How to Sand, Fill and Prime 3D Printed Parts - Viking Mandalorian - Part 1
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- How to Sand, Fill and Prime 3D Printed Parts - Viking Mandalorian - Part 1
In this video I'll cover How to Sand, Fill and Prime 3D Printed Parts using a really cool Mandalorian helmet that I'm going to give a viking look. A lot of people ask me how do I get helmets and other props so smooth. Well it's not easy you have to do a lot of sanding, filling and priming. There are some key steps in-between that I'll also cover in this video. Sanding PLA can take some time, but in the end you get smooth prints that are really easy to paint and look great. Painting 3D prints and weathering 3D prints can make them really come alive.
0:00 Intro
2:12 Supplies
2:50 Unboxing the Helmet
4:45 Layer Lines
6:33 120 Grit
8:22 220 Grit
8:46 320 Grit
9:14 400 Grit
9:40 Priming
10:16 Second 400 Grit Sanding
11:00 Filling Larger Layer Lines
12:30 400 Grit Sanding
13:09 Second Priming
13:30 Final 400 Grit Sanding
13:58 Additional Tips
Check Out My Patreon and Get 4 FILES A MONTH!
bit.ly/3V2JJKM
Pick-Up Models from My Site ➜ 3dprintedprops.com
For 20% OFF Use: 3DPRINTEDPROPS1020
ITEMS I USED IN THIS BUILD
Rust-Oleum 260510 Automotive 2-in-1 Filler & Sandable Primer
amzn.to/3eQtixW
3M Pro Grade No-Slip Grip Sandpaper, 3-Pack, 120-Grit
amzn.to/3ER7D3e
3M Pro Grade No-Slip Grip Advanced Sandpaper, 9 X 11-Inches, 220 Grit, 20/Pack
amzn.to/3q5bYMh
3M Pro Grade No-Slip Grip Sandpaper, 3-Pack, 100-Grit
amzn.to/3sXL6zx
3M 25320P-G Pro Grade No-Slip Grip Advanced Sandpaper, 9-Inch x 11-Inch, 320 Grit, Pack of 3
amzn.to/3pUOzwD
3M Pro Grade No-Slip Grip Sandpaper, 3-Pack, 80-Grit
amzn.to/3FXZfAd
Bondo Body Repair Kit
amzn.to/3JMzRQc
Bondo 261 Lightweight Filler Pint Can - 14 oz.
amzn.to/3sZB9AJ
Bondo Glazing Putty
amzn.to/3NslEZY
Bondo 357 Plastic Spreaders 3 Piece
amzn.to/3n1esZQ
BASE CAMP M Plus Dust Face Mask
amzn.to/3zA8tAn
MINI Diamond Needle File Set
amzn.to/3HzLlEU
3M Sanding Sponge, Fine Grit, 6-Count
amzn.to/3zt9IkS
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing
amzn.to/3t4km0a
Buy Helmets from Villainous Prop Shop
www.etsy.com/shop/VillainousP...
villainouspropshop.com/
You can buy some printed versions of my helmets over on Villainous Prop Shop's Etsy page!
etsy.me/3vX1sXc
I use Zlytech Filament. Use the code 3DPRINTEDPROPS to get 15% OFF your order
www.zyltech.com/
____________________________________________
Check out my 3D Printing Courses on Udemy ➜
3D Resin Printing: From Star to Finish
bit.ly/2ZeIBbN
3D Printing: From Start to Finish
bit.ly/2Nu91Uh
How to Make Money With Your 3D Printer
bit.ly/3Kl1Ern
Design Awesome Graphics For Social Media with Canva
bit.ly/2ZhvJly
____________________________________________
STANDARD 3D PRINTERS I LIKE
Ender 3
amzn.to/3olwPcF
ENDER 3 S1
amzn.to/3L4EkPa
amzn.to/3Gr0sj0
amzn.to/3rlhafp
ENDER 3 PRO
amzn.to/3oiTzdu
ENDER 7 (affiliate link)
amzn.to/3rwfSyz
CREALITY CR-10
amzn.to/3IZfsqc
ELEGOO Neptune 2
amzn.to/3GnrS9i
ELEGOO Neptune 2S
amzn.to/3oj70de
ANYCUBIC Mega S
amzn.to/3senswr
ANYCUBIC MEGA X
amzn.to/3IUKf7q
____________________________________________
Interested in resin 3D Printers?
____________________________________________
Peopoly 3D Resin Printers--
USE CODE 3DPRINTEDPROPS AND GET A BOTTLE OF RESIN (affilate link)
The Peopoly Phenom L ➜
bit.ly/3bgYl5q
Peopoly Phenom ➜
bit.ly/35j666Z
Peopoly Phenom Noir ➜
bit.ly/35ju7ei
Peopoly Phenom XXL ➜
bit.ly/3bmg3ED
________________________________________________
Elegoo Mars ➜
amzn.to/2SoIV4i
Phrozen Sonic Mini ➜
amzn.to/3jqqGYe
Anycubic Photon ➜
amzn.to/33u5WcF
________________________________________________
Resin 3D Printing Supplies ➜
Resin - amzn.to/2GfHUcH
Disposable Gloves - amzn.to/2SqG7Uu
Plastic Spatula - amzn.to/30vuX5c
Metal Spatula - amzn.to/33tYUoc
Isopropyl (IPA) - amzn.to/3jyATlm
Pickle Container - amzn.to/3cX3fDv
Funnel - amzn.to/3isSLgo
Paint Filters - amzn.to/2HP3LI8
Lunch Tray - amzn.to/2Snt9a0
____________________________________________
Gear I'm Using ➜
Sony Alpha a6400 - amzn.to/2HNNi70
Sigma 16mm f/1.4 - amzn.to/3cZnIaO
Batteries - amzn.to/3lcqpbP
Lighting - amzn.to/30w2Xi3
________________________________________________
Twitter ➜ / 3dprintedprops
Instagram ➜ / 3dprintedpr. .
Facebook ➜ / 3dprintedprop
TH-cam ➜ / 3dprintedprops
____________________________________________
WHAT TO MAIL ME SOMETHING?
P.O Box 1004
Little Falls, NY 13365
#3DPrinting #3dResinPrinting #Resin3dPrinting - แนวปฏิบัติและการใช้ชีวิต
This is the most comprehensive tutorial I've seen on sanding 3d prints I've seen. Thanks for posting!
Thanks man, I appreciate it. :)
super in-depth tutorial!! sooo clutch. Been using ur sand, fill and prime technique for all of my prints and they always turn out great!
Thanks man. Glad it helps.
Can't thank you enough for these tutorials as I cautiously approach finishing some prints. You're a huge help because of the quality of video and of your instructions. Subbed 👍
The exact level of detail I was hoping to get from a video, being new to 3D printing and prop making!
Thank you kindly! Liked and subscribed.
Thanks for all your videos. Very thorough. Very informative. So many questions had were answered so easily. Thank you!
Nicely done 👍
Awesome! Just got started on my first mando helmet 3d print and this was exactly what I needed. Perfect timing!
Awesome. Glad it helps🙂🙂 be sure to chk out the red hood helmet videos too.
I just started my first sand today on a Do3d robocop helmet, and this video has taught me so much! You definitely earned a new subscriber today!
Ok - so I tried your method of sanding down first before spraying and I loved it. Another advantage is that it saves on sandpaper, too. Sanding on the filler primer really would gunk up my sandpaper. This was was much better!
Totally inspiring keep it up nice to detail
Nice one, Kevin - one of the most impressive helmets I've seen for a while!
Thanks, Pete over at Villainous Prop Shop designed and printed it...I'm just doing the finishing. :)
this channel deserves way more love than it gets. so much more in depth and care taken in explaining why you need to do certain things and how to do them without making it boring great job and thank you
Wow. Thanks🙂 I really appreciate that. Thank you.
@@kevinvolo5208 Of course👍
Great video. About to tackle an entire Mandalorian Beskar Armor. Not looking forward to the sanding as I too have major pains in my joints, going to Home Depot to buy sponges right now. Great videos btw Kev. Love this.
Thank you. Excellent videos and just what I'm looking for! Liked and subscribed!
Awesome, thank you!
I just received the same Helmet last night and normally I would start but filling then sanding I am going to try the sand prime method . Looks like it works great I have an hour into sanding so far...
Sanding first will give a better mechanical adhesion. Then the fillers and paint will stick better.
👍👍💯💯👍👍
LMAO, " like nobody's business" epic!, awesome and very informative video 👍can't wait to see the helmet finished
Absolutely love your videos, you inspired a friend and I to buy mandalorian helmets from VPS and start working on them, using your videos as guides! Are you still planning on making a video for installing a voice amplification system for this helmet? We’re looking to do the same but we’re unsure how exactly to go about it for a helmet like this.
Thanks for everything you do!!
Amazing Video Series!!!! Used this to paint my Darth Revan helmet & made a project out of it with my girlfriend! Thanks so much for going through all the steps & explaining everything! Can't wait for Halloween!
I think this might end up becoming a hobby of mine!
good video, thx so much
This is great! I’m about to start a Power Ranger kit that I’m doing myself and this is really going to help with the helm! Cheers!
Cool. Glad it helps. Chk out the red hood helmet videos too. I cover everything.
@@kevinvolo5208 I actually saw those ones first! lol extremely impressed!
Thank you. 👍🏻
excellent tutorial applies t o any 3d printed mask and all the nuances of it.
I have this helmet currently printing and then your vid popped up in my feed. Lol
A friend of mine told me about your videos so I’m trying to learn and so far I really enjoy watching and learning. I was wondering what would you do if the print came out white but I want to be able to see how well the sanding is working?
nice tutorial, how about small prints? do you have any tips for sanding, filling and priming small prints?
Awesome video Kevin...when I wet sand it seems to remove some of the primer around the edges and corners. Should I apply another coat after wet sanding
TYVM! Hard to figure out the grits and how/when to move to next sandpaper.
Thanks for uploading this. Currently sanding mandarlorian bracers and it has the same fine details 7:16, did you just use that needel file to sand it?
Love this video. Can this process be done with screen cast resin helmets or only 3D prints?? TIA
I'm getting the Bane V2 mask, and I'm wondering what colors you would use for the helmet/mask if I'm trying to get it to look in the traditional black and white
I prefer Polyester Glazing Putty. (evercoat in the can) It comes with hardener like regular body filler. It's very easy to spread, dries fast and sands really easy.
Edit: Also, I always use guide coat after priming. You take some black spray paint and lightly spray over the primer. Basically a dust coat. This will show where you haven't sanded or places that aren't sanded enough. Like some layer lines that you might have missed.
Oh. That sounds cool. I'll have to try it. Thanks.
what brand of polyester putty do you use?
@@user-xg8sz4dr9n Evercoat.
Villainous is great
Do you recommend this sanding process for armor too? And i see people sand it with water as well, should i do it too or?
I wanted to say your channel is so helpful to me and I want to pick uour brian on some other sanding questions. Is there a way to contact you off channel to ask more detail questions?
So I’m currently working on a PLA helmet I printed. Should I seal the inside with primer and paint?
What are you using as a helmet stand? And, what is holding the helmet up?
Is there a difference between the sandable and fillable between the regular filler primer, the regular filler primer says it can be sanded and it is the same brand
That bondo putty doesn't wash away when you use soap and water to remove the dust?
How long do I have to wait to let the 2-in- 1 filler and sandable primer dry in order to sand it again?
Great videos! Give this guys channel a follow!
I think those horns should represent the Mythosaur horns (?)
I haven’t been able to find the sandable rustoleum primer/filler at my home depot. All they have is the automotive version but it seems to be working like the regular primer/filler
You can get it on Amazon too. Super easy check out the links.
if you have a tractor supply try checking therr
I am so glad I came across this video. I just got my first 3D printed Mando armor set and it looks like I have a LOT of sanding ahead of me. Would using a small Black and Decker handheld sander not work or would it burn through the material? Thanks!
Awesome, hope it helps. Check out the red hood series too. You can use an orbital sander, I have. You just need to be careful to to keep it in one place too long and not bear down too hard or you will melt/damage the helmet.
@@3DPrintedProps Awesome! I was hoping you would say that. Can't wait to see the follow up vids. I have a voice changer and some other stuff I want to add. Looks like you are going to touch all the bases!
@@SnarkySolarGuy Yep, unfortunately going to have to wait a bit. I broke my arm last week. Agh. Really slowing me down. :P
@@3DPrintedProps Oh no! Get well soon!
I finally started on my bucket and this guide has been so helpful! The only question I have is how do you know when to stop sanding and move on to the finer grit? I hear that screeching noise with the 80 grit as I move across the lines. Do you keep sanding until you can't hear that noise or just enough to rough up the surface? Thank you!
Hi Kevin- can you sand indoors with a mask on? Or would you always suggest just doing it outdoors? And how long would you say all the sanding takes in total? Thank you
You can sand indoors, just know it makes A LOT of plastic dust. So if you could have a vent that sucks it outside that would be best. It depends on how smooth the surface is, but I would estimate a good 20 minutes per grit.
@@3DPrintedProps thank you bud. I opted just for sanding out in the back garden, i'll stick to that!
I can’t find the filler sandable primer on amazon, can i use another spray ?
Sure, any primer will work, but the filler/sander gives you a thicker coat you can sand.
Can I use a normal automotive primer, since where I live I can't find a 2n1 primer?
Yes. U just don't want. To sand it.
Not sure why, but every time I’ve used bondo it never hardened like it’s supposed to. Any thoughts on why that might be? It’s a new tube that I’ve only had for a few months.
The only thing I think it could be is you're not adding enough hardener, or maybe temperature and humidity.
Hmmm. Ok. Thank you. I’ll try out some different things.
🤯
after washing it do you just let it air dry? how long if u do?
Hello, I let it air dry so I don't get any cloth or paper dust on the helmet. Drying depends on temp and humidity but if its warm and dry out just a couple hours. But I mostly wait till the next day.
Link to part 2 please, thanks.
Should I not used the bondo in the can? I even took an orbital sander to it and it’s barley even sanding it. Feel like the print is a bust now..
You can use bondo, use a lower grit to get the bondo down, then go to a finer grit.
hey are we going to see you paint it aswell?
Yep, Unfortunately I fractured my elbow and have been out of commision for a while. Should be able to start up again soon.
I'vI've seen other people use a mouse or rotary sander. Is that a bad idea?
I have done that, but I need to be really careful. You can easily melt and or go through that too layer and break into the infill.
No wet sand?
Australian equivalent of bondo and spot putty?
On your website I want to subscribe but idk if it costs moneys does it?
There is no subscription, your email is just added to my mailing list for news and sale info
@@3DPrintedProps oh ok I bought your mk85 Ironman mask to make for friends birthday it’s printing right now it’s a great design
Make it reflective!
Not this one. I have another idea. I am going to do a chrome helmet soon, its on the printer now. Going to be the Peacemaker helmet. :)
How tf do I know what grit to use
Seems like the print itself quality is not the best because time is saved using bigger nozzle why those crazy big lines.
please don’t spray and sand without a mask man, amazon video otherwise
isn't a viking helmet cultural appropriation? 😘 sorry.. to be serious, would it not make sense to print in ASA or something that can be smoothened first with asethone?
Vikings didn't have horns on their helmets.
So I’m currently working on a PLA helmet I printed. Should I seal the inside with primer and paint?
Hello, I don't usually do anything in the inside other than sand down any sharp bits.