Visit my Amazon Storefront for garage door parts and more www.amazon.com/shop/weldingandstuff/list/38F5CD0NISCMC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_7MYGWGEQK738604C1R1J
God bless you my friend for being the only one who correctly shows how to program the keypad. After floundering all afternoon with lots of "advice," you showed the way!
My keypad stopped working and thought our snow might be messing up with the electonics. Worked on it with different videos here and was getting frustrated. Found yours and worked after 2 tries. Thank you so much.😊
Well done sir. I specially like the phrase “ these instructions are wrong”. Been working on this project for several hours and your video is the only one that solved the problem. Keep up the good work.
Just wanted to thank you. Got the new keyed opener and went to program it. Followed the instructions religiously and it wouldn't work. Went and got a new battery to see if that was the problem. No, and did I mention it was 22 degrees below zero. I had to pull the emergency release and if as the opener didn't work I would have to leave the car in the lane as my opener if the car wouldn't work either walk the entire length of my building to the front and then open the door manually. Got your video on line, followed you instructions and voila it worked first time. Thank you sir, you are a life saver.
Man, I been trying to program this thing for 3 hours. Followed directions on the manual, the manufacturers youtube, random DIY blogs, and finally I found your video and its the only thing that worked. Thanks!!!!
I won't lie, I didn't think there was a chance in a hell this would work with my Liftmaster. I had been trying for days to get the company recommended method to work and was willing to give anything a shot. Will this man's video worked like a charm on the first time...the guy us a miracle worker.
I spent DAYS trying to reprogram my garage door until I came across this video. YOU ARE THE MASTER!! THANKS! I had the same old instructions that did not work! THANKS!!!!
My keypad and three remotes have never all worked at the same time. The keypad hasn't functioned properly in over a year. I watched every video I could find and nothing worked for my keypad until I found your instructions and followed them exactly. Many thanks for sharing.
These instructions are still working, beautifully!!!! I had a cat sitter at my house for three days. It looks like she took it upon herself to cancel the temporary 4 digit code I had programmed in the keypad on her final exit. So, instead of changing the 4 digit number, I had to start all over again and program the keypad. Thank you, again, for these instructions!!!
Once again you saved me! I found your video after hours of searching the first time. My son and his hunting friends tried to "fix" the opener last night following the printed directions... So it's messed up again. I just sent them a link to your video and I hope they can follow it and fix it again.
Omg!!! THANK YOU!!! After struggling for over an hour with instructions on the remote and being unsuccessful, I watched your video and did it in one minute!!! God bless you!!! Thank you!!! ❤
This guy is right. The instructions in the keypad is totally wrong. I followed what exactly he says and there you go. Thank you so much Mister. You helped me a lot. God bless !‽
Just found your video. Saved me pulling out my hair. I couldn't get the code changed. The door would not open with the keypad. Followed your super clear instructions and voila. All good. Thanks so much for the help.
Thank you soooo much for your video on the garage keypad! I looked at many but only yours worked for me! As a single woman I am so happy! God Bless You! ❤❤
Well, thank you very much for that video and the. carefully thought out instructions that went with it. I had just spent over an hour trying to use the direction. that you obviously didn't have any luck with And I gave up on that and found your video and the whole thing took me about 15 seconds. You're a wonderful human being for putting this up there. THANK YOU!!!
Holy crap. I’ve been trying to do this for 2 days now and couldn’t it to program and I finally came across your video and got it to work the first try. Thank you so much my man!!!
Thank you so much for the great info. I used the instructions on my old pad, and also the videos from manufacturer and nothing worked. Your video was spot on and I was able to reprogram in 10min. Thank you!!
I just got off the phone with Chamberlian. We got my remote to work BUT there is a secret that they had me do that everyone should know. To clear the KEYPAD memory and restart with a clear brained keypad, they had me do the following: - Press and hold the ENTER button for 45 seconds, then release. On some models: Press and hold the ZERO 0 button for 45 seconds, then release. If in doubt, do BOTH. This clears out the memory of the keypad. Then proceed with the above process in the TH-cam video above. This finally worked for me and got my keypad working again. (To recap. no matter what I tried including the above process, my garage door motor lights would never accept the code from my keypad and blink. But all other handheld or built-in car remotes associated no problem.)
Thank you so so so very much, as useful this video is, I wouldn’t be able to make it work without your advise, I truly appreciate you posting this comment
I cannot thank you enough!!! Saved me from calling someone to come out and fix mine. The other videos were not helpful at all, too much yapping and so confusing. Yours was so simple!!!!
Thank you for clarifying the Chamberlain keypad instructions in your video. A couple of days later still trying to program it, out of my frustration with it I returned it and exchanged it with a brand new one, thinking the keypad was probably defective. Then I came across your video listening and doing exactly steps by steps your instructions I got it done less than 1 minute.
Thanks for this, it is the ONLY instructions that actually worked for my keypad, I have been trying different methods for almost 2 years - problem solved!
Man, this was helpful because my unit has no distinctive "learn" button, just a black and red one. The unit does not say what these are! Thankfully, your video has that in the keypad!! My keypad has the work one in there, too. Now it works. Thanks so much!
You sir are my idol. After fighting the not so correct instructions that came with the unit, following your instructions instead solved my problem. I am one happy camper!
Hey man, thanks for this video. I was banging my head for 10 minutes trying to figure out the instructions following them exactly nothing worked your video worked first try much appreciate it.
thank you I bought the keypad today I followed the instructions and the door would open but would not close no mater what I did. I was going to take it back to lowes but I got on you tube and found your video now it opens and closes thank you aging!!!!
Thank you for your video. I was having problems programming a new keypad while following all the instructions which came with the keypad. When I followed your guide, it worked the first time. The difference was that in your video you indicated: "Enter and Hold the Enter Button until the light blinks", other instructions said, "Enter and Release the Enter Button" which is incorrect. Other TH-cam videos also had the incorrect instruction.
Thank you so so much! I had been fighting with my keypad for a week and it’s only a year old! Your instructions are spot on!! Thanks again for saving my sanity… the sound of your voice played a big part too!!🤭🤭🤭😍😍😍👏🏾👏🏾👏🏾
Thanks!!! I was trying to fix for hours!! I appreciate ur video and having the correct instructions!! Needed to press 3 times. Just saved about $100 dollars!!!
Thanks, so much, I couldn’t get my code to work while trying to follow the instructions on the keypad for nearly an hour! I did it your way and it worked like a charm.
I just programmed the same exact opener and you are 100% correct. I used the instructions on the old keypad and it wouldn’t work but the new instructions, there are no problems.
Thanks you Sr. I was going crazy trying to program my remote following the in package instructions, I followed your instructions and like magic, I even set a second code for my second door, I even bought a newone, I'll return the one I bought tomorrow, thanks again.
Thank you for posting this video. I was following the instructions on the keypad, and was getting nowhere!!! The key for me was in the final step. 1.) Press the learn button on the garage door opener, 2.) put in the 4 digit code, 3.) HOLD the enter button until the garage door light flashed or I heard a click. Holding down the enter button was what caused the keypad to work. Thank you again for posting!!!!!!
Man, our house built 15 years ago and after following the directs provides to mo end, I thought it was just time to buy another keypad. But this worked like a charm!!!!!
I have struggled for so long getting this to work. Your video was perfect. My purple button had faded to brown so that was an extra challenge. Thanks for doing the video!
Seems the correct step is to enter your 4 digit pin BEFORE pressing the learn button on the garage opener not AFTER. Other than this step being reversed, the instructions were almost the same. Thanks for taking the time to make this video, just did this today. Worked fine. Much appreciated.
Perfect instructions, once you find the correct ones. I needed to reset an existing PIN from the previous owners. Your screenshot of those instructions were spot on. Thank you for posting!!
Thank you Bro. I was stuck after so many times trying to program this stupid universal remote to liftmaster garage door opener. With your help I finally did.😊
Thank you Sir! We move into a home and there were no instructions on how to change the code. I tried the online manual and other videos with no luck UNTIL I came across yours. THANK YOU!!
Thanks! This was very helpful! I also purchased a new keypad thinking my old one didn’t work: but, after following these instructions, this new one goes back!😂
You just saved me at least another day freezing my butt off in the garage trying to figure out what's wrong with my 6 year old keypad. And at least a day's worth of arguing with the wife. Thank you, thank you, thank you.
Took a few tries but I was able to enter a new code since the previous owner had moved out. So far so good! Great advice and well done video. Thank you 🙏
darn straight. My button is orange, as stated on liftmaster...but button and the antenae are purple. So used your purple instuctions....and it worked!!! Thank dude.
Another new fan and subscriber here!!! I can’t overstate how frustrating the keypad instructions were and how great your video is!! Thank you so very much. 🙏🏽
Great video dude. I have the same instructions but I was breaking the steps down according to the window panes in the instructions. So after putting in my PIN and the # I was waiting a second to enter once ( I have the yellow button). Now I Have to figure out how the LJ8900 signals that it's in learn mode.....YOur video made a ton of sense when you walked through it....
Do you know what you've saved me from? I brought in all kinds of experts and handymen to help me but none could figure this out. Your instructions were straight to the point and it worked. Thank you
Thank you for these correct instructions, it worked perfectly! Was frustrating that the instructions that came with the keypad failed for our dual keypad opener.
Thanks! I just did this and it works much better! I used to have to keep pressing enter a couple of times and it was a pain! Now it opens right away with pin and enter!
Thank you it actually work correctly. I can’t believe they printed the wrong instructions inside the cover. Super frustrating. I did your technique it worked fine
Visit my Amazon Storefront for garage door parts and more www.amazon.com/shop/weldingandstuff/list/38F5CD0NISCMC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_7MYGWGEQK738604C1R1J
God bless you my friend for being the only one who correctly shows how to program the keypad. After floundering all afternoon with lots of "advice," you showed the way!
Ya ya ya 😭🤡
Thanking for showing in under 4 minutes what most on TH-cam would take 10 minutes to show. Straight details, no fluff talk.
My keypad stopped working and thought our snow might be messing up with the electonics. Worked on it with different videos here and was getting frustrated. Found yours and worked after 2 tries. Thank you so much.😊
Well done sir. I specially like the phrase “ these instructions are wrong”. Been working on this project for several hours and your video is the only one that solved the problem. Keep up the good work.
Just wanted to thank you. Got the new keyed opener and went to program it. Followed the instructions religiously and it wouldn't work. Went and got a new battery to see if that was the problem. No, and did I mention it was 22 degrees below zero. I had to pull the emergency release and if as the opener didn't work I would have to leave the car in the lane as my opener if the car wouldn't work either walk the entire length of my building to the front and then open the door manually. Got your video on line, followed you instructions and voila it worked first time. Thank you sir, you are a life saver.
Wow, I have been messing with mine for 2 years. You are the only one on the Tube that knows the correct way. Thank you!
Man, I been trying to program this thing for 3 hours. Followed directions on the manual, the manufacturers youtube, random DIY blogs, and finally I found your video and its the only thing that worked. Thanks!!!!
Same here, quite a few days a tried to pair it and wouldn't work, until THIS VIDEO. MANY THANKS
Finally a brother with straight talk!!! straight to the point with total accuracy!!!! SUPER KOOL...
I've looked at almost a dozen videos trying to fix my issue and they all led me wrong until this one. Thank you so much and good job, my friend.
Glad it helped
I won't lie, I didn't think there was a chance in a hell this would work with my Liftmaster. I had been trying for days to get the company recommended method to work and was willing to give anything a shot. Will this man's video worked like a charm on the first time...the guy us a miracle worker.
I spent DAYS trying to reprogram my garage door until I came across this video. YOU ARE THE MASTER!! THANKS! I had the same old instructions that did not work! THANKS!!!!
My keypad and three remotes have never all worked at the same time. The keypad hasn't functioned properly in over a year. I watched every video I could find and nothing worked for my keypad until I found your instructions and followed them exactly. Many thanks for sharing.
I watched 4-5 different videos to reset my garage door keypad. This was by far the easiest to follow. Thanks
I didn't even have to sit and watch your video first. I just paused you. Your video was the only one that worked! Thank you!
I was following the instructions on the remote and was getting so annoyed it wasn't working. You are a life saver my friend.
You rock! Totally worked..that door hasn’t worked for over a year, and now works perfectly! Thank you! Thank you! Thank you!
You are welcome; don’t use LED lights in your garage; they will interfer with the signal
These instructions are still working, beautifully!!!!
I had a cat sitter at my house for three days. It looks like she took it upon herself to cancel the temporary 4 digit code I had programmed in the keypad on her final exit.
So, instead of changing the 4 digit number, I had to start all over again and program the keypad. Thank you, again, for these instructions!!!
Once again you saved me! I found your video after hours of searching the first time. My son and his hunting friends tried to "fix" the opener last night following the printed directions... So it's messed up again. I just sent them a link to your video and I hope they can follow it and fix it again.
Omg!!! THANK YOU!!! After struggling for over an hour with instructions on the remote and being unsuccessful, I watched your video and did it in one minute!!! God bless you!!! Thank you!!! ❤
Glad it helped!
This guy is right. The instructions in the keypad is totally wrong. I followed what exactly he says and there you go. Thank you so much Mister. You helped me a lot.
God bless !‽
Just found your video. Saved me pulling out my hair. I couldn't get the code changed. The door would not open with the keypad. Followed your super clear instructions and voila. All good. Thanks so much for the help.
Thank you soooo much for your video on the garage keypad! I looked at many but only yours worked for me! As a single woman I am so happy! God Bless You! ❤❤
Well, thank you very much for that video and the. carefully thought out instructions that went with it. I had just spent over an hour trying to use the direction. that you obviously didn't have any luck with And I gave up on that and found your video and the whole thing took me about 15 seconds. You're a wonderful human being for putting this up there. THANK YOU!!!
Great video was struggling to program my garage keypad with manufacturers instructions. Watched your video and solved the problem right away.
Thank you! Gracias! It was sound simple to set up, but most of us got the wrong instructions. Well done señor!
Holy crap. I’ve been trying to do this for 2 days now and couldn’t it to program and I finally came across your video and got it to work the first try. Thank you so much my man!!!
Thank you so much for the great info. I used the instructions on my old pad, and also the videos from manufacturer and nothing worked. Your video was spot on and I was able to reprogram in 10min. Thank you!!
I've been watching different tutorials but only your instructions it works. Thank you sir.👍
I just got off the phone with Chamberlian. We got my remote to work BUT there is a secret that they had me do that everyone should know. To clear the KEYPAD memory and restart with a clear brained keypad, they had me do the following:
- Press and hold the ENTER button for 45 seconds, then release. On some models: Press and hold the ZERO 0 button for 45 seconds, then release. If in doubt, do BOTH. This clears out the memory of the keypad. Then proceed with the above process in the TH-cam video above.
This finally worked for me and got my keypad working again. (To recap. no matter what I tried including the above process, my garage door motor lights would never accept the code from my keypad and blink. But all other handheld or built-in car remotes associated no problem.)
Thank you so so so very much, as useful this video is, I wouldn’t be able to make it work without your advise, I truly appreciate you posting this comment
Of all the instructions on YOU TUBE, this is the VERY BEST, it's simple to follow!!!!
Glad it was helpful!
I cannot thank you enough!!! Saved me from calling someone to come out and fix mine. The other videos were not helpful at all, too much yapping and so confusing. Yours was so simple!!!!
Thank you very much! My keypad also had the wrong instructions. I spent an hour before I saw your video. Your instructions were perfect. Thanks again,
Thank you for clarifying the Chamberlain keypad instructions in your video. A couple of days later still trying to program it, out of my frustration with it I returned it and exchanged it with a brand new one, thinking the keypad was probably defective. Then I came across your video listening and doing exactly steps by steps your instructions I got it done less than 1 minute.
Thanks for this, it is the ONLY instructions that actually worked for my keypad, I have been trying different methods for almost 2 years - problem solved!
I know this is 4 years old. But I’ve just tried like 10 ways to code my touchpad and this was the only technique that worked. Thanks man
You're welcome!
Man, this was helpful because my unit has no distinctive "learn" button, just a black and red one. The unit does not say what these are! Thankfully, your video has that in the keypad!! My keypad has the work one in there, too. Now it works. Thanks so much!
You sir are my idol. After fighting the not so correct instructions that came with the unit, following your instructions instead solved my problem. I am one happy camper!
Wow you’re the best! I watched so many videos until I came across yours,, now my garage door is working thanks to you!
Hey man, thanks for this video. I was banging my head for 10 minutes trying to figure out the instructions following them exactly nothing worked your video worked first try much appreciate it.
You are my hero! Was so frustrated following package directions that don't work! I followed your instructions and worked immediately! Thank you!!!!!
This was PERFECT! I've been struggling for 2 days with the terrible instructions on the keypad itself
thank you I bought the keypad today I followed the instructions and the door would open but would not close no mater what I did. I was going to take it back to lowes but I got on you tube and found your video now it opens and closes thank you aging!!!!
Thank you for your video. I was having problems programming a new keypad while following all the instructions which came with the keypad. When I followed your guide, it worked the first time. The difference was that in your video you indicated: "Enter and Hold the Enter Button until the light blinks", other instructions said, "Enter and Release the Enter Button" which is incorrect. Other TH-cam videos also had the incorrect instruction.
GOD BLES U SIR!! JUST DID THIS IN MINNESOTA. SAT. NIGHT. 5 4 204. WORKED GREAT. TAKE CARE.
Thank you so so much! I had been fighting with my keypad for a week and it’s only a year old! Your instructions are spot on!! Thanks again for saving my sanity… the sound of your voice played a big part too!!🤭🤭🤭😍😍😍👏🏾👏🏾👏🏾
Thanks!!! I was trying to fix for hours!! I appreciate ur video and having the correct instructions!! Needed to press 3 times. Just saved about $100 dollars!!!
I’ve watched several videos on programming the keypad. Yours is the ONLY one that worked. Thanks!
i hope this is true for me also.
even the offical company video for my model doesn't work.
Thanks, so much, I couldn’t get my code to work while trying to follow the instructions on the keypad for nearly an hour! I did it your way and it worked like a charm.
I just programmed the same exact opener and you are 100% correct. I used the instructions on the old keypad and it wouldn’t work but the new instructions, there are no problems.
Thanks you Sr. I was going crazy trying to program my remote following the in package instructions, I followed your instructions and like magic, I even set a second code for my second door, I even bought a newone, I'll return the one I bought tomorrow, thanks again.
Thank you so much! I have spent hours trying to program the keypad. Your instructions were clear and easy.
Thanks for sharing. Now my remote isn’t working. Do you have instructions for programming that?
Thank you for posting this video. I was following the instructions on the keypad, and was getting nowhere!!! The key for me was in the final step. 1.) Press the learn button on the garage door opener, 2.) put in the 4 digit code, 3.) HOLD the enter button until the garage door light flashed or I heard a click. Holding down the enter button was what caused the keypad to work. Thank you again for posting!!!!!!
Thank you so much for this video! I was panicking that my keypad would never work again. Thank you!!!
Thank you very much , it worked. I tried every single method couldn’t get it to work until I saw your post ! Many Thanks
Man, our house built 15 years ago and after following the directs provides to mo end, I thought it was just time to buy another keypad. But this worked like a charm!!!!!
Great video that worked for me. I tried a bunch of other videos but only this video actually worked. Thank you!
Thank you Sir. I have been messing with this for 6 months. You got it working. Thanks
Brah, I could NOT get this damn new keypad opener to work, your video kept me from stroking out 😂....nice simple directions. Thanks.
I have struggled for so long getting this to work. Your video was perfect. My purple button had faded to brown so that was an extra challenge. Thanks for doing the video!
Seems the correct step is to enter your 4 digit pin BEFORE pressing the learn button on the garage opener not AFTER. Other than this step being reversed, the instructions were almost the same. Thanks for taking the time to make this video, just did this today. Worked fine. Much appreciated.
Perfect instructions, once you find the correct ones. I needed to reset an existing PIN from the previous owners. Your screenshot of those instructions were spot on. Thank you for posting!!
Thank you Bro. I was stuck after so many times trying to program this stupid universal remote to liftmaster garage door opener. With your help I finally did.😊
Glad I could help
Thank you Sir! We move into a home and there were no instructions on how to change the code. I tried the online manual and other videos with no luck UNTIL I came across yours. THANK YOU!!
Thanks! This was very helpful! I also purchased a new keypad thinking my old one didn’t work: but, after following these instructions, this new one goes back!😂
Thank you boss!! You save me a lot of time I didn’t plan on using on trying to figure this out. Your so 100% right on everything
You just saved me at least another day freezing my butt off in the garage trying to figure out what's wrong with my 6 year old keypad. And at least a day's worth of arguing with the wife. Thank you, thank you, thank you.
Took a few tries but I was able to enter a new code since the previous owner had moved out.
So far so good! Great advice and well done video.
Thank you 🙏
darn straight. My button is orange, as stated on liftmaster...but button and the antenae are purple. So used your purple instuctions....and it worked!!! Thank dude.
Solution! Thank you so much! After trying for so long in different ways, this made it so easy and straight!
You have the best directions for resetting the garage door opener! Thank you!
Glad to help!
Genius, brilliant description, saved my day and money, thank you
Thank you very much. The manual did not provide instructions that worked; yours did!
Great easy video. Way better then the official company video. Did not even make it half way trough your video before I was done.
You rock dude! Thank you so much! I was getting nowhere with the old instructions. Saved me so much trouble.
Another new fan and subscriber here!!! I can’t overstate how frustrating the keypad instructions were and how great your video is!! Thank you so very much. 🙏🏽
Thanks for showing how to program a garage door opener, it was so easy for me! ☺️
Respect brother this worked right away [purple] was the real issue the whole time.
Great video dude. I have the same instructions but I was breaking the steps down according to the window panes in the instructions. So after putting in my PIN and the # I was waiting a second to enter once ( I have the yellow button). Now I Have to figure out how the LJ8900 signals that it's in learn mode.....YOur video made a ton of sense when you walked through it....
Omg thank you so much. I tried to program my wireless keypad so many times with no luck till your video. Thank you. It works now.
You are welcome. Help support my videos by pledging $1 per month - you can cancel your pledge at anytime www.patreon.com/weldingandstuff
Thank you! Search dozens of videos and yours did it! thank you!
Man I am glad I found this video! I have been trying to program this new remote and the instructions were not correct. Thanks
Do you know what you've saved me from? I brought in all kinds of experts and handymen to help me but none could figure this out. Your instructions were straight to the point and it worked. Thank you
after watching 100 videos this was the only one that worked!
This was the easiest way to get this set. Thank you!
Thank you for these correct instructions, it worked perfectly! Was frustrating that the instructions that came with the keypad failed for our dual keypad opener.
Thank you so much for this I was struggling hard trying to figure this out. You dropped your crown 👑 king.
My keypad had different instructions which I couldn’t figure out. Tired your way and changed it in 10mins. Thanks!
Thanks! I just did this and it works much better! I used to have to keep pressing enter a couple of times and it was a pain! Now it opens right away with pin and enter!
Thank you for this! It worked the first time, although I tried the other instructions about 10 times. Good stuff!
Glad it helped!
Hell yeah homie. I was having trouble but found your video, got it on the first go with you 🎉 😂 thank you!
My instructions were way off. Yours helped! Thank you so much!!! :)
Saved me from breaking it. Tried other videos and they didn't work. Glad this one did
Thank you so much !!! Finally, I got it right with you video instruction. Tried for 2 days as the original box instruction, and got so frustrated.
Thank you so much! I've been struggling with this new install keypad for months! You have a subscriber! 👍🏿
Thanks for the sub!
Thank you for this video!! None of the other instructions were working!
Glad I could help!
Thank you it actually work correctly. I can’t believe they printed the wrong instructions inside the cover. Super frustrating. I did your technique it worked fine
Thank you for this video. You nailed it... All others has the basic programming. This video solved our issue. Thank you.
Watched 2 other videos and this was the only one that got it to work. Thank you
Glad I could help