How to Remove & Replace 2018-2020 F150 Taillights & Bulbs
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2021
- 2018-2020 F150 Tail Lights & Tail Light Upgrades - www.stage3motorsports.com/201...
2015-2020 F150 Morimoto XB LED Taillights (Smoked) LF431 - www.stage3motorsports.com/lf4...
2015-2020 F150 AlphaRex Red Smoked LED Taillights 652020 - www.stage3motorsports.com/652...
2018-2020 F150 Lighting Parts & Upgrades - www.stage3motorsports.com/201...
2018-2020 F150 Lighting Upgrades & Lighting Accessories - www.stage3motorsports.com/201...
_____________________________________________________________________________________
SUBSCRIBE AND FOLLOW
YT Subscribe : / @stage3motorsports
FB: / stage3motorsportscom
IG: / stage3motorsports
Webiste: www.stage3motorsports.com/
Enter Stage 3’s latest giveaway: www.stage3motorsports.com/Giv...
Never miss a thing when you join the Stage 3 Newsletter: www.stage3motorsports.com/Sta...
Grab a Tee Shirt or Sticker - www.stage3motorsports.com/Sta... - ยานยนต์และพาหนะ
Dealership wanted $659 to do this. You saved me $626 + hours. Thanks.
Ridiculous. Freakin stealerships.
Of everything I have done on my F150. This has been the easiest. Thank you sir!
Thank you! As a single mom who does DYI as much as I can to save money, these videos are a lifesaver!
Ford wanted over $350 to replace the entire light assembly. I bought one on amazon for $150, watched this video, and done. Saved myself $200 for less than 5 minutes work.
Common sense
My F150 has the notorious condensation tail light, pooling cold water popped the bulb when it got too hot and I couldn't figure out how to get the taillight off. One of the comments mentioned an additional tab at the top opposite the two mentioned in this video and was so much easier to remove once I was aware of that!
Thank you for the video and to the commentor that mentioned the extra tab!
Clean, simple and eloquent presentation. Thank you.
Thank you so much for this video when I’m doing work on my truck my dad used to be right there coaching me telling me that I needed to do it myself so I can learn how to take care of my own truck. My dad has since passed away, so this video was a lifesaver thank you so much!
Thank you so much for this video. I was so worried I was going to have to go to the dealership and pay a lot of money that I don’t have right now to get this done. I’m now going to do it myself. You have no idea how much this helped me!! God Bless
Not only do you have the same color as I do, but the insert did exactly as yours. Thanks for the instruction 👍
Thank you. That was perfect. And you were right about that top rubber holder coming off with the disassembly. Caught that, put it back in. Easy peasy. Thank you from all of us that get intimidated by these things.
Great explanation. Simple, concise, and complete. Did everything just as you explained and got it done. Thank you!!
Great video, thank you! Like the detailed and specific notations of quirky things that could happen or to be aware of, etc. Also, quick and concise, which is nice. Will watch for more of your videos. Great work!
Thank you for a quick and informative video to show me how to do it. Much appreciated
very simple instructions. well done.
I thank You guys so much for helping us with our do it ourself projects. Very helpful video.
Perfect video. Saves me a ton of money and time and everything worked exactly the way you described. Thank you.
That was a perfect video. It went exactly like you said it would go. Thank you so much.
well done. helpful, instructive and to the point.
Well done. Answers all question.
Nice video, however you may have missed one point. On my 2019 F-150, there is also a locator pin on the top corner of the housing near the tailgate. It may not matter since the top bolt is in close proximity to the pin, but it is there and would be better if not broken.
Again, nice video. Thanks for sharing.
Simple fix, thanks!
Thank you. Made it an easy 5 minute change. Also like to add, ~30 dollars for light from Amazon.
Great, just what I needed....
Just did this….
Small trick if your “inserts” are being stubborn
I snaked a small diameter rope in the gap for some leverage and pulled straight back. Mine was stuck pretty good.
Great video 👍🏽
Thanks, good video.
Very helpful. Thx.
Thanks for telling me the bulb number and showing me how to replace them.
Anyone know of the factory halogen 2018+ will plug and play on a 2016 with halogens? Just like the look of them better than the 15-17 tail lights
What is the plastic thing called that is stuck on the peg? I'm trying to find a new one for my truck and I can't find out what they're called.
Thank you for mentioning the issue with the tabs. Unfortunately you didn't give a solution for that to tabs tendency of simply snapping off instead of coming out.
NOTE: we have a 2019 and thought the housing was just being supremely stubborn. Turns there is an extra insert pin at the top and opposite the other two. I used a plastic chisel between the light housing and main body to pry away slowly. Hope this is helpful to others!
Exactly! I started with the passenger side and I was like wtf is going on. I peeked in and seen that extra pin. Got one of those plastic remover tools and popped it out like butter
Thanks for this! I figured something else had to be done. I was afraid the housing would break.
I used a lighter to soften the top pin so
I could straighten it
I had a clip fall off does anyone know where it goes or what it is?????????
Would have liked to see a before and after in the dark. Thanks
The bulbs I put in are still stock bulbs, so the before and after would actually look identical in this case. We do have some other videos of LED bulb swaps that may be closer to what you're looking for. Thanks for watching!
If your F150 has Blind Spot detection (BLISS) the tail light does not look anything like the one in this video.
Have LED no problems so far.😳
Did you guys have a bigger gap between the body and top of the taillight at the first push pin? I did same with mine and the gap is by far bigger than stock. My buddy did the same thing and also got the gap? It functions as it should but the fitment looks like crap now
I haven't had this issue on our truck so I'm not sure what the exact problem would be. You may have already tried this, but loosen the two side screws slightly, then push the light back to close the gap. Once it's in place, hold the light steady while you tighten the screws down. There is some play in those screw holes that could be causing a problem.
@@NoahStage3 yeah I’ve tried everything. It’s just something with too much place that’s causing it.
I have the same gap your talking about but only on my right Tail light. Sucks because its been raining lately and water makes its way in there
Before you push the two pins in all the way, there is also a plastic locator at the top nearest you that needs to be in proper position.
Actually it's 8mm if u don't have one 5/16 will work
Don't be dumb
Looks simple enough, but of course as usual, mine has to be stubborn as heck and won't budge. 2019.