How to skirt Mobile Home (Vinyl Skirting)
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- This will walk you through the steps on how to skirt a mobile home.
Music Used
"
Track: Midnight - Declan DP [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Midnight - Declan...
Free Download / Stream: alplus.io/midn...
Music: Run Free by Hotham is licensed under a Creative Commons License.
creativecommon....
Stream: linktr.ee/hoth...
Free Download: hypeddit.com/h...
Support by RFM - NCM: bit.ly/405dI6N
Music: Odyssey by JIGLR is licensed under a Creative Commons License.
creativecommon....
Support by RFM - NCM: bit.ly/3fPSvfI
Music: Sunset Beach by Bryo is licensed under a Creative Commons License.
creativecommon....
Support by RFM - NCM: bit.ly/43Z0knR
"
Please leaves comments on how to improve!
Great video. Not that many videos on TH-cam about the mobile setup process. Looking forward to see more of your videos
Very great workmanship. Tell me about the top clips, do the clips come with the kit? I bought a 14x70 kit last week, it'll be at my mobile home this Wednesday. It's my first rodeo, the job looks fairly easy to me using common sense and knowledge. Any tips or tricks for me. Thank you
Great video helping me to understand. Cutting corners times of the weather different ways to appy explained all my questions away thanks a million
Thank you! Very helpful!
I would put two by four on three the ground then screw the plastic
Thanks for the advice and video!
Thanks for sharing your knowledge.
Great video! I have some issues with the entire top rail no longer being attached so the underpinning flops out with it in the wind...it looks like they never screwed it in at all??
Excellent
Looks good thank you!!
Great video
The music has to go. I can't watch this there's no need for the loud music or any kind of music distractions that's what it is get rid of the music
DITTO
awesome job thank you
where do you buy the outriggers? do they come with the skirting? Great work by the way!
that underbelly fabric has seen better days, it can be patched to keep the rodents out.
How do you set the top rail if there is stone. My home has 2 stone sections on either side of the front entrance that there isnt any room to put the top rail. I cant get anybody local to come look. Please help
I don’t mean to sound negative but the underbelly should have been repaired, the junk wood etc should have been pulled out and it is not rodent proof which should be the first concern of any mobile home. This work is only cosmetic. I understand if the homeowner doesn’t want it done right but to me this is a waste of money!
So do the corners first? And then tie the others in? Cool!
How long will it last after the yard crew go around it with a weedeater running 4 strings of 105 diameter. Has a customer called back because it got tore to shreds? If so, I'm wandering how you handle that situation. Please respond, I'm very curious. Also, do you offer the option of rodent proofing while installing the vinyl underpinning?
I do mobile home skirting for a living. It depends on what material you use. If you use the cheaper flemsy vinyl skirting that's just a risk that's going to happen. That stuff chips super easily. I always recommend to my customers the Titan Xterior Prime Panels. They are resistant to weed eater chipping. It's not quite double the cost, but it's worth it and looks much better.
my place in is on a slab and so is the skirting. the bottom skirting track is screwed to strapping and the strapping is nailed to the slab, i recently had to redo it as the wood was rotting and the nails were rusting. this was on a double wide. now if i wasnt on a slab i would use the spike right on the ground like your doing.
Could always drill and tap🤷🏼♂️
Great job guys I was gonna frame it then put skirting over mine not sure what to do but yours looks sweet maybe alittle cheaper too since everything is over priced now who’s the Assholes who started that shit ?
Put new insulation while the house is exposeed
So you didn`t install perf panels for venting? No access doors either? Those alone are code violation`s.
No wonder it rotted out the underneath the home, previous knucklehead did the same thing you just did.
It's not necessarily a code violation, but by the book you're supposed to vent every 150sq ft. I usually do 6 vents on a single wide (3 on each side) and 8-10 on a double wide depending on the size. Always two in front and two in back and up to 3 on each side.
Trailer doesn't look strapped down
Some of the easiest money ever to be made in life right there!
The spouse and I could do a double wide in 2 hours back in the late 90’s early 2000’s and charged $400 labor.
It is also the most nothing of something you have ever seen. Most places around me won’t even allow it now.
Tip: don’t be hitting it with a weedeater. Ever! Especially after it see’s one summer already. Js
Oh, you are supposed to take another spike , put it on the head of the spike you pushed in, and finish driving the spikes all the way into the ground, where the head of spike can meet the track. Hammer it down. Smh. Looks like those were left up as far as ya thumb could meet it. Leaving them up a half inch or more. JS.
Let ‘er rip.
Possibly unpopular opinion. Vinyl sucks it deteriorates rapidly and it’s just ugly. Corrugated metal is a far superior option.
how much to charge for a job like this?
Depends on location, but I charge anywhere from $500 to $1000 labor. Travel, size of home, and if I have to tear down old skirting or not.
Where do you find the out riggers
How long will the vinyl last?
Depends on which type of vinyl skirting you use. It all requires maintenance that most people overlook. Titan Xterior Prime Panels are what I recommend to my customers. They are weed eater resistant. And they also come in an insulated version.
Are you going to leave that garbage under the jhouse
Half-assed job
vinyl skirting will break down don't use it