Frankenstein Coyote Build Part 1
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- This is by no means a super detailed assembly video. Rather just some footage of my buddy & I hanging out and putting this engine together.
Engine build is below:
Gen 3 Coyote Shortblock
Gen 1 Coyote Heads (Refreshed)
Gen 1 Timing Components
More to come in the next video to include cam install.
Great content. I just spun a rod bearing on my gen 1 Coyote. I'm interested in going with the gen 3 short block and gen 1 heads and valve train. I have a couple of questions. 1. Does the gen 3 short block come with the oil pump? If not can I use the gen 1 pump and pickup? 2. Does all of the gen 1 timing parts work? Including the crank sprocket and balancer? 3. Do I have to use gen 1 head bolts? or will gen 3 head bolts work? Thanks!!!
Definitely encourage doing the Gen 3 shortblock swap. Great bang for the buck.
1. Yes it comes with the Gen 3 oil pump which includes the plastic oil pan and oil pickup.
2. Gen 1 timing absolutely works with it. Gen 1 or Gen 2 heads work as well. Yes including CSK&OPG.
3. Gen 1/3 share the same 12mm head studs. Highly encourage getting ARP head studs if you do a Gen 3 shortblock swap.
@@vonlipichracing251 Thank you for the information man! I appreciate it.
@@vonlipichracing251 what gaskets ? 3 or 1
@@CalebsCars head gaskets are gen 1
@@vonlipichracing251 For (3) Not all Gen 1s use 12mm head studs. The 13/14 Gen 1 use 11mm. Just for someone reading this.
Hey! So I plan on doing this, you used gen 1 heads correct?
Awesome! It’s definitely a good upgrade. Yes, I reused my Gen 1 heads after taking them to a machine shop to get cleaned up.
Si.
Si wei!