Bose QuietComfort QC35 QC35II QC45 Power Button Switch Replacement | Repair Tutorial
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Are you a repair ninja? Buy the parts here 👉 bit.ly/3tJVQjg
Purchase tools 🧰 used in this repair here 👉 bit.ly/2VjnjLB
Steps to fix your device.
1. Remove the Right ear pad
2. Remove the Right ear pad mesh
3. Unscrew the 3 + screws
4. Flip the headphones over
5. Pry up the outside panel
6. Remove the plastic power switch
7. Use your solder and heat gun to remove the old/broken power switch
8. Put on the new power switch
9. Put the unit back together
10. Get back to jamming out 🎵
Follow us on our social media for more repair content:
Instagram 📸 - / joesge
Facebook - / joesge
Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
Hello All,
We, unfortunately, do not repair these headphones any longer. We do still offer the parts and tools to do the repairs though. Here are the links for the parts and tools for these repairs.
Parts: bit.ly/3ivWxvy
Tools: bit.ly/2VjnjLB
After watching this, as great as it is I decided I was going to pay for a repair so I went to the Bose website and opened a repair case. Wouldn't you believe it - my several years old QC35 was still covered by warranty and a few days ago my brand new free replacement QC45 arrived - yes, not only a free repair but a free upgrade!
After reading this comment i looked at bose's website too - got the same! Thank you so much for posting this comment.
Thank you! I’ve just found out that mine are also covered under this “warranty” and they’ve emailed me a prepaid label to send my QC 35s back for a pair of 45s! I literally only searched for this video because I noticed my 35s sitting on a shelf gathering dust and thought I’d finally look up a guide on how to fix it myself. Bose quoted me around £200 a few years ago when I asked them about getting them fixed out of warranty. This has made my evening honestly.
Thank you for posting this comment. I had been in contact with Bose two years ago and they had asked £250 at the time to repair them. They were pretty insistent too that I buy the new model instead. I saw this comment and went to book my repair and lo and behold I am now eligible for replacement. Pretty happy that I found this video and your comment!
Just done the same on the bose website. Ans been offered the qc45 free. Just need to sort posting my old ones back to them.
when I read this I called Bose and they refused a free replacement. They wanted $200 to replace it.
The power switch on mine is broken. It alternates between bluetooth connecting and power off. I was debating on buying a new pair, but now that you guys came out with the video i'm totally checking your site out and fixing my headphones :)
Awesome. Contact us if you need any more help. We are happy you could save your headphones.
Thought I completely botched the black and white soldering. It wasn’t pretty but they’re on and sounding good. Hopefully gets me a few extra months of listening. Great tutorial, and y’all delivered parts quick.
Happy to help. Thanks for watching. Please like and subscribe for more content like this!
Botched mine too, pretty sure lost a few contacts in removing the old switch, still works though with the new switch somehow
thank you for this video, it helped me solve my bluetooth button issue!
Hello, you're very welcome. Thank you for the comment. Please like and subscribe for more content like this 😊
Great guidance. I was able to fix mine...
Happy to help. Thanks for watching. Please like and subscribe for more content like this!
Great tutorial, thanks!
Happy to help. Thanks for watching. Please like and subscribe for more content like this!
> Use your solder and heat gun to remove the old/broken power switch
Wait, whaaaaa? I need a solder gun?
You need solder gun,must!!!
Fantastic Tutorial, but not for someone new at soldering. The soldering points are minute. I found it easier to clip the legs of the old switch and then removed them one by one by desoldering. It was easier than removing the entire switch in one go. Thanks for this. 🙏
Hello, you're very welcome. Thank you for the comment. Please like and subscribe for more content like this 😊
how did you desoldering one by one? I tried with a heat gun but I only melted the switch, this is very difficult to a someone new at soldering
Thanks
Hello, you're very welcome. Thank you for the comment. Please like and subscribe for more content like this 😊
i fixed it by opening it and spraying WD-40 on switch mechanism and blowing air on it.... and its working perfectly fine.
Interesting way to fix it 😂
I also fix everything like that
Thanks for the guide! I just replaced my broken power switch (it kept switching to bluetooth pairing) and reassembled everything but now the noise cancelling is juuuust slightly uneven left vs right which is driving me crazy lol, maybe the seal around the ANC microphone isn't quite as tight as it was. Have you ever experienced that?
Could be that your seal is not sitting flush
Hello Joe, do you have a tutorial for repairing the right button flex for Bose QuietComfort 45 QC45? I didn't want to fiddle around too much with the components, without knowing how to put it back together. thank you!
Hello, thanks for commenting. Please email us at support@joesge.com with your question. We will be able to better assist you there. - JoesGE
thanks for the video. Managed to replace the switch, but when soldering the red&copper wires, i've overdone the negative one and there's no solder anymore on the board, guessing the board is fried now?
You may be able to reply it, but if you pulled the contact point off the board then yeah its fried.
What is the brand name of the desktop vise you are using? Looks fairly sturdy.
www.amazon.com/Hakko-C1390C-Omnivise-PCB-Holder/dp/B00IX2H050
mine have a weird problem. The white light stays on very brightly. It seems to power off correctly (makes the noise) but this light stays on after it's powered down. Then, it loses charge quickly. I tried spraying the power switch but nothing changed.
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
Did you ever find a solution? I have the same issue
@@thewhitegoldfish I called Bose and complained and they sent me a brand new pair of headphones! I told them the problem started right after I updated the firmware. That seemed to be why they could do that.
Why do you use the "blowtorch" instead of the pen? Is it possible to do it with just the pen?
Im not sure what the question is. Are you asking about a heatgun vs a solder iron?
Do you have information on how to send in for a repair?
Hello, You could definitely send your device to our repair center and we can take a look. Here is the link to our website 👉www.joesge.com/pages/repair-service - Aaron P
My roommate accidentally vacuumed the screws you did in the last part(the ones you have two of). Can’t seem to find them anywhere. Do you know any way to get them?
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there.
where can i get this tool you used 00:05:042 you called "Weiss" a "Wassermann Clamp"?
Hello, thanks for commenting. Please email us at support@joesge.com with your question. We will be able to better assist you there. - JoesGE
what do you do with no heat gun?
You could try a hair dryer. Just dont melt any of the plastic
Do you know of a source for the 2.5 mm Jack on the QC35? Thanks
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
yo, what happens if when i removed the switch, in one point there's no solder no more, there's just a brown/orange space and i cant put solder there:(
Hello, thanks for commenting. Please email us at support@joesge.com with your question. We will be able to better assist you there. - JoesGE
My bose will come on after reset. Then next time it won't come on. What is problem?
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
Mybe the battery life time end.
Can you share a link for the flux you use?
Amtech NC-559-V2-TF No-Clean Tacky Solder Flux 10cc Kit - Tools
www.joesge.com/products/amtech-nc-559-v2-tf-no-clean-tacky-solder-flux-10cc-kit-tools?_pos=1&_sid=85f3e2835&_ss=r
А у меня постоянно горит синий зуб. И он не реагирует когда я выключаю наушники он так же продолжает гореть белым. А так все работает. Но батарея быстро садится так как синий зуб горит всегда.
Может кому то поможет - проблема была в плате зарядки.