo much more power where you need it AND more reliability. Cylinder walls are a main reason. Big bore cylinders are junk. Granted there are exceptions, like LED big bores for trx250Rs and such.
Btw. What is all that crap in the intake and on the piston? You probably want to COMPLETELY rebuild that carburetor as well😬
Pretty sure there is a one way Schrader valve in the compression Guage whick is why you have to hit the release button to de pressurize. A leak down Guage would loose pressure if there is a leak.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊…
God dang, I'm learning so much from these videos.
you need to tell us more about what youre looking for when panning the camera around the potential buy other than that i love the videos!
I'd check the O-ring seal around the water pump it could be bad causing it to leak into the engine. Usually that's A sign of leaking water pump.,or bad one witch causes it to overheat the engine block. Then it blows out the head gasket in those YXZ engine's. YZ engine's to.
There’s always a steady supply of messed up 450’s out there for sure. These machines take a lot of maintenance and can be reliable for some time…no maintenance= time bombs. I prefer Raptor’s or even LTZ 400’s…much more reliable. Fun watching you figure out the failures and making it right.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊
ltz400 are great they are fun big powerfull they last long cause its a enduro or something people say. all 450cc are agressive engines = maintenance...
I don't believe you tried starting it without at least cleaning the carb
He always tries to start everything, before he even checks things 😂
New subscriber, so I haven’t watched all the videos but I love your channel and I’d love to see more videos of you buying these machines
Got to say you have came a long way and it sucks low life's out there still feel the need to lie hide and scam about stuff when you would have probably bought the bike either way good job man keep up the great work.
Always a great day when 2 vintage posts
All in all it wasn't a bad buy and your going to have to put less into it than you had thought you might. I feel if the guy would have told you there was possibly a blown head gasket you would have still bought it he may have known the cylinder was cracked but then again maybe not. Sounds like the seller really lost his ass on this one. Thanks for another interesting video.
Yes paying for two rebuilds, then engine going again.
I can see why he had enough of it.
@@paulbudford thats lies bruh, he just broke the engine once and sold it
@@tna-- he had the receipt for the work done, from a shop.
Exactly he def had receipts so he def didn't try ripping the guy off
You should run raffles and give away all the toys you buy after every video. You buy merchandise you get an entry. Just some advice to capitalize on your growing chancel. Love the videos.
It looks like it got ridden through deep water and hydro locked. Would explain the cracked cylinder and all the gritty stuff in the cylinder as well? Idk just a theory
Love my YFZ 450.
Still a good buy.
**Dude!!!ALERT!!!
That blown cylinder had a coolant port the gasket didn't have.Did you notice the gasket covered the coolant port right next to where the failure occurred???
Lay it back on the head and count the ports...there is your answer.😁👍
For sure!
Dude I need to move there that quad in my area would still go for the price he was asking no problem here in Ohio Great buy
I enjoy watching your videos. I learn a lot watching.
When using a compression tester, it doesn't trap the compression in the combustion chamber it keeps it in the gauge . You don't get scammed when buying something that you know it doesn't run . The seller can tell you anything they want so you take it all with a grain of salt
Keep up the good work! It really sucks whenever you get scammed. Good luck!
How did you get scammed they told you everything about it
@@projectclark123not really😅
@mx-productions5403 how did he not
@@projectclark123 They topped up the oil to hide the milky oil
@@riley_swan exactly ! There one thing! And tried telling him theve never used the kick start 😭😂 when it just didn’t have compression and told him it ran 1 month ago but doubt it
Really great videos, I have recently subscribed and you do a great job of explaining what you’re doing while you do it so for a newbie to ATV,s the information is invaluable.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊…
Awesome video but bummer deal!! I just checked on ebay. Plenty of cylinder jugs. Few new several used! Just thought would be of interest to you! Good luck dude!
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊…
Joe check the fly wheel moon key on the crankshaft it could be sheard of inside to. Causing it not to start up.& Run again along with having no compression to.,or A bad camshaft one on the top end witch throws the valves off to due that reason alone. Cause they can drop.,or loosen up from having A worn out camshaft inside of the top end to.
That's gonna be a sick quad when it's completed
My 01 WR290F had the manual decomp system removed when I swapped the cams. Now it kicks over smoothly almost like a 2 stroke. I can start it with my arm if I give it a good one. Definitely look into it.
You should have done a cylinder leak down test before pulling the head. You can make an adaptor to fit your air hose to that coupler in your compression tester. With that oil I suspect that the head gasket is gone but with all those seeds I suspect that a valve is not completely closing. Since you jumped the gun you will have to grind the valves anyway.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊
Just discovered your channel tonight… and watched two of your videos… one thing I noticed is you kick and crank on things way too long.. that obviously aren’t going to start.. and like most people when shits starts you immediately wand to wind it up without letting the motors warm up.. also I always check the air filter when contemplating buying something… if you had you would of seen the mouse seeds and there’s no reason you couldn’t of cracked open the drain bolt to see what came out… especially since it didn’t run… still you got a good deal… anyway I like your channel.. your doing what what I always wanted to do… the buying, fixing up and selling of power sports.. lots of car channels but not a lot of your type… I was hoping you had a KDX200/220 rebuild video.. as I have one but have never rebuilt it.. it probably has 5000 miles on it and still runs perfect… so I’m reluctant to tear it down… last question.. is there a sequel to this video? As I see it’s 11 months old.. I don’t see one.. if there is please post a link.. thanks oh…
Your buying quads like a mad man!! 😂 love it!
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊..
*You’re
Could you try to find a Polaris outlaw 525? That would be awesome if it works
Wow , nice score and exceptional experience !!! Lots of high end components 👍👍 i drive a Tundra too joe , have worked for Toyota 25 years now !! Imo you have best channel on the tube !! More mx bikes though lol 😆
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊
This just gave me bad flashbacks to my boat . Block cracked in 2 places. One weekend ,JB weld been running great for 6 years..
I think sometimes Joe conflates "what they go for" with "what they're listed for". The $4000-$4500 listed YFZ's sit on marketplace unless it's like new or completely done out.
That’s very true. I watch them sit there and the price continue to drop. Went and look at one last week for $3500 , took it for a test ride and it started spitting coolant and oil 😂 I said have a good day buddy lol
If one invests in upgrades and sells the machine before the upgrades are worn out, one can expect aa little more money for the machine. Seems like some kids believe they can pass the cost of repairs, including the cost of consumables such as chain and sprockets, spark plugs and tires on to the buyer. Can't do that kids. You've had all the fun on those tires and engine that wore out after many hours of riding or less hours and neglect. That money is what you paid to have your fun. The next owner will incur their own expenses. Learn to be omnidirectional and drop the one way thinking, it's a bad look.
Well said John 👍
You never get back what you've spent on a bike.
My wife asked me if I'm going to kill somebody again. Because I built my cousin a Ducati monster engine. And it killed him. I said no I just like watching you. Keep up the good work Buddy. 👍
Wow, was not expecting a comment like this. I think we need more of the story of what happened.
That can do it to. It might just be low.,or have A bad water pump if it has A radiator on it.
$1500?!?! Great price. Even with parts and labor...you should come out ahead
I'm wondering how those seeds got through the carburetor into the combustion chamber. I'm still learning how stuff like this happens
Those are maze seeds and they were a mouses winter stash. They got in the combustion chamber because they didn't check before trying to fire it up and as soon as they cranked on it they were sucked right into the engine.
@prophez23 thanks...I didn't take into account the air/gas that's sucked in on the intake stroke
@@prophez23 that’s a sad way to go. I always check the airboxes every time they sit. I almost blew up a scrambler 500 because the air box was full of gas and tried to hydro lock the engine but I got lucky
Plug was probably out at some point while it was sitting. Or rodents. Rodents can can absolutely destroy engines and wiring if they sit too long with no attention
Hahah. Yeah right. That motor needs top to bottom
I don't see how you got scammed even with the sellers story? I think if you paid 2600 for it then I would agree. Anyway, I love your content and ability. Great stuff Joe!!!
I agree you don't get scammed when you choose to buy a non running quad
They intentionally topped off the oil to hide and lie what was wrong with the bike that's a scam man I don't care if he paid 500 for it why lie and cover it up? That's what's wrong with people these days
@benschlack5814 you do if the person lied and hid the truth from you even though they didn't have to because it was sold at a okay price
@@chrisrambo6810 just like he lied when he sold it to the guy a year ago saying he did proper repair work he only got to ride it 2 times and joe put copper rtv on the head gasket that's shoty workmanship which is a scam
When you get more than the seller(multiple friends) trying to help with sale, it's usually a Red flag, guy was a veiwer of yours trying too pull a fast one, Or He and friends Knew what was Wrong and Were testing You😂 anyway Great job as usual, deducing the possible problems, you still ended up on top!👏👏👏
i seriously wished i lived in a big country like the US or Canada where i could also make a living on TH-cam buying, fixing and selling recreational vehicles. There's a massive market over there and plenty to choose from. I have all the tools and know-how but just don't have access to enough vehicles to make it full time or even part time really. My country is small and the market for quads and bikes is just too small, and so everyone here wants top whack prices for scrap and aren't easy haggled.
That is a good buy, I would snatch it up.I wonder if it's got a decompression thing stuck open or something.
Did you just quote exactly what he said? He even said he doesn’t think theirs a decompression valve on it
Don't worry 2vintage I got faith in you ❤️
Check the CDI box.& The stator pick coil.
Was all the grit from stop leak they put in the radiator possibly? Great breakdown.
Literally why I never big bored any of my quads.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊…
Getting scammed by locals really makes me lose faith in my community. Too bad
He should literally say their name and where they are, so nobody has to deal with them. Seems like a fair deal.
@@giraffeapproved I agree with you. But I think that's part of his deal. Joe doesn't try to bash anyone and just sticks to the mechanics.
At some point, he will have bought all the scammed and junked machines so all thats left is the good stuff! 🤣
They dropped it to 1500 if they would have stayed at 2600 then he got scammed otherwise he didnt so STFU. Even if they knew it was milky oil it still could have just been a head gasket or the water pump seal!!!!!! they didnt know the head was cracked!!!!!!!!!!!!!!!!
@@giraffeapproved And how was he scammed? Guy buys a 1500 dollar quad that has no compression as tested on the sight. It was not bough as a runner at a normal price, not even close. Always second guessing every seller and these youtube titles, geez, been watching this channel for a long time but its getting ackward. I would not sell this guy a thing. Buys the cheapest stuff out there and makes money flipping them. Acts like expecting top dollar stuff tho.
@@EinarLerschen told him it was running 2 months before. Don't think the seller was telling the truth about that.
I use pretty much same stes as you do when doing initial checkout, I also do a leak down, then compression test.
It's A blowout head gasket.& Possibly bad water pump back flowing coolant inside of the engine crankcase block port holes.
The scam was the blown head gasket, and I bet that cp piston was high compression
A way to weed out the scammers on non running vehicles is ask if you can bring a bore camera. If they are lying they will either say no, tell the truth, or ghost you. Saves you time and headache. If they have no clue about the issue, then if it is messed up severely thats leverage for a cheaper price.
You must be incredible to hang out with, you are such a huge wealth of knowledge, able to seem to be able to do anything!
Just o5 and o6 need oil mod.
Fyi if you unload the quad from the truck stand on the front brake lever side and use the brake to control the unloading down the ramp.
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊.
1500 and you got scammed? I did click to see why tho so it worked. What do you call that again? Click something?
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊….
I want a yfz !!! Good luck
Great vid, yeah for sure even if you add a few greens its still gonna be a killer deal.
You need to get a small 3 volt sure fire flashlight, love em here. Save my but a lot. The valves are way to tight, I'm betting.
Not too bad really joe suppose things could have been worse be good to see it built back up and running and if you do sell it on it should make good money I’d call it a win I know it’s your time fixing it but will be worth it for defo take care man and all the best 👍🔧🔧🔧👌
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊.
2vintage has the newbie buyer stamp all over his body. 9 out of 10 times he buys the mc/quad/utv/etc in THE DARK using only his mobile phone as a light source. ALSO: If the whole family / neighborhood shows up to the deal I would turn around fast as fkk. ONLY the seller can be there. If he is a minor then at least one of the parents must be present. Nobody else.
I can see that, it's a bit tough for him though because he's a youtuber they watch, so it could be just fans trying to talk to him. For regular sales to regular people I completely agree with you, the more people the less merrier.
Lol yeah ok buddy .how you are talking he is only person buying quads he knows he rip them kids off big time
@@funtyes1970 no he doesnt the seller knows whats wrong with the bike but the buyer doesnt
And the arms aren’t “thrasher” arms, those are just stickers. The dude who owned it put alba arms on it to go with the alba bumpers/grab. I checked this quad out lol
Damn dude have to admit that you put in lots of work !
Now you have 2 of these completly tore down lol
Yeah the other one has the parts ordered! Should be here this week!
Excellent I'm ready for that video!
Not sure you were "scammed", as much as just case of ignorance. Seller lost, and you benefited off his misfortune.🏁
ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ 🎁🎁🎊🎊…
You came out like a champ on this quad you can fix and flip this thing for a big profit 👍
Why cuz he scammed the seller telling them going cost over $1000 to fix it yeah he is sure a big champ on this. Tell you what I never sale or buy anything from him I wouldn't trust him talking about a scammer
@@funtyes1970 How the hell did he scam the seller. The seller tried to hide the real problem with it.
@@sixgun2719 lets see he told seller it going cost him over $1000 to fix this quad so seller drop take $1000 off from asking price. and in real life it will cost him $400 to fix that quad .. when he fix quad he can sale this quad for $3500 to $4000. this isn't only seller i see him scam a seller before . so he can easy make $2000 from this quad in my eyes he scam that dude big time . and you know what scam means right ?..when someone lose a lot of money from a person ..did Joe lose any money on this deal? no he didn't he never got scam so Joe lied about that to saying he got scammed when he didn't
What's up with honda trx 700?
Still waiting on parts. Parts were returned to seller because there was a problem with shipping. I should be getting the parts this week!
you can remove the compression tester Schrader valve and apply air from the air compressor to test valve seal in the combustion chamber
I remember the Suzuki 50. It was a 2 stroke Trail Hopper, if that's the one his dad sold to you.
love when people don't know anything about their bike that they have "over 6 grand into"
There are so many dishonest scammers out there now it sickening. People have truly lost their moral compass!!!