Lovely video. You gave me the knowledge and confidence to troubleshoot my washer. I found the hose connecting the drum was loose. All i had to do was reconnect it and tighten the clip. Voila!
Absolutely the best and easiest explained repair video I have ever seen anywhere. Precise and well spoken with no Led Zeppelin music playing in the background and explanation was about the problem and not about making you a movie star. Thanks for taking the time and for the great explanation.
Been dealing with a leak and discovered $5.33 in change, a broken pen case, a rivot, and a toothpick in the drain pump. Replaced door bellows a couple months ago and worked for a while. I never realized there is a filter in the drain pump until i seen a video for it but this video adds more trouble shooting techniques. thank you for sharing this great information. Now on to the filter and hose checks.
You can add "Split on the th drain hose near the drain pump" to the list. It will leak not quite as fast as the water fills (a lot) when a cycle begins. I found this out on ours. I just found the split as I was checking the things that you recommended. Thanks, Great video!
Excellent preview of what I need to do to fix the leak that just started on our LG front load washer. I will follow your steps one by one. Thank you sir.
Thank for you this informative and easily to understand video. I’m going to take some time today to look over my washer and figure out why it’s leaking. I’m a single woman and don’t have many people I can call for help with things like these.
A small black rubber tube near the bottom and just inside the rear access panel came detached from whatever it was supposed to be attached to ( I am not certain what it was) on our LG frontload washing machine and flooded our laundry room, hall, kitchen, and basement. Yes, one small detached rubber tube caused all of that. I did not find any clamp, so I reattached the tube (to whatever it is) and taped it for extra security.
Thank you very much! You helped me fix my Whirlpool. It was leaking from the detergent dispenser at the top because there was a blockage in the dispenser hose. This video is awesome.
Thanks so much. Callout in London England is the same cost as a new machine - but what about the environmental cost of un-necessarily replacing a good machine? Thanks for sharing your knowledge.
Mine leaks during the rinse cycle only on my Maytag 2000 series front loading washing machine, but only from the center of the top of the bottom panel. It starts 10 minutes into the rapid wash cycle, so when the washing machine shows 18 minutes left of the rapid wash cycle and continues leaking until there are 14 minutes left of the cycle, then stops. It leaks enough to soak 3/4 of a bath towel that is under the bottom panel to catch it. Any ideas? Thank you for your wealth of knowledge.
Great Video. I’m finding water inside my whirlpool front load machine from one day to the next without any usage. I’m suspecting it’s the inlet valve letting water in after the cycles, but how can I be sure? Thanks.
I learned a great deal from you, but my leak was not in any of those area. Its coming from one of the three hole that connected to the detergent basket.
That was a fantastic video. Thank you very much. And because you are taking care of your customers so much, I will be sure to check your catalog for the parts that I need.
It’s overflowing at the fabric dispenser but the drawer is clean and not clogged. The water seems to kind of fill the tray to fast at that area. I have tried turning down the water pressure, but it does not work.
I would take the top off and inspect the hoses going to the dispenser. During the rinse cycle water is also being diverted to the fabric softener section of the housing. That could be why only seeing it during the rinse.
My washing machine drum is filling up with water once in about every 2 days. I removed the water inlets and apparently there is no dripping from them. Yet, I left them in bowls and I am waiting to see if they are the cause of the problem. If they are not, what other parts might be the reason?
@@dianaasare4895 After keeping both water inlets in bowls for about 2 days, I could see the faulty one. I replaced it with another inlet and had no problem since then.
i tried to drop the main drain hose i didnt see any holes or feel any. but i couldnt get it all the way out. is there any other reason why it would dump water on the rinse/drain cycle? maybe the drum.
I tried pouring water in my detergant area to fill the drain pump back up. But i noticed as i did this i saw water leaking out from right under the washing machine right below where the drain pump is. Could you tell me which problem is more likely?
@@redsed1565 Sorry about that! I just replaced the inlet assembly. It was pretty easy actually. This was a long time ago but I still have the washer and it doesn't leak so I guess I fixed it. lol But mine wasn't leaking in the tub it was leaking on the floor. You may have a different issue.
Mine is leaking either at the front or middle of the washers left side(looking at it) ( or the floor COULD be slanted and its acctualy the back but i doubt it) Im betting either something is stuck in the softener adding place hoe (which is likely BUT the washer start usualy leaking from the very begining of the wash( and im assuming softener is added only from the middle ti the end of cycle and so the water gets there) so unsure. Lemme come back tomorow or tuesday and update what i discovered after taking off the front ( cause right now i gotta wash them clothes 😂) Fyi its not leaking A LOT. Id say a 1/4 of a glass of water, mostly at the beginning of the cycle. I've been know to sometimes most likely overload the machine so i hope its not the center damage.
I have 3 cats and enough cat hair stuck in the bellows and drain holes from tub to make a 4th. Eww. No one warns of that. I’m hoping since mucking it out that will help my water issue which is water seeping out between bottom of tub section and above bottom panel whirlpool Duet front loader.
This video is 1,000,000 times more helpful than the LG web site.
Honestly
but the background music sucked so bad I never watched the whole video
You're not trying to be a social media influencer, just providing good useful info. Thank you!
Lovely video. You gave me the knowledge and confidence to troubleshoot my washer. I found the hose connecting the drum was loose. All i had to do was reconnect it and tighten the clip. Voila!
Thank god for professionals willing to share their knowledge. I have to fix my sisters washer and this is definitely great information.
Ong, woulda thrown it away
Absolutely the best and easiest explained repair video I have ever seen anywhere. Precise and well spoken with no Led Zeppelin music playing in the background and explanation was about the problem and not about making you a movie star. Thanks for taking the time and for the great explanation.
Thank you Parts Select! You saved me hundreds on the dryer, now my washer is leaking and I'm back! THIS is what technology should be used for!
Been dealing with a leak and discovered $5.33 in change, a broken pen case, a rivot, and a toothpick in the drain pump. Replaced door bellows a couple months ago and worked for a while. I never realized there is a filter in the drain pump until i seen a video for it but this video adds more trouble shooting techniques. thank you for sharing this great information. Now on to the filter and hose checks.
This is an excellent video, thank you, its nice to find a resource that is realistic and relevant, not click bait.
You can add "Split on the th drain hose near the drain pump" to the list. It will leak not quite as fast as the water fills (a lot) when a cycle begins. I found this out on ours. I just found the split as I was checking the things that you recommended. Thanks, Great video!
By far the best troubleshooting video for washing machines.
Excellent preview of what I need to do to fix the leak that just started on our LG front load washer. I will follow your steps one by one. Thank you sir.
Thank for you this informative and easily to understand video. I’m going to take some time today to look over my washer and figure out why it’s leaking. I’m a single woman and don’t have many people I can call for help with things like these.
Loved the step by step and suggestions for if the screws, etc were located in different parts. Worked for me. Thank you so much!!!
A small black rubber tube near the bottom and just inside the rear access panel came detached from whatever it was supposed to be attached to ( I am not certain what it was) on our LG frontload washing machine and flooded our laundry room, hall, kitchen, and basement. Yes, one small detached rubber tube caused all of that. I did not find any clamp, so I reattached the tube (to whatever it is) and taped it for extra security.
That's the emergency drain tube I believe and on trying to empty mine, I pulled the whole tube out 😢. Now I'm trying to figure how to replace it
@@onwubikochisom9673 The drain tube is in the front. The tube that came lose on my washing machine was in the back.
Thank you very much! You helped me fix my Whirlpool. It was leaking from the detergent dispenser at the top because there was a blockage in the dispenser hose. This video is awesome.
I have a Maytag with a leak. I have watched many Video on the subject. This is the by far best video have seen.
Thanks so much. Callout in London England is the same cost as a new machine - but what about the environmental cost of un-necessarily replacing a good machine? Thanks for sharing your knowledge.
This video is so useful. Great knowledge shared!! I am fed up of waiting for the technician to come fix the leak, I'm going to do it myself
Thanks mate, this was an incredibly helpful video that lead to me identifying the problem in about half an hour! You're a legend
I believe yr sharing of water leak of front load washing machine is certainly helpful. Many thanks
Boy, I feel empowered, now that I know whats it all aboot! Thanks
Omg your an angel. My machine was leaking and turns out it was the dispenser hose just a bit popped outta place! Thank you for your knowledge😊!!
Very good video. I’ve spent more time repairing our POS Maytag front loader in 2 years than I have in 12 years with our LGs.
This is the exact washer I have and it's pouting water out the bottom, ty very much for sharing this
Mine leaks during the rinse cycle only on my Maytag 2000 series front loading washing machine, but only from the center of the top of the bottom panel. It starts 10 minutes into the rapid wash cycle, so when the washing machine shows 18 minutes left of the rapid wash cycle and continues leaking until there are 14 minutes left of the cycle, then stops. It leaks enough to soak 3/4 of a bath towel that is under the bottom panel to catch it. Any ideas? Thank you for your wealth of knowledge.
Thank you so much, I was missing the most simplest thing and now I got it fixed
Great Video. I’m finding water inside my whirlpool front load machine from one day to the next without any usage. I’m suspecting it’s the inlet valve letting water in after the cycles, but how can I be sure? Thanks.
Wow, very upfront, to the point and very knowledgeable. And explains so I can understand
Thank you!
Very very informative I learned a lot also I have no idea what I’m doing but thank you for the information
Good day my friend, I changed the bellow and it still leaks. If that retention is stiff and corroded could that be it?
You are a legend mate thank you
Thank you so much I learned a lot of info and u saved me at least 200 for the repairs thank you
I’ve got A kenmore steam ast2 washer with some soapy water discharge from the vent at the rear. Is this repairable?
I learned a great deal from you, but my leak was not in any of those area. Its coming from one of the three hole that connected to the detergent basket.
That was a fantastic video. Thank you very much. And because you are taking care of your customers so much, I will be sure to check your catalog for the parts that I need.
You're awesome! I truly appreciate your help. I send blessings to ALL!
very educative. Thank you regards
It’s overflowing at the fabric dispenser but the drawer is clean and not clogged. The water seems to kind of fill the tray to fast at that area. I have tried turning down the water pressure, but it does not work.
Vent leaking checked plunger in vent hose little dirty cleaned worked for a couple loads leaking again thinking of pulling pump and possibly replacing
my washer leaks from the bottom during the rinse cycle only...no issue during the wash cycle. Your thoughts, please?
I would take the top off and inspect the hoses going to the dispenser. During the rinse cycle water is also being diverted to the fabric softener section of the housing. That could be why only seeing it during the rinse.
My washing machine drum is filling up with water once in about every 2 days. I removed the water inlets and apparently there is no dripping from them. Yet, I left them in bowls and I am waiting to see if they are the cause of the problem. If they are not, what other parts might be the reason?
I realize this comment is a few months back,I am currently experiencing this problem, I hope someone can explain this problem.
@@dianaasare4895 After keeping both water inlets in bowls for about 2 days, I could see the faulty one. I replaced it with another inlet and had no problem since then.
@@atfnik5348 thank you.
@@atfnik5348 How is the hose the problem? Surely its a leaking valve or solenoid issue?
@@redsed1565 yes, the reason was a faulty inlet, after replacing it I had no issues since then.
Thank you. Now I gonna fix my washer.
WHAT ABOUT A LEAKING FILL VALVE/SOLENID? HOW TO FIX?
i tried to drop the main drain hose i didnt see any holes or feel any. but i couldnt get it all the way out. is there any other reason why it would dump water on the rinse/drain cycle?
maybe the drum.
I tried pouring water in my detergant area to fill the drain pump back up. But i noticed as i did this i saw water leaking out from right under the washing machine right below where the drain pump is. Could you tell me which problem is more likely?
Thanks Steve Ash!
Did I mess a part? Can’t pumps leak when they go bad?
This is a GREAT tutorial- thank you for putting this together!
This is a great video. Thank you.
Whoa. Now that was a really detailed “how to” post. Thank you!
You saved my washer thank you
You're very welcome!
lol. Wonder what that small item was in the rubber hose at the top! lol
Thank you for this video, great trouble shoot guide
My washer was off balance and the door opened leaving the plunger in the lock. How do I remove the plunger so that I can reattach to the door?
switch off and wait 1 minute
Sir I truly appreciate your work. Thk you 🙏
Best explanation ever. Thanks
Very helpful!
Great video!
Great Video and very helpful information.
Everytime the machine is rinsing the water start leaking..how to fix it
Thanks mate, that was very helpful 😁
Excellent video!
I have standing water in the bottom drawer that holds the detergent bottles. Any ideas?
Did you find out what was wrong with your washer?
@@madisonyates7561 no, ended up buying a new one. It was my second repair in 6 months so I figured the hard well water got the best of the machine
Very informative. Thank you for sharing your knowledge.
Thank You for the great details.
Thanks for the info
Very nice video
Thanks,that was very good knowledge. But I have a different kind of problem.
Can somebody help.me.here I have a problem.about the seimens washing machine leaking hope somebody can help me
I remember my dad finding a necklace in the drain pump filter on a used washer we had bought.
Amazing. Real professional
very helpful! Thanks much!
Excellent tutorial! Thanks
you got to show how to open top and front console step by step TK
thank you
You saved me a lot thank you so much
Excellent .Thank you.
Thank you very much 👍
Great video! Thank you kind sir!
Thanks Mate.
Thank you!
Hi Steve.
Water valves also cause leaks. I've got a cold water inlet that is leaking. Also an easy fix.
yes I have the same issue which he did not cover. Its filling up in the drum when the machine is off. Can you please tell me how to fix this issue?
Gee whiz, without seeing it I would have no idea. Google knows, I'm sure.
@@robsaxepga ha ha I think I confused you! My issue is from the water inlet valve leaking into the drum when machine is off. How did u fix ur valve?
@@redsed1565 Sorry about that! I just replaced the inlet assembly. It was pretty easy actually. This was a long time ago but I still have the washer and it doesn't leak so I guess I fixed it. lol But mine wasn't leaking in the tub it was leaking on the floor. You may have a different issue.
Very informative
Just great.
Mine is leaking either at the front or middle of the washers left side(looking at it) ( or the floor COULD be slanted and its acctualy the back but i doubt it)
Im betting either something is stuck in the softener adding place hoe (which is likely BUT the washer start usualy leaking from the very begining of the wash( and im assuming softener is added only from the middle ti the end of cycle and so the water gets there) so unsure. Lemme come back tomorow or tuesday and update what i discovered after taking off the front ( cause right now i gotta wash them clothes 😂)
Fyi its not leaking A LOT. Id say a 1/4 of a glass of water, mostly at the beginning of the cycle. I've been know to sometimes most likely overload the machine so i hope its not the center damage.
Same with d situation here
Thanks so much
Thanks!!!!
I'm in my 3rd door boot seal😒 Electrolux 😑
Thanks for the info, found a coin and damaged the bellow.
I have 3 cats and enough cat hair stuck in the bellows and drain holes from tub to make a 4th. Eww. No one warns of that.
I’m hoping since mucking it out that will help my water issue which is water seeping out between bottom of tub section and above bottom panel whirlpool Duet front loader.
So i guess this front load technology is crap vs the old tub style?
Pretty much so, I’m afraid. Front loader is a very delicate piece of equipment compared to the ‘old-fashioned’ top-loader with an agitator.
Samsung wf600b0btwq/tl. Is leaking from beneath , how to mix?
Thanks! :)
You're welcome!
thank you, Sir!
My bathroom is like an ocean 😆😳
Bro fax
My washer is still leaking BIG PROBLEM!
Titles comes in the middle of the video so we can't see it properly.
So buy a top loader. Got it