My machine only leaked if you did a number of loads in a row. I found a drawstring clogging a hose so my guess is that it had to swell a bit before it started leaking This was a zero dollar fix. It can pay to simply look sometimes. But if you need parts, these guys are great. Reasonable prices. Able to return parts with no problem. Keep up the good work.
I’m having a similar problem, previously it would leak just every now and then but it’s getting more frequent now, but it leaks only when the water drains out. I’d bet something might be partially blocking my drain hose? I have a cat and I wonder if it’s possible that it’s cat hair.
Wow, this was super helpful. Thank you. I bought a used washer for my basement and it was leaking as the tub started to fill. I thought it was the water pump and seal, but it turned out to be just the connection of the inlet hose. Seem like a heavy load that rocks the machine will cause this to come loose. Quick 10min fix no additional parts needed! Thank you again!
Thank you I truly appreciate these videos. I am a widower and I have been cheated a couple times out of money for some things I could have done myself myself.
this video saved me 800 USD you earned my subscription and like. was about to buy a new one but found out the issue with my washer was a sock stuck inside my washer pump blocking the way. thank you
Time stamps: 0:00 Intro 0:24 Drain Pump 1:00 Ordering parts 1:27 Door Seal/Clamps if you have a front load washer 2:01 Hoses 3:08 Tub Seals 4:09 Like and Subscribe 4:15 Water Inlet Valve 4:35 Detergent Dispenser 4:58 Flooding Safety Tip 6:14 Outro
This video saved me a service call and who knows what else . Trouble shot the issue and all it was , was the bracket that holds the discharge line came loose and the line flat spotted on the ground from the vibration causing two pin holes to leak from so a huge thanks for the video .
My washing machine flooded my laundry room twice. The first time, I thought my washing machine became off balance during the spin cycle and splashed water everywhere. After the second time my room was flooded, I decided to run it again and closely monitor my washing machine go through it cycles so I would know where the leak was. I found out my drain pipe was clogged. Once the washer machine went in drain/spin cycle, the drain pipe quickly filled up with water and spilled out all over the floor. I used a drain snake/augger to clear the debris but all I did was shove it down the pipe and pack it very dense. I had to buy Flow Easy ™ drain opener to get the lint, cat hair, and dust clump to flow down the pipe and open it up. After waiting 10 minutes, I restarted my washing machine. The water drained into the pipe and all that gunk finally washed down. It cost me about $17.00 for a 30 oz container. That's a lot cheaper than spending hundreds on a plumber!
We do try our best to keep things easy for our customers. If there is anything we can help you with please let us know. Good luck with your repair and let us know how it goes!
Just thought I would add that on front loading washers, there are usually small drain holes in the bottom of the rubber front door seal/boot/gasket. Sometimes coins and other debris will get trapped in there and block these drain holes, causing wash water to flood/leak out the front door... 😁
First of all, thanks so much for having this TH-cam channel!! Very informative!! I feel confident that I can repair a few of the issues that may pop up with my old school top load washer. So my old school washer had a big leak in our laundry room which is luckily a cement floor. I called our local repair store that I've used for years, and they came out but were unable to find any leaks when we test ran the machine. They thought maybe it was a leak from my bathroom which was on the other side of the wall of the laundry room. I used it a few times after and it was fine. But after using it the last time, I again had a leak, this time a small one. I tipped over the washer and felt around the inside and bottom of it, but it was bone dry. I am perplexed. None of the hoses were wet, nor was there any water in the adjacent bathroom. Any ideas on how to pinpoint the leak?
Top load washer. Leaks on fill cycle. Drips on left side on edge like Mabe the hose to fill tub maybe cracked?????? Also drips on rinse cycle. Only when water is sprayed in tube it drips. Fill tub and machine off no drips.
My top load washer keeps filling with water. I won't shut off and go to the next setting(like agitate) and it appears to be leaking just a little bit. Any ideas why?
"floor is full of water, because the washing machines supply line not capped ", can you explain what it means by "supply line is not capped", is there a cap or a screw on the supply line?
If my washer machine is leaking in the bottom would that stop it from spinning I have a general electric three year old, I already changed the water pump it leaks when I put it on the big load what else could it be. ?
On top loaders the bleach feeder could be leaking easiest way to fix is to open the upper rear panel n disconnect the pump that delivers water to the bleach tray, the pump should be the last pump on the right side of the machine looking at the machine from the back.
After a cycle finishes, water is entering the tub from the bottom. It's like it's bubbling up. Does this mean the valve between the drum and the drain hose has failed and that water is coming back in? We just replaced the inlet valve because we had a drip. The drip is gone now. So when I would wash a lot of clothes and come back an hour or two later to move them to the dryer, and the clothes were wet, we thought it was from the drip. But I think we have the drip going on plus this water bubbling up from the bottom.
@@appliancepartspros It magically stopped once I pulled the washer away from the way and took off the top plate. I put it back and still no leak. Maybe the electronics got stuck and simply unplugging it from the wall did something??
Have you ever heard of washer in agitator cycle fling droplest out of tub and into the interior of washer? Fills up the bottom piece until it finds the lowest hole and runs out onto floor
My washing machine leaks from a drainage hose while filling water once I start washing leakage stops.So how can solve this problem? Please any Suggestions.
My washer only leaks during rinse drain cycle and then wont spin out...works fine during wash cycle the whole way through...what is causing this?! I have the Amana NTW5500TQ0 and am confused as to what part is exactly having the issue...do happen to know whats going on?
You will need to check to determine where the water is coming from. It could be a loose or damaged hose, or a damaged part. You will need to replace whichever part is damaged.
I don't understand. Just moved into a completely new build home. 11 1/2 year old amana started leaking very little pretty much adding moisture on concrete floor in room. Well, it stopped working and bought a new whirlpool and I noticed the leak as concrete was damp under washer?!!! How can it happen with old one then new?
Are you noticing the leak DIRECTLY (you actually see water coming from the washer), or just because the concrete is wet? I mean, perhaps it's not the WASHER itself, but maybe either the water connections TO it, or even a leak of a pipe buried UNDER the concrete? You said it is a new home.
@@dannichols6261 yes new built patio home on slab. However, someone did lol at it and said that it was the rubber foot just leaving imprint on concrete.
Nice video! But why wearing gloves!? Lol jus kidding!! Sharp objects are around I know👍🏽👌 I’m looking to repair a washer for my Sister & niece soon! It’s time to start fixing these appliances when I can! My niece goes through washers & dryers like none other!!! She puts too many clothes in washing machines!!!?!?!!!🤔😤🙄
Mine is only leaking when using it in the large load setting. I first thought it was the drain pipe but it is open and I have replaced it with a larger pipe . Tired of this mess .
Very helpful, but too fast-paced for me. The presenter speaks quickly and many closeup shots of parts are shown so briefly that it's hard to orient oneself to where inside the machine the parts are located. Sure, I can pause and rewind but I don't think I should have to do so.
Thank you so much! I've been dicking around with this Samsung pos for 2 days now. Has to be the drain pump. The entire machine, other than just below the pump is bone dry. But the pump also seems to be dry until it's tipped, and that water could've come from the puddle underneath it. This washer is only 4 years old, and the mount screws literally fell out of the pump mount while trying to get it out. I will never give Samsung another dime. This may have just pushed me over to Apple. Never again.
Marco Reyes, I took it apart, cleaned it up, put a piece of electrical tape around the hose that goes into the water flow area, put it back together and it works great
Marco Reyes I got it fixed. It was dripping water into the tub when it was turned off. It’s not doing it anymore after I put tape around the hose and then put the clamp on it. It’s an old machine and I expected to foul out soon but whatever I did fixed it
the eh "plumbers" who(m) worked on my faucet valves must have had a "sense" of humor. my hot/cold is reversed and not color coded. in fact, the hot turns on counter clockwise and my cold turns on clockwise! my hot and cold are both blue. something smells of fish!
I'm sorry but it might help if you were to start by showing just how to remove the sides of the washer. I may be wrong but I'm assuming most haven't done this before. Sorry but this was a bad vid.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
My machine only leaked if you did a number of loads in a row. I found a drawstring clogging a hose so my guess is that it had to swell a bit before it started leaking This was a zero dollar fix. It can pay to simply look sometimes. But if you need parts, these guys are great. Reasonable prices. Able to return parts with no problem. Keep up the good work.
did you watch it leak did it leak from bottom. mine is doing same
@@brendacalderon9445 yep.
how do you fix it
@@zyeseye6072 I took a hose off, found the string, pulled out the string, put the hose back on. That was it.
I’m having a similar problem, previously it would leak just every now and then but it’s getting more frequent now, but it leaks only when the water drains out. I’d bet something might be partially blocking my drain hose? I have a cat and I wonder if it’s possible that it’s cat hair.
This is the most useful video I've ever watched. Like why isn't everything like this??
exactly , hes right on the mark
Wow, this was super helpful. Thank you. I bought a used washer for my basement and it was leaking as the tub started to fill. I thought it was the water pump and seal, but it turned out to be just the connection of the inlet hose. Seem like a heavy load that rocks the machine will cause this to come loose. Quick 10min fix no additional parts needed! Thank you again!
Thanks for a very well made and informative video! Those hose pliers look awesome..
Thank you I truly appreciate these videos. I am a widower and I have been cheated a couple times out of money for some things I could have done myself myself.
I know this comment is old but I just felt compelled to say I’m so sorry for your loss 😔 Sending an abundance of love your way ❤❤❤
this video saved me 800 USD you earned my subscription and like. was about to buy a new one but found out the issue with my washer was a sock stuck inside my washer pump blocking the way. thank you
Wow, this is a truly excellent video. Short, informative, and easy to understand!
Thank you. You made it far less scary of a proposition to fix one of these. I'll soon be taking a look at my unit :)
My Man's hair is crazy! But he is informative! My Man!
Kudos to my man for standing like a super hero
🤣🤣
Very Good Overview for dealing with a leaking washing machine. Good illustrations, simple to understand language, and DIY FRIENDLY!
Time stamps:
0:00 Intro
0:24 Drain Pump
1:00 Ordering parts
1:27 Door Seal/Clamps if you have a front load washer
2:01 Hoses
3:08 Tub Seals
4:09 Like and Subscribe
4:15 Water Inlet Valve
4:35 Detergent Dispenser
4:58 Flooding Safety Tip
6:14 Outro
This video saved me a service call and who knows what else . Trouble shot the issue and all it was , was the bracket that holds the discharge line came loose and the line flat spotted on the ground from the vibration causing two pin holes to leak from so a huge thanks for the video .
Thanks bud, a new drain pump is what I needed!
Really really good video
HEY where did you get that tool to screw on the hoses?
Regular slip joint pliers work just fine for me. Be careful and don't over tighten.
great job ! right to the point in a well spoken manner !
You're welcome!
This was an impressively informative video
My washing machine flooded my laundry room twice. The first time, I thought my washing machine became off balance during the spin cycle and splashed water everywhere. After the second time my room was flooded, I decided to run it again and closely monitor my washing machine go through it cycles so I would know where the leak was. I found out my drain pipe was clogged. Once the washer machine went in drain/spin cycle, the drain pipe quickly filled up with water and spilled out all over the floor. I used a drain snake/augger to clear the debris but all I did was shove it down the pipe and pack it very dense. I had to buy Flow Easy ™ drain opener to get the lint, cat hair, and dust clump to flow down the pipe and open it up. After waiting 10 minutes, I restarted my washing machine. The water drained into the pipe and all that gunk finally washed down. It cost me about $17.00 for a 30 oz container. That's a lot cheaper than spending hundreds on a plumber!
Glad you were able to get your clogged fixed! If there is anything we can assist you with in the future please let us know.
Chasing down a leak in my whirlpool top loader... got some ideas now, very informative video!! 👌
Good video defining and explaining the various reasons for a leak. You just need to slow it down a bit. Thanks 👍
We do try our best to keep things easy for our customers. If there is anything we can help you with please let us know. Good luck with your repair and let us know how it goes!
Thank you. I appreciate these informative videos.
I love the website. I always use them for any parts.
Just thought I would add that on front loading washers, there are usually small drain holes in the bottom of the rubber front door seal/boot/gasket. Sometimes coins and other debris will get trapped in there and block these drain holes, causing wash water to flood/leak out the front door... 😁
Thank you Very much for this video! It saved me time and $$ Very informative and easy to understand! Awesome!!
So Simply explained Thank You too much
This man is a national Treasure
What type of pliers did you use to tighten the hose, and where are they sold?
Hardware stores :)
Excellent video!
Thanks very well explained👍
Very helpful, thanks
You are very welcome! If there is anything we can help you with in the future please let us know.
This guy is great
You helped me so much today.
Thank you!
No videos for tub seal replacement for top loaders?
Very helpful, thank you!!
Thank you so much !
Very helpful video. Thanks for doing it.
Bro looks like Richard Simmons but fantastic video! 👏
Glad you enjoyed the video. If we can help you in the future please let us know!
Nice video.
Thank you. If there is anything we can help you with in the future please let us know.
Good information
Dude, thank you so much.
Great video
First of all, thanks so much for having this TH-cam channel!! Very informative!! I feel confident that I can repair a few of the issues that may pop up with my old school top load washer. So my old school washer had a big leak in our laundry room which is luckily a cement floor. I called our local repair store that I've used for years, and they came out but were unable to find any leaks when we test ran the machine. They thought maybe it was a leak from my bathroom which was on the other side of the wall of the laundry room. I used it a few times after and it was fine. But after using it the last time, I again had a leak, this time a small one. I tipped over the washer and felt around the inside and bottom of it, but it was bone dry. I am perplexed. None of the hoses were wet, nor was there any water in the adjacent bathroom. Any ideas on how to pinpoint the leak?
It may be that you have to watch it leak and pay attention to what is leaking so you don't miss it drying out.
Thank you
My top load washer only leaks when agitating, anything you think I could check? 🤔
Top load washer. Leaks on fill cycle. Drips on left side on edge like Mabe the hose to fill tub maybe cracked?????? Also drips on rinse cycle. Only when water is sprayed in tube it drips. Fill tub and machine off no drips.
My top load washer keeps filling with water. I won't shut off and go to the next setting(like agitate) and it appears to be leaking just a little bit. Any ideas why?
"floor is full of water, because the washing machines supply line not capped ", can you explain what it means by "supply line is not capped", is there a cap or a screw on the supply line?
If my washer machine is leaking in the bottom would that stop it from spinning I have a general electric three year old, I already changed the water pump it leaks when I put it on the big load what else could it be. ?
On top loaders the bleach feeder could be leaking easiest way to fix is to open the upper rear panel n disconnect the pump that delivers water to the bleach tray, the pump should be the last pump on the right side of the machine looking at the machine from the back.
oh I hope I get this fixed. LOL can't afford service or replacement.
I just saw where mine was leaking underneath the washer as soon as it started to fill with water, caused damage on my floor I hadn’t noticed before.
First check if there was oversudsing. Using a non- HE detergent in an HE Machine will also cause leaking due to oversudsing.
After a cycle finishes, water is entering the tub from the bottom. It's like it's bubbling up. Does this mean the valve between the drum and the drain hose has failed and that water is coming back in?
We just replaced the inlet valve because we had a drip. The drip is gone now.
So when I would wash a lot of clothes and come back an hour or two later to move them to the dryer, and the clothes were wet, we thought it was from the drip. But I think we have the drip going on plus this water bubbling up from the bottom.
I've got a top loader Samsung washing machine,
When it's spinning mitt spills water out,
What's the problem PLS.
*My GE top loader washer has a very slow drip even when NOT in use*
If I were to use it, it would leak much more....
Is it the pump?
Where is it leaking at? It sounds as if the valve could be causing your issue. What is the model number of your washer?
@@appliancepartspros It magically stopped once I pulled the washer away from the way and took off the top plate. I put it back and still no leak. Maybe the electronics got stuck and simply unplugging it from the wall did something??
Changed out drain pump and it still leaked so that wasn’t the problem I guess I got to trouble shoot more
Have you ever heard of washer in agitator cycle fling droplest out of tub and into the interior of washer? Fills up the bottom piece until it finds the lowest hole and runs out onto floor
What is your model number?
My washing machine leaks from a drainage hose while filling water once I start washing leakage stops.So how can solve this problem? Please any Suggestions.
If the serviceman looks like this, I'll trust the video.
If there is anything we can help you with in the future please let us know.
My washer only leaks during rinse drain cycle and then wont spin out...works fine during wash cycle the whole way through...what is causing this?! I have the Amana NTW5500TQ0 and am confused as to what part is exactly having the issue...do happen to know whats going on?
When it is suppose to drain out what does the machine do? Are you able to advance the dial and make it spin out?
My washing machine is leaking from the bottom when I put a small load or a large load.
I have an Amana top load. Help pleas
You will need to check to determine where the water is coming from. It could be a loose or damaged hose, or a damaged part. You will need to replace whichever part is damaged.
My top load washer only leaks during the normal wash cycle, but not during the quick wash cycle. Any ideas
Where is it leaking at? What is the model number of the washer?
So pretty much everything could be the cause
How much cost if washer is leaking
does anyone have a speed queen top loader?
Is there anything we can help you with?
Don't forget to first check for oversudsing.
I don't understand. Just moved into a completely new build home. 11 1/2 year old amana started leaking very little pretty much adding moisture on concrete floor in room. Well, it stopped working and bought a new whirlpool and I noticed the leak as concrete was damp under washer?!!! How can it happen with old one then new?
Are you noticing the leak DIRECTLY (you actually see water coming from the washer), or just because the concrete is wet? I mean, perhaps it's not the WASHER itself, but maybe either the water connections TO it, or even a leak of a pipe buried UNDER the concrete? You said it is a new home.
@@dannichols6261 yes new built patio home on slab. However, someone did lol at it and said that it was the rubber foot just leaving imprint on concrete.
The only one left out is if the pump goes out. If it's not draining the tub, you get centrifugal spill over.
My speed queen leaks during spin cycle water swooshes to top and spills over.
What is the model number of your washer?
You’ll have to replace it.
Whirlpool washing machine inner and outer tub drops when loaded with clothes what could it be?
The suspension on the sides..and inside the the shell and on the outside of the tub
Nice video! But why wearing gloves!? Lol jus kidding!! Sharp objects are around I know👍🏽👌
I’m looking to repair a washer for my Sister & niece soon! It’s time to start fixing these appliances when I can! My niece goes through washers & dryers like none other!!! She puts too many clothes in washing machines!!!?!?!!!🤔😤🙄
Mine is only leaking when using it in the large load setting. I first thought it was the drain pipe but it is open and I have replaced it with a larger pipe . Tired of this mess .
What is the model number of your washer? Where is it leaking at exactly?
my machine is new, but it leaks? First week
Where is it leaking at?
Wow, I definitely have to learn to fix this, so much waste of money when someone fix it and they aren't honest, that just happens to me.😒😒
you so fine😍😍
My Simpson washer machine is leaking
Aye Caramba
How do I spot leaks if I've unplugged it and can't run the cycle!?
You didn't say how to get to the drain pump.
Anyone having problems with the water hitting top of tub and leaking from the back
Where at in the back is it leaking? Is it at the water valve?
Always use stainless steel supply lines!
Very helpful, but too fast-paced for me. The presenter speaks quickly and many closeup shots of parts are shown so briefly that it's hard to orient oneself to where inside the machine the parts are located. Sure, I can pause and rewind but I don't think I should have to do so.
If there is anything we can help you with please let us know.
My machine leaks as soon as it start to wash 😊
Thank you so much! I've been dicking around with this Samsung pos for 2 days now. Has to be the drain pump. The entire machine, other than just below the pump is bone dry. But the pump also seems to be dry until it's tipped, and that water could've come from the puddle underneath it.
This washer is only 4 years old, and the mount screws literally fell out of the pump mount while trying to get it out. I will never give Samsung another dime. This may have just pushed me over to Apple. Never again.
this is no help if you cant get the machine open to service
Can’t trust these hose
Washer is leaking from the area where the water goes in to the tub. The water fill area. Is it the inlet valves? How do I fix it.
Could be the inlet value what other symptoms are happening
Marco Reyes, I took it apart, cleaned it up, put a piece of electrical tape around the hose that goes into the water flow area, put it back together and it works great
Marco Reyes or should I say where the water flows into the tub
@@TheAzSilk could be the pressure.sensor switch or does the lid lock whenever it starts to cycle?
Marco Reyes I got it fixed. It was dripping water into the tub when it was turned off. It’s not doing it anymore after I put tape around the hose and then put the clamp on it. It’s an old machine and I expected to foul out soon but whatever I did fixed it
the eh "plumbers" who(m) worked on my faucet valves must have had a "sense" of humor. my hot/cold is reversed and not color coded. in fact, the hot turns on counter clockwise and my cold turns on clockwise! my hot and cold are both blue. something smells of fish!
I'm sorry for that issue. If there is anything we can help you with please let us know.
हिंदी में भी डब कर दो
I found a dead cat in my machine
I'm sorry but it might help if you were to start by showing just how to remove the sides of the washer. I may be wrong but I'm assuming most haven't done this before. Sorry but this was a bad vid.
I searched for top load only and leaks after half full, not when pump kicks on etc.. Not helpful video.
Who does your hair brillo
fuqui035: Or SOS soap pad maker.
Thank You
You're welcome!