With the amount of subframe damage on the drivers side it should have been replaced. Hammering a frame that much just weakens the whole structure to the point it will fail later.
@@boostedsaleen6146 Yeah but dangerous. Since the majority of crashes happen on front driver side, the structure is already very compromized. I would'nt buy that. Here it would never pass DOT inspection.
@@boostedsaleen6146 some times quick flips are not safe flips gotta remember somebody else will eventually be driving that thing over 60mph with a weakened frame
just asking, but rebending the metal back into alignment would weaken it? makes it more brittle, more prone to crack under stress and lose shape. bend metal and it become fatigued. it needs to be heated and cooled rapidly to harden?
I like watching your videos, but I have to agree with other posters. That work done on the drivers side fender support is sub-par work. This isn't the kind of work your normally putting out.
A quick flip or compressed version? Unfortunately those wheels would be bordering on illegal here in the UK, protruding too much Different rules over there I think . I liked the colour if the car though. No airbags deployed which makes things much easier. 👍
in bad weather the sides of the car become full of mud, because the tires come out of the wheel arches. Not good for the paint because of the stone chips.
Hopefully this winds up as a track car, because it’s not safe for the streets. I would never let my kid drive it with that crumpled left fender support.
Most salvage flips are of this grade. Many are WAY more sketchy. I would rate this average to above average. I didn’t see anything structurally compromised or unsafe. That car will live a happy life, and if it gets wrecked again it will perform at or very near factory in the wreck. I wouldn’t be worried about driving it or putting my kids in it.
The driver's side fender rail and apron are available from Subaru for less than $500. Why not repair it correctly? Calling this a COMPLETE rebuild is inaccurate. Fail.
Plus, considering most "Modern cars" nowadays are over-sized Bud Lite cans. You can see he's "repairing" it with a pair of Vice grips, and some hammers...Not a Million dollar Frame Machine....😳😳😳🥴🥴!!!
Guys you should know your going to get called out.... You half ass did this car and it's not safe to drive.... I should have replaced those parts and you know it......
Amazing. Thank you brothers N. for sharing the rebuild of the Subaru. It was wonderful.🥇
THIS IS NOT THE QUALOTY BUILD IVE SEEN YOU GUYS DO BEFORE, this work is substandard.
You combined efforts saved another decent car that would have otherwise been waste, a car someone will hopefully appreciate and take care of.
Very impressive, great job Niko brothers. Good video stay safe and healthy. Thanks 😊
With the amount of subframe damage on the drivers side it should have been replaced. Hammering a frame that much just weakens the whole structure to the point it will fail later.
Quick flip
@@boostedsaleen6146 Yeah but dangerous. Since the majority of crashes happen on front driver side, the structure is already very compromized. I would'nt buy that. Here it would never pass DOT inspection.
@@boostedsaleen6146 some times quick flips are not safe flips gotta remember somebody else will eventually be driving that thing over 60mph with a weakened frame
Not a crumple zone on that car otherwise I'd recommend a replacement.
Take ur umbrella with you Monday and Tuesday and Wednesday. It looks like we might get some rain from Hurricane IDA.
Seemed like a quick turn around, looked good...........................
Muy bien BRO'S SALUDOS DESDE Honduras 🇭🇳🇭🇳excelente trabajo
Awesome, your skills are off the charts gents!
just asking, but rebending the metal back into alignment would weaken it? makes it more brittle, more prone to crack under stress and lose shape. bend metal and it become fatigued. it needs to be heated and cooled rapidly to harden?
It’s a very common way to fix , by pulling it back into shape, it shouldn’t get more brittle no
Wow, great work. I love these cars they are super fast.
Thank you for sharing
Awesome project, wish you had a long version with explaining as you go! 👍👍🤘🏻🤘🏻
th-cam.com/play/PLU8iVt3Ty0IHTbluyY7mMOTUQX9ZKS9x4.html
They do. Look through there channel videos.😁
From repair to repainting that's really amazing!!!!!!!!!
Great job as usual guys
Really nice work.
Do you manage to sell your vehicles that you have repaired. You Brothers Rock. I enjoy your videos. Regards
Ghetto pay$
Its a lemon, good for ghetto thogh
Still waiting for the Cobra rebuild to come back. What went wrong?
On the sheet metal do you guys buy factory or aftermarket
damn, you make it look so easy, mine is the same car and cant finish it 7 years after... and 12k usd spent on it
Is a good deal if you sell in ghetto
I like watching your videos, but I have to agree with other posters. That work done on the drivers side fender support is sub-par work. This isn't the kind of work your normally putting out.
I'm confused. This is an older video on a car that was done sometime back.....
I tought so. Why in hell rebuild a 2009 car ??
A quick flip or compressed version? Unfortunately those wheels would be bordering on illegal here in the UK, protruding too much
Different rules over there I think . I liked the colour if the car though. No airbags deployed which makes things much easier. 👍
Saludos desde México, excelente trabajo amigos Niko Brothers.
This music reminds me of a long long evening in The Masters... heeeeeeeres your Myrtle Beach Laaaadies!!!
keep up good work
What’s the wheel specs
Awesome car with a lot of muscle in it
Needs a carbon front spliter
Nice job. Want to restore my 2011 Toyota Sienna? Horrible sun damage. 😊
Muy buen trabajo
That is one pretty car!!!
Good one.
tnx for the video
Looks good!
Excellent!!!
Wow thats amazing
in bad weather the sides of the car become full of mud, because the tires come out of the wheel arches. Not good for the paint because of the stone chips.
Nice!
please you had 2 RV 1 you fin but wears the 1 that had engine problems
Great.👍
Website name
nice job
Of course, especially if there is an opportunity to earn some bucks
seminuevo conducido por una dama XD
Nice ✌✌✌
Great job guys! Love the wheels.
👍
The car screams for a wide body kit .. Do an upgrade
Hopefully this winds up as a track car, because it’s not safe for the streets. I would never let my kid drive it with that crumpled left fender support.
Wow. Some sketchy repair work
Haa..!!!! As long as it run and drives straight 💯 👌...!!!...
Most salvage flips are of this grade. Many are WAY more sketchy. I would rate this average to above average.
I didn’t see anything structurally compromised or unsafe. That car will live a happy life, and if it gets wrecked again it will perform at or very near factory in the wreck.
I wouldn’t be worried about driving it or putting my kids in it.
The driver's side fender rail and apron are available from Subaru for less than $500. Why not repair it correctly? Calling this a COMPLETE rebuild is inaccurate. Fail.
Plus, considering most "Modern cars" nowadays are over-sized Bud Lite cans. You can see he's "repairing" it with a pair of Vice grips, and some hammers...Not a Million dollar Frame Machine....😳😳😳🥴🥴!!!
but what is the value of such a car?
Good skills, but why are your wheels rolling backwards as you're driving off down the street? Ha!
Old video
Sorry guys, Im a big fan of yours, but, I must agree with the consensus here, not your best work :(
NOW SELL IT LIKE BRAND NEW FUCKERS !!!!!
Guys you should know your going to get called out.... You half ass did this car and it's not safe to drive.... I should have replaced those parts and you know it......
Looks good !