Keypad: geni.us/s4TX6S Tools Every Weekend Warrior Needs Makita Cordless Drill Combo Kit: geni.us/t7dIA Dewalt Drill Bit Set: geni.us/oFlSl Dewalt Screwdriver Bit Set: geni.us/VDcr Craftsman Screwdriver Set: geni.us/jXqFI Eklind Allen Wrench Set: geni.us/7XfvO Pliers (4-Piece Set): geni.us/RIdx Stanley Utility Knife: geni.us/ndIDa Stanley Tape Measure: geni.us/bUfD1R Studbuddy Stud Finder: geni.us/RySCuVw Johnson Torpedo Level: geni.us/wiLcDY Stanley Hammer: geni.us/bPDk8Wo Buck Bros Wood Chisel Set: geni.us/vk3cpTW Klein Voltage Tester: geni.us/h9Hl Klein Outlet Tester: geni.us/kdBAJ Ideal Wire Strippers: geni.us/MdOB Little Giant Ladder: geni.us/fmlmTk DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
Such a quick and easy way to set or change the keypad code. The official way is long and easy to screw up. Our keypad code had stopped working. The battery was fine. I rebooted the current code using this method and everything worked perfectly. Took less than a minute. Our wireless controller and built in car controller continued to work perfectly as before. Sometimes in the past they've needed resetting after resetting the keypad the official multistep way. Great video.
Quick and precise. Without a lot of hype, talking, or history lessons. Thank you. I was able to program the wireless keypad in just moments after watching.
I tried for hours to reprogram my garage door keypad using the directions that came with the keypad. Watched your video and used your very simple method and now it works. Thank you!!!
A tip from what happened to me. If a lot of vehicles and remotes may have been programmed to operate your door, you may have maxed out the programming. I kept trying to program my vehicle and then my wife's, and one of them would always not work. I then held in the learn button for 10 seconds until the light went out and erased all codes, started over, then programmed 2 vehicles and a hand held remote with no problems.
I followed the instructions that came with my new keypad to the Tee! 4 different steps nothing worked. Only 2 steps with this guy everything worked on the first try!! Outstanding!
I had been following the instructions on the keypad with NO luck. Followed your instruction and it worked like a charm...without all the extra steps. Thank you so much!!
Move into a new home in Febr...it's now August. I have been after my husband to program the garage door. Thank you Scott for this simple video. Now I can open my garage door using the keyless entry. Now I have to decide whether to tell my hubby about it or not.
Did not think this would work with my very old Barcol opener and old Security+ pin pad. I found the square yellow learn button and a little light came on after I pushed it. Went to the pin pad, put in the new code, held Enter and the light on the opener flashed off and on. Pressed Enter and the door closed. Magic. 🎉Thank you very much.
Agree 100% Concise and to the point, Separate videos for other options so you don't have to wade through the entire video to find your particular need.
I’ve had an issue with this thing for over a year! Your simple step by step video helped me to feel like a boss DIY-er (even though the skill difficulty level was like 0 or 1 out of 10)!! Ha!!! Thanks again!!!
This totally fixed my keypad issue. I changed the battery but still didn't work. I think the old code keys weren't functioning anymore. Totally worked with a new code. Thanks for saving me the money!
Thanks for posting the video; much better than the owner's manual. The only tricky part for me was finding the learn button. On my unit instead of it being a small square purple or green button it was a small yellow circular button which I finally figured out
Thank you thank you thank you! My garage opener stopped working a few days ago. I followed your video on reprogramming it and it works now! So simple and easy to do all thanks to you
This was an absolutely superb video. I can't believe that I actually was able to reprogram the number on the keypad using your wonderful instructions. This was very helpful! You are the best!
Thank you !... Nowhere in chamberlain instructions they talk about 30 sec limitation. Your video helped me a lot .... You should charge consulting charges to Chamberlain ! Thank you very much
My old garage door opener bit the dust. Went to Home Depot an purchased a new one. I called around to a few Garage Door companies to see what it would cost to install a "3rd party opener", as they call it. Every place wanted 250.00. I guess these guys have their PhD in Garage Door Repair. So......... Between another video for installation, a video for testing and troubleshooting, and your video for programming the keypad, it was fairly easy and I saved a bunch of money from the overpriced greedy installers.. Thank you.
Thank you So much! when i bought this house i realized the owners never told me the garage door code. I emailed the sellers agent and he sent back a rude message I can't post here! You saved me much anxiety and money.
Keypad had worn out on one or more numbers. Great, easy way to reprogram. As door was closed, I took controller off wall and put it at the top of the ladder, while pushing the learn button. No sprint around to the front of the door :-)
Thanks for doing this video. It helped me reprogram my garage door keypad. I’m not sure why it stopped responding but thanks to this video it’s all hood now! 😁
What would happen if on the side where it’s supposed to blink the light doesn’t work. I tried putting a new lightbulb, but it doesn’t work. I think that part may be broken. What do you think?
I don't want an outside keypad. But I'd like to open my garage doors from my phone. Is there a dongle to put inside that will trigger garage doors? Also I have an extremely old opener in one door so a solution that triggers the "MANUAL" open/close buttons are what I'm looking for.
Can you put a video about reprogramming your remote control after replacing batteries? For some reason, I can't find Chamberlain information oy my model that looks similar to yours (CLLA1T)
Thanks for the clear explanation, before I see this video I tried to change the pin code, but now the new code closes the door, and neither one opens it (old code, new code). Would you please guide me how to fix it. Thanks in advance!
Keypad: geni.us/s4TX6S
Tools Every Weekend Warrior Needs
Makita Cordless Drill Combo Kit: geni.us/t7dIA
Dewalt Drill Bit Set: geni.us/oFlSl
Dewalt Screwdriver Bit Set: geni.us/VDcr
Craftsman Screwdriver Set: geni.us/jXqFI
Eklind Allen Wrench Set: geni.us/7XfvO
Pliers (4-Piece Set): geni.us/RIdx
Stanley Utility Knife: geni.us/ndIDa
Stanley Tape Measure: geni.us/bUfD1R
Studbuddy Stud Finder: geni.us/RySCuVw
Johnson Torpedo Level: geni.us/wiLcDY
Stanley Hammer: geni.us/bPDk8Wo
Buck Bros Wood Chisel Set: geni.us/vk3cpTW
Klein Voltage Tester: geni.us/h9Hl
Klein Outlet Tester: geni.us/kdBAJ
Ideal Wire Strippers: geni.us/MdOB
Little Giant Ladder: geni.us/fmlmTk
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
Such a quick and easy way to set or change the keypad code. The official way is long and easy to screw up. Our keypad code had stopped working. The battery was fine. I rebooted the current code using this method and everything worked perfectly. Took less than a minute. Our wireless controller and built in car controller continued to work perfectly as before. Sometimes in the past they've needed resetting after resetting the keypad the official multistep way. Great video.
Quick and precise. Without a lot of hype, talking, or history lessons. Thank you. I was able to program the wireless keypad in just moments after watching.
why can't youtubers be like you? short, on point and clear! Thank you.
Amen!! 👍
I tried for hours to reprogram my garage door keypad using the directions that came with the keypad. Watched your video and used your very simple method and now it works. Thank you!!!
A one-minute solution to the problem. All tutorial videos should be this focused. Thank you!
A tip from what happened to me. If a lot of vehicles and remotes may have been programmed to operate your door, you may have maxed out the programming. I kept trying to program my vehicle and then my wife's, and one of them would always not work. I then held in the learn button for 10 seconds until the light went out and erased all codes, started over, then programmed 2 vehicles and a hand held remote with no problems.
I followed the instructions that came with my new keypad to the Tee! 4 different steps nothing worked. Only 2 steps with this guy everything worked on the first try!! Outstanding!
Will not close without the pin...any suggestions 😮
Thanks Scott,your info is always clear and concise.
I had been following the instructions on the keypad with NO luck. Followed your instruction and it worked like a charm...without all the extra steps. Thank you so much!!
Yeah the instructions are WRONG. This video was great.
Thanks. Simple, straight forward, and WORKS!!! The replacement keypad directions were garbage.
Move into a new home in Febr...it's now August. I have been after my husband to program the garage door. Thank you Scott for this simple video. Now I can open my garage door using the keyless entry. Now I have to decide whether to tell my hubby about it or not.
Don't lmao, he'll think you're a witch.
Thank you super simple was able to do this task in less then 60 seconds after watching your video
Did not think this would work with my very old Barcol opener and old Security+ pin pad. I found the square yellow learn button and a little light came on after I pushed it. Went to the pin pad, put in the new code, held Enter and the light on the opener flashed off and on. Pressed Enter and the door closed. Magic. 🎉Thank you very much.
How could anybody not like this video. It took all of a minute to do!!! Thanks
I kno what u mean..read manual and attempted to reprogram a dozen times..no sucess..seen u video one time..keypad works like a charm..thanks a bunch
😂
Agree 100% Concise and to the point, Separate videos for other options so you don't have to wade through the entire video to find your particular need.
Thanks for the feedback!
I’ve had an issue with this thing for over a year! Your simple step by step video helped me to feel like a boss DIY-er (even though the skill difficulty level was like 0 or 1 out of 10)!! Ha!!! Thanks again!!!
You are a life saver my friend! How easily you explained! After I saw your video, it took me few mins to reset the code.
Thanks !
Watching the video, programming, shutting and reopening the door and then closing the light cover took under two minutes!
This totally fixed my keypad issue. I changed the battery but still didn't work. I think the old code keys weren't functioning anymore. Totally worked with a new code. Thanks for saving me the money!
Thanks for posting the video; much better than the owner's manual. The only tricky part for me was finding the learn button. On my unit instead of it being a small square purple or green button it was a small yellow circular button which I finally figured out
Thank you thank you thank you! My garage opener stopped working a few days ago. I followed your video on reprogramming it and it works now! So simple and easy to do all thanks to you
Thank you. I don't know what it is about your video but I watched it once and you taught me. It works...
This was an absolutely superb video. I can't believe that I actually was able to reprogram the number on the keypad using your wonderful instructions. This was very helpful! You are the best!
Thank you and great job on your videos. Straight to the point and no endless yapping like the others!!!!
Thank you !... Nowhere in chamberlain instructions they talk about 30 sec limitation. Your video helped me a lot .... You should charge consulting charges to Chamberlain ! Thank you very much
Thank you sooooo much!! My garage door didn't work, and I tried it many times. But I could reset my pin number thanks to your video. Thank you again!!
Your videos are so simple and clear, your cross-references to Amazon very helpful! Keep up the great work!
Thanks Willy, appreciate the kind words 👍
Great job describing in this video how to reprogram the remote. This along with your other video on troubleshooting helped me out.
Thank you!
Really helpful. You saved my day after trying a lot of times. Regretting not see this video before doing
Best tutorial on TH-cam. Straight to the point.
Thanks for the feedback!
Concise and right to the point. Exactly what I needed to reprogram my keypad. Great job!
Really appreciate how quick and succinct the video is!
Thanks. Mine is not labeled as a “learn” button but seeing how you did it was very helpful. Thanks!
Dude, I bought a house and couldn't figure this out until I found your video. Kudos to you my man.
Perfect! Short, concise, easy. Thank you!
This has to be the first video that worked and that was easy thank you
Spot on with the overuse of the numbers being the problem. Terrific sharing of information! Thanks so much!!!
Thank you very much. Your videos really assisted me with addressing numbers that stopped working.
Thank you, your explanation was clear and worked like a charm! 😊
Happy to help!
Simple, clear and effective. Thank you
Thanks. Solved. Took less than a minute between watching the vid and doing it.
Great, simple video!
My old garage door opener bit the dust. Went to Home Depot an purchased a new one. I called around to a few Garage Door companies to see what it would cost to install a "3rd party opener", as they call it. Every place wanted 250.00. I guess these guys have their PhD in Garage Door Repair. So......... Between another video for installation, a video for testing and troubleshooting, and your video for programming the keypad, it was fairly easy and I saved a bunch of money from the overpriced greedy installers.. Thank you.
Thanks for a short, clear video. Very appreciated.
You bet!
Thank you So much! when i bought this house i realized the owners never told me the garage door code. I emailed the sellers agent and he sent back a rude message I can't post here! You saved me much anxiety and money.
Very easy and straightforward! Thanks for posting. Worked like a charm!
Keypad had worn out on one or more numbers. Great, easy way to reprogram. As door was closed, I took controller off wall and put it at the top of the ladder, while pushing the learn button. No sprint around to the front of the door :-)
Thank you! I watched a few others but this is the best one!
Wow. Thank you. Simple and Easy
Hey like the commentary I'm resetting password it was totally easy God bless.
Thanks for the video as a previous one found on YT didn’t work 👍
changing the code to numbers not used previously worked - the keypad buttons from previous code were worn out on the pad, thanks very much!
Worked like a charm
Thank you man you’re a life saver
Thank you so much for your tutorial
Great job! Quick and to the point.
Thanks for doing this video. It helped me reprogram my garage door keypad. I’m not sure why it stopped responding but thanks to this video it’s all hood now! 😁
Thanks!
Nice quick and precise!
thank you. Our key pad just needed to be re-programed and it worked!! Thank you
Quick and to the point. Tanks....
Happy to help!
Quick. To the point. Thanks! Looks like my 'Enter' key is worn out. Will probably need to replace the keypad
Great and to the point. Thanks. Subscribed.
Worked great. Thank you for the help.
Thanks I just did mine because of you
Excellent, it worked. Thanks for sharing it.
Thank you! This solved the problem.
Happy to help!
Sweet. Worked 1st try. Thanks
Worked for me, thanks!
worn out button trick worked! thanks
fantastic upload Everyday Home Repairs. I killed that thumbs up on your video. Continue to keep up the great work.
Scott - Tks for your video. One question, do I have to do anything with my remote, or will it work with the new code.
You're awesome! Problem fixed. Thank you!
Thanks so much, works like a charm.
What would happen if on the side where it’s supposed to blink the light doesn’t work. I tried putting a new lightbulb, but it doesn’t work. I think that part may be broken.
What do you think?
This is the most simplest video
works beautifully
Excellent videos! Thanks!
I don't want an outside keypad. But I'd like to open my garage doors from my phone. Is there a dongle to put inside that will trigger garage doors?
Also I have an extremely old opener in one door so a solution that triggers the "MANUAL" open/close buttons are what I'm looking for.
Can you put a video about reprogramming your remote control after replacing batteries? For some reason, I can't find Chamberlain information oy my model that looks similar to yours (CLLA1T)
It worked!!!! Thank you.
Thank you so much!!! That was a big help!!
Thanks for the clear explanation, before I see this video I tried to change the pin code, but now the new code closes the door, and neither one opens it (old code, new code). Would you please guide me how to fix it.
Thanks in advance!
Fantastic. Thank you so much
Thank you, it worked great 👍
You're welcome!
Definitely helpful video.Thanks man
Thank you for this video. What a cost saver! It worked. However my 2 garage door remotewon't open the garage door anymore. Do I have to buy a new?
super easy, thank you
Thanks! It worked!👏🏽👏🏽
Useful and to the point
Great help! Will the battery going dead or being removed erase the code? Thanks!
That was quick! Thank you!
Thank you! I can enter the code to your house now lol xD.
😱
Lol
If you have two different garage doors, can you program the keyboard to do both of them with separate key codes?
Can you have 2 keypads for the same door? I want to raise my door from 2 different areas of the garage.
Can you use this for 2 garage doors with different codes????
Thank you! 🙏🏻
Does this reset to the new code only so that previous codes are removed?
Just followed your steps, the new code works but so does the older ones, how do I remove/delete them? Thanks