I do the same thing bro - waive at all the SI boys in the hood and they all mean mug - I wish we had a better community here but I feel you on that man
Dudeeeee I’m going to be 10000% honest I was skimming through the video realized you had a coupe ..just like me …heard your commentary and was like wait a minute this is a good video I’m definitely subscribing and going to give your other vids a look …keep up the work bro it’s looking real nice 😎🤟
The wheel poke looks good! Go with the Intercooler. It’s so damn hot here in Palmdale it will be a huge benefit to the Si. Need to get one for my 2017 Si too! Summer is here and damn it’s 🔥🔥🔥. Hope to see your car in person one of these days….
I’m debating it!! But I gotta take care of this windshield issue first!! It is super hot outside that I don’t even want to drive some days aha I might do the intercooler though I really want the Mishimoto one ! I go to meets here and there man and I’m always driving around the AV for my job! You should spot me sometime!
The alignment is nice to be correct, but there's too much poke for me. The wheels need to be set into the fenders by about 5-10mm. Would look a lot better.
i basically did trial and error. Removed the wheel a couple of times and rotated the arms little by little and used my eyes standing behind the car to analyze it each time aha. its time consuming but I'm a pro now from my previous slammed car lol
I like your window louvers. Most i see bulge out a bit but yours have a me flat look. My buddy has completely flat ones on his subaru that look great but I've never seen something similar in a 10thgen till your car. And thanks for the video. I'm hoping to do my D2s and spc arms this week. Id just prefer a buddy with me cause i know I'm gonna struggle loosening bolts with my arthritis 🤦♂️
@ElPinche97 definitely the sweetest looking visors I've ever seen. I'm doing my springs and rear camber arms right now and the camber arms (Those top bolts) even with the flex head ratcheting wrenches are such a pain to get to
Que tan apretados van los tormilos !!! tendras el dato?? quite los viejos y puse unos camber kit ! solo quiero saber que tan apretados van los otros !!? gracias
Lmao - dude, that’s the DUMBEST name for pliers - I always called them channelocks and my journeyman corrected me the other day - but aside from all that, thanks for the video - I ended up buying the same SPC camber kit and used your install video - thank you!
That’s the exact link I got it from. It says for Base Civic never said that before but it’s the same one. They fit. Even the reviews show Si’s . The camber arms are for every 10th gen civic besides TypeR I believe. you’ll be good.
![[Sub Thai] APT. - ROSÉ & Bruno Mars](http://i.ytimg.com/vi/bYjhzP8x_uc/mqdefault.jpg)
I do the same thing bro - waive at all the SI boys in the hood and they all mean mug - I wish we had a better community here but I feel you on that man
I sometimes get some peace signs now, maybe it’s because my car is more modified now idk 🤷🏽♂️ but still most are rude lol
"Tighten this chingadera right below these chingaderas." 😆
These chingaderas !! 😂😂
Dudeeeee I’m going to be 10000% honest I was skimming through the video realized you had a coupe ..just like me …heard your commentary and was like wait a minute this is a good video I’m definitely subscribing and going to give your other vids a look …keep up the work bro it’s looking real nice 😎🤟
The wheel poke looks good! Go with the Intercooler. It’s so damn hot here in Palmdale it will be a huge benefit to the Si. Need to get one for my 2017 Si too! Summer is here and damn it’s 🔥🔥🔥. Hope to see your car in person one of these days….
I’m debating it!! But I gotta take care of this windshield issue first!! It is super hot outside that I don’t even want to drive some days aha
I might do the intercooler though I really want the Mishimoto one ! I go to meets here and there man and I’m always driving around the AV for my job! You should spot me sometime!
Sick looking Si thumbs 👍!! Keep up the good work!!
The alignment is nice to be correct, but there's too much poke for me. The wheels need to be set into the fenders by about 5-10mm. Would look a lot better.
Sick video foo! I’m curious as to how you “eyeballed” it. I wish you would’ve shown that in the video. Cool none the less though.
i basically did trial and error. Removed the wheel a couple of times and rotated the arms little by little and used my eyes standing behind the car to analyze it each time aha. its time consuming but I'm a pro now from my previous slammed car lol
I like your window louvers. Most i see bulge out a bit but yours have a me flat look. My buddy has completely flat ones on his subaru that look great but I've never seen something similar in a 10thgen till your car. And thanks for the video. I'm hoping to do my D2s and spc arms this week. Id just prefer a buddy with me cause i know I'm gonna struggle loosening bolts with my arthritis 🤦♂️
I feel it! Working on cars with friends is always better aha, and the visors are AVS low profile
@ElPinche97 definitely the sweetest looking visors I've ever seen. I'm doing my springs and rear camber arms right now and the camber arms (Those top bolts) even with the flex head ratcheting wrenches are such a pain to get to
Hell ya !
Bro thanks for this, helped me out a lot. When you adjust the camber, do you have to loosen the small pinch bolts first?
Yes, loosen it up first; make the adjustments then tighten it up last.
Dam windshield f it up
Que tan apretados van los tormilos !!! tendras el dato?? quite los viejos y puse unos camber kit ! solo quiero saber que tan apretados van los otros !!? gracias
Do you adjust the bigger bolt or the small one to get close to 0 camber ?
I just ordered mine - how long did the install take you?
Sorry for late response but about 1 hour
W video
👌 just through it up 16:30
I do sometimes aha but they just look at me like “wtf” aha
@@ElPinche97 I be letting foos know wasup all the time htxgenz got a mf the 65yo whipping the si 😂
Adjustable tongue and groove locking pliers
thats what i needed then aha
Lmao - dude, that’s the DUMBEST name for pliers - I always called them channelocks and my journeyman corrected me the other day - but aside from all that, thanks for the video - I ended up buying the same SPC camber kit and used your install video - thank you!
@@timothymorris9975 I call them pinsas aha Spanish for pliers. But aye hell yeah man! Glad the video helped!!
Did u do the alignment the same day ? Would it be fine if you drove it for a day or two after then took it in for alignment?
I drove it for like a month before getting it aligned haha to let everything settle in plus I had readjusted them a bit more too
All the vehicles I owned my 10th Gen si I got 2 chips in the windshield already 😂
it sucks! thankfully i got mine replaced already, hopefully it doesnt happen again! i wish they made a clear bra for windows
@@ElPinche97 You know I always wondered why no one invented a screen protector for a windshield
@@DANNYFC1 i believe there is one but like in a beta phase, and its probably as expensive as a new damn windshield aha
How do you know where to have them adjusted to have no camber
Do you have to play with it a couple times ?
And how are they holding up ?
gotta play with them! after you got them to your liking take it to an alighment shop to have them perfect it all
Did the shop know how to adjust the Spc arms or you have to show them?
What size ratchets and wrench sockets did you use
3/8 ratchet and 17mm socket
I see you installed them on your si and your on d2 springs, im wanting to install these on my si but the website says wont work for si
That’s the exact link I got it from. It says for Base Civic never said that before but it’s the same one. They fit. Even the reviews show Si’s . The camber arms are for every 10th gen civic besides TypeR I believe. you’ll be good.
Did you ever buy camber arms for the front ?
Coilovers I have come with camber adjustments so makes it easier
Did you ever get an alignment?
Yep I did, rear camber is -1.5
will this 67467 control arms fit on my Honda Civic 2020 sport sedan
They will!
Will this enable you to go negative camber?
Yeahh I believe up to an extra -3 because when you lower your car you get natural camber
What camber did you set your rear at?
Do you have any specific toe arms ?
toe arms I just have the OEM ones. If you're looking to upgrade your tow arms, I suggest the Whiteline ones
Do you know the torque specs for those?
Not sure! I never checked but I just tightened them down good enough