Sherpa Filament Break Sensor installation tutorial video
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2023
- Applicable models: VORON2.4, Trident
Matching extruder: Sherpa extruder
Function:
1)Automatic feeding
2)With material return function
3) With material breaking detection function
4) Light status display, different lights show the status of the filament
Precautions:
1) When the temperature of the hot end is higher than 170°C, press the eject button, and the extruder will immediately start ejecting the material
2) After withdrawing the filament, it is necessary to wait for the temperature to drop below 170°C (or the temperature set by the user in the system) before inserting the filament. If the filament is inserted above 170°C, there will be an immediate feeding situation and a freeze .
3) When the feed temperature reaches the set temperature, it may happen that the feed will not be fed immediately. It is necessary to wait for the temperature to stabilize before starting to feed.
STL link:www.thingiverse.com/thing:598...
Sensor configuration file OrbiterSensorV2.2.cfg link:www.orbiterprojects.com/downl... - วิทยาศาสตร์และเทคโนโลยี
Please make a tutorial on the updated R1 Voron 0.2 Pro, how to install the new catalyst, and the new hotend pcb
OK, already doing it, don't worry
@@fysetc4882 When will it be out?