Many thanks for taking the time to show how to do this. I am getting a bit fed up printing other peoples work and thought id try to make my own ! Great help :)
Hi! I was the one who asked for tips regarding how to make this vase. I just want to say thank you so much for the tutorial! As a beginner using Blender, I truly appreciate the details going into the basic elements e.g. changing units, exporting with applying modifiers, etc. I simply cant thank you enough! I hope you keep doing more blender tutorials :)
Thanks. I'm glad you enjoyed my tutorial. I do plan on making more Blender tutorials in the future. Right now, I only have one other blender tutorial, which you may have already seen, but I will put a link here in case you're interested. th-cam.com/video/cr6LFD7y_zw/w-d-xo.html
Great video! Radius is correct btw. It's measured from the center of a circle to the outer edge. In that sense 2 radiuses equals the full width of the circle, effectively being two halves
another way to reset your scale you can type Ctrl+A and the 3rd option down is Scale - if you use keyboard commands often (which you absolutely should in Blender), it becomes a habit to regularly rescale your models
My first thought is that your merge distance is too high. There is a little arrow next to the word merge. Click it to see the merge distance. It should be a very small number. My default value is 0.01. For this project, you could use an even smaller number, like 0.001 since we are basically removing duplicate verts. If it still gives you problems, try leaving merge unchecked, and I think the whole issue of merging will take care of itself when I have you merge by distance after applying the array and simple deform modifiers (in other words, I think I could have completely skipped the whole thing about activating merge in the array modifier...but I didn't realize it when I made the video). Let me know if that helps.
Hi, if you are talking about selecting the ring of faces at 19:48, make sure you are in face-select mode and try double-clicking on an edge between two faces. If that doesn't help, let me know, or if you are talking about a different time stamp, let me know the time stamp and I will try to help.
Hi. I'm sorry it's giving you problems. The first thing I would try is going into edit mode, press A, M, B. Then press Shift-N. This will make sure there are no duplicate vertices and that your normals are correct. Then try ctrl-R again. If it still doesn't work, you can contact me outside of youtube (just let me know you're the person from youtube who couldn't use ctrl-R on the vase). th-cam.com/video/bhadwrxAF0c/w-d-xo.html
Hi. I've never heard of that problem. You can send me the file and I will take a look at it for you. Here is a video about how to contact me outside of TH-cam.
I had the same issue, I read that by pressing Ctrl+Alt and clicking the face or the edge, it will select the chain of elements next to the one you are clicking. Hope it helps :)
Many thanks for taking the time to show how to do this. I am getting a bit fed up printing other peoples work and thought id try to make my own ! Great help :)
Hi! I was the one who asked for tips regarding how to make this vase. I just want to say thank you so much for the tutorial! As a beginner using Blender, I truly appreciate the details going into the basic elements e.g. changing units, exporting with applying modifiers, etc. I simply cant thank you enough! I hope you keep doing more blender tutorials :)
I'm glad it was helpful. And thanks for the encouraging words.
You are amazing for explaining everything in details. I would love to see more such videos where I can learn more about blender
Thanks. I'm glad you enjoyed my tutorial. I do plan on making more Blender tutorials in the future. Right now, I only have one other blender tutorial, which you may have already seen, but I will put a link here in case you're interested.
th-cam.com/video/cr6LFD7y_zw/w-d-xo.html
Great video! Radius is correct btw. It's measured from the center of a circle to the outer edge. In that sense 2 radiuses equals the full width of the circle, effectively being two halves
El mejor tutorial por lejos de todos! Mil gracias
Gracias. Es muy amable.
Thanks for sharing how to modeling in blender
Superb! I guess I learned something from this. Where were you when I needed to understand lattices and deformations?! :)
Thank you. I'm glad you liked it!
Thank you for share. Very careful teaching 🎉 12:21
Thanks for watching!
another way to reset your scale you can type Ctrl+A and the 3rd option down is Scale - if you use keyboard commands often (which you absolutely should in Blender), it becomes a habit to regularly rescale your models
Ctrl-A, scale is what I normally do. Did I do something different in this video? (I can't remember, it's been awhile since I uploaded this).
Tnx❤
While merging the array ,it’s getting deformed, can’t figure out what can be the issue.
My first thought is that your merge distance is too high. There is a little arrow next to the word merge. Click it to see the merge distance. It should be a very small number. My default value is 0.01. For this project, you could use an even smaller number, like 0.001 since we are basically removing duplicate verts.
If it still gives you problems, try leaving merge unchecked, and I think the whole issue of merging will take care of itself when I have you merge by distance after applying the array and simple deform modifiers (in other words, I think I could have completely skipped the whole thing about activating merge in the array modifier...but I didn't realize it when I made the video). Let me know if that helps.
I had this problem, I rotated my object 90 degrees in edit mode. then it worked.
I need some help: When I double click, it doesnt select the whole edge ring at same time, just one edge
Hi, if you are talking about selecting the ring of faces at 19:48, make sure you are in face-select mode and try double-clicking on an edge between two faces. If that doesn't help, let me know, or if you are talking about a different time stamp, let me know the time stamp and I will try to help.
@@webduncetv Yes! I've made it! Thank you very much!!
I can't seem to be able to add the edge loops in, when i press ctrl + R it wants to insert them for 1 ridge.
Hi. I'm sorry it's giving you problems. The first thing I would try is going into edit mode, press A, M, B. Then press Shift-N. This will make sure there are no duplicate vertices and that your normals are correct. Then try ctrl-R again. If it still doesn't work, you can contact me outside of youtube (just let me know you're the person from youtube who couldn't use ctrl-R on the vase). th-cam.com/video/bhadwrxAF0c/w-d-xo.html
Hello! I started from scratch again, and it worked. So I probably missed a step somewhere🤷♂️. Thanks for your reply!
No problem. I'm glad you got it working. :)
I am not able to select the edges at 8:17. Can someone please help?
Hi. I've never heard of that problem. You can send me the file and I will take a look at it for you. Here is a video about how to contact me outside of TH-cam.
I had the same issue, I read that by pressing Ctrl+Alt and clicking the face or the edge, it will select the chain of elements next to the one you are clicking. Hope it helps :)
Hi, I had the same issue. I had to go into Edit > Preferences > Input > then check the box for "Emulate 3 Button Mouse'' then the double click worked.
@@Sydney-oz6xo i love you so much thanks