Thank you, sir. Clear instructions with expected results for each step. Oh and no crazy fades, effects, sound effects, etc. -- just knowledge transfer. Thumbs up!
Thank you Sir, with your video and my instructional manual that had slightly different instructions, I got the courage to try and it saved me over $100, no need to hire anyone! Trruly on behalf of all women, thank you for your video!!
Thank you! After watching quite a few other videos and nothing working, I about gave up and bought another keypad. I watched your video and it worked! THANK YOU SIR!
Wow, thank you, changing out the lightbulb is stupid but that seemed to be the ticket. I was just about to tear into the circuit board and saw this video
I have a lift master key pad and an Access Master garage door motor, nothing seems to work, I've tried it ove 20 times .. It was working prior when I was programming my Siennas Homelink garage door opener.
I have a Liftmaster 3800PC direct drive opener without a light, how do I know when the code has been accepted? I've tried 20 times with no success using this method.
My red light never comes on the outside keypad. Got the new lift master garage door opener synced to my car and to the remote inside the garage, but I need the outside keypad for when I run. And it lights up (so there is power) but there is no red light. I still do all the other steps with learn button , 4 digit code etc, but keypad does not work( it did with the old opener which was 2002). Suggestions?
@@YoniFrenkel no I have not. I think I’ll call the people that installed it and if they don’t do anything I’ll just replace the outside keypad. Think they are around 30 or 35 bucks or so.
actually, what happens is this. When you press and hold the star and pound keys, the keypad leds flash. Keep holding until it stops flashing and remains solid (the keypad leds are red)
This routine for programming DID NOT WORK with the newest version of this keypad. They have changed the programming sequence, so read the instructions.
Mine didn’t work that way I had to press the enter button 3 times because of the learn button color. Each color has a diff number maybe that’s a good tip on others peoples learn button color
Same. I tried the instructions on the LiftMaster keypad door, no help. Then I pulled up this video. I have the 877MAX with a Craftsman motor. Everything is good up until you hit “Enter”. No light blink and if you hit “0”, it’s just a bunch of flashing.
I had the same problem. I was pressing the Enter button after entering my 4 digit pin. You have to hold down the Enter button until the light blinks. That should fix your problem hopefully.
So this follows the directions on my Liftmaster opener except they say if the light doesn't flash keep pressing the "enter" button until it does. Then hit "zero" button. I couldn't get mine to flash light and it never programmed. This is the initial programming of it. What's going on. Seems to work smoothly for you.????
Well, aside from the hideously overdone intro, your HUGE ERROR is that one needs to START WITH THE DOOR CLOSED! Cretins. Had to go to the Liftmaster factory video to get it done. And get the guitar player some lessons. Yikes. Friggin’ yikes.
I programmed my keypad with the door open. Not a huge error on their part. You may have a hugely different garage door opener, although it shouldn't make a difference whether the door is closed or open.
Thanks for the info. Consider trimming the intro. 40 seconds is overboard.
Even
Yeah I had to fast forward multiple times 😅
I second that. I came for help not an intro
Excellent brief instructions and good advertisement for your company at the start of the video.
Thank you, sir. Clear instructions with expected results for each step. Oh and no crazy fades, effects, sound effects, etc. -- just knowledge transfer. Thumbs up!
Thank you Sir, with your video and my instructional manual that had slightly different instructions, I got the courage to try and it saved me over $100, no need to hire anyone! Trruly on behalf of all women, thank you for your video!!
Thank you! After watching quite a few other videos and nothing working, I about gave up and bought another keypad. I watched your video and it worked! THANK YOU SIR!
Thank you so much! I accidentally deprogramed mine and the instructions were lost. This video worked beautifully.
Thanks buddy!Your instructions are the only ones that helped me get this keypad programmed.I really appreciate your help!
I watched a few videos and they did not explain this clearly. Thank you for this clear and concise video!
After Ann hour of watching videos that didn't work, finally yours was simple and worked great! Thank you
Wow, that fast i reprogrammed the keypad.. thank u so much!! I’ve been in this house for 9 months.. ugh. Should’ve done this a long time ago
Thank you for the short and sweet video. The instructional paper On inside of my keypad wore off, this video was a big help
Best video for this. Tried a few others that the code didn’t hold. Or didn’t work at all. This one’s worked.
Perfect - thank you! None of the written instructions worked - this was exactly correct...
Thanks for that. Your instructions do not match my paperwork, but most importantly you instructions WORK!!!
Pretty sure this was the same instruction on my unit but they made it so confusing. Thanks for explaining it in simpler terms.
Simple and straight to point. Love it
great video - much better than the liftmaster printed instructions...... thks so much - made my day better
Thank you. The manual for both the garage door opener and keypad are horrible. Your video fixed me up! Thanks
Worked like a charm. Thank you for clear instructions.
Well done video. Instruction worked first time. Thanks for the effort!
Thanks for the info...it was exactly what I needed to do the job today.
Great video,worked the first time i tried it.thank you
I agree. the only 1 that worked .. wish I'd looked at this 1st.
Helped me for my new house. Thanks.
Wow, thank you, changing out the lightbulb is stupid but that seemed to be the ticket. I was just about to tear into the circuit board and saw this video
Simple and quick! thank you for the explanation!
Worked for me … thanks a bunch!!
I programmed a new remote yesterday and it wiped the keypad clean. Can I use both the garage door opener and the keypad or just one or the other?
Thank you. Worked as you said.
Thank you for clear, concise instructions on this. The instructions on the keyless entry pad was not correct.
Just what I needed, thank you!
I have a lift master key pad and an Access Master garage door motor, nothing seems to work, I've tried it ove 20 times ..
It was working prior when I was programming my Siennas Homelink garage door opener.
So to set a temporary code, I have to climb a ladder to press the "learn" button and then climb a ladder again to when changing it back?
Work like a charm, thank your Sir!
Worked perfectly, Thanks
Can two doors be programmed to the outside keypad at the same time?
my keyless keypad does not have an "enter" key. what should I use?
Jenny Klinefelter what kind of keypad do you have?
Excellent. Thank you!
Very helpful . Thanks
I have a Liftmaster 3800PC direct drive opener without a light, how do I know when the code has been accepted? I've tried 20 times with no success using this method.
How to change the battery? The keypad is getting dimmed so maybe the battery is dying?
Worked for me! Thank you!
what if no * and # button?
My red light never comes on the outside keypad. Got the new lift master garage door opener synced to my car and to the remote inside the garage, but I need the outside keypad for when I run. And it lights up (so there is power) but there is no red light. I still do all the other steps with learn button , 4 digit code etc, but keypad does not work( it did with the old opener which was 2002). Suggestions?
Did you figure out how to make this work? I have your exact same issue
@@YoniFrenkel no I have not. I think I’ll call the people that installed it and if they don’t do anything I’ll just replace the outside keypad. Think they are around 30 or 35 bucks or so.
@@YoniFrenkel try new battery & try syncing again.
@@adwinters2063 Try new battery and sync again
actually, what happens is this. When you press and hold the star and pound keys, the keypad leds flash. Keep holding until it stops flashing and remains solid (the keypad leds are red)
Clear precise!!! Thanks
Thank you man ❤
What if I don’t see the solid red light with a fresh battery?
This routine for programming DID NOT WORK with the newest version of this keypad. They have changed the programming sequence, so read the instructions.
What if light never stay on when you press star and pound button
This trick works till today
Wow So Easy even I can do it!!! Thanks
On every one of ours (8) there IS NO "Enter" button on the keypad
Mine didn’t work that way I had to press the enter button 3 times because of the learn button color. Each color has a diff number maybe that’s a good tip on others peoples learn button color
Didn't work at all. We tried it about 20 times. The light on the motor unit never flashes and nothing happens
Did you figure out the issue? I have the same
Problem.
Same. I tried the instructions on the LiftMaster keypad door, no help. Then I pulled up this video. I have the 877MAX with a Craftsman motor. Everything is good up until you hit “Enter”. No light blink and if you hit “0”, it’s just a bunch of flashing.
I had the same problem. I was pressing the Enter button after entering my 4 digit pin. You have to hold down the Enter button until the light blinks. That should fix your problem hopefully.
So this follows the directions on my Liftmaster opener except they say if the light doesn't flash keep pressing the "enter" button until it does. Then hit "zero" button.
I couldn't get mine to flash light and it never programmed. This is the initial programming of it. What's going on. Seems to work smoothly for you.????
Awesome thank you so much got it
Really good 👍🏽
What if mine doesn’t have an enter button?
Didn’t work on my 3240M liftmaster/chamberlain
Thank you,
Thank you sir!
Thanks!
My keypad has no enter button.
Go to the point. ...
Thank you good sir
Thanks
I have this system, with remote attached remote outside, none of this works...
Kenny Poe yeah same I don’t know what’s wrong
Yeah same thing remote attached outside none of this works.
Did NOT come close to working. Watch the official Liftmaster video.
Didn't work for mine
Didn't work for mine bummer
My god the most generic bob ever to make a video of tons of things in the video that waste our tome
Intro was grueling
Star & pound didn’t do anything
Exactly period star a pound don't do anything no flashing red nothing.
0:47
Not working
music too loud....
The musical entry goes too long
Didn’t worj
Worthless............
Well, aside from the hideously overdone intro, your HUGE ERROR is that one needs to START WITH THE DOOR CLOSED! Cretins. Had to go to the Liftmaster factory video to get it done. And get the guitar player some lessons. Yikes. Friggin’ yikes.
I programmed my keypad with the door open. Not a huge error on their part. You may have a hugely different garage door opener, although it shouldn't make a difference whether the door is closed or open.
Works just fine with the door open you fucking jackwagon.
doesnt even work.smh
0:59
0:36