Nice I put that same set on my civic. Except I drilled holes in all 4 rubber joints and tapped them for a grease fitting and designed and 3d printed a rubber boot to cover them to keep grease in and dust out! Hoping it helps them hold up a lil better in my area with all the salt and such.
@@developmentdivision122 Hey man sorry for the late reply! I currently do not as its just a little side hobby I do and I'm not great at design execution. However my control arms are the godspeed ones so where they mount to the knuckle they are different but the part that mounts to the car looks identical. If I get this design smoothed out I wouldnt mind sending you a set!
So on stock cars, do these just wear out since there's no adjustment? My 07 Civic EX coupe is eating tires in the rear because it's toed out really bad. The car has 270K. I'm sure it's time for some.
I think it's actually a Honda issue. Apparently there was a service bulletin (Honda TSB 08-001) but no recall. Though the replacement parts only seem to offer a slight correction and I can visibly tell mine are out so I'm thinking it's more than a few degrees. Tempted to visit the dealer and see if I can get them to replace it for free.
THREADLOCKER..hahahahah ,a coté de la tank a gaz ,mechant clown ,quand on va devissez va falloir devisser avec une torche bleu a cote de la tank hahahaha
Man I’ve been putting off this install for way to long this looks very doable
High quality video man awesome. Maybe I’ll pick up a set. Love my 8th gen
Nice I put that same set on my civic. Except I drilled holes in all 4 rubber joints and tapped them for a grease fitting and designed and 3d printed a rubber boot to cover them to keep grease in and dust out! Hoping it helps them hold up a lil better in my area with all the salt and such.
Do you sell this as a kit?? I’m interested in the boots!!
@@developmentdivision122 Hey man sorry for the late reply! I currently do not as its just a little side hobby I do and I'm not great at design execution. However my control arms are the godspeed ones so where they mount to the knuckle they are different but the part that mounts to the car looks identical. If I get this design smoothed out I wouldnt mind sending you a set!
@@TheGrowOp keep me updated. If you have Instagram, add me @developmentdivision !
So on stock cars, do these just wear out since there's no adjustment? My 07 Civic EX coupe is eating tires in the rear because it's toed out really bad. The car has 270K. I'm sure it's time for some.
I think it's actually a Honda issue. Apparently there was a service bulletin (Honda TSB 08-001) but no recall. Though the replacement parts only seem to offer a slight correction and I can visibly tell mine are out so I'm thinking it's more than a few degrees. Tempted to visit the dealer and see if I can get them to replace it for free.
These are for camber, not toe.
How are these skunk 2s holding up?
Good video, thank you!
Nice work
My rear upper control arm is hitting the frame adter installing lowering springs, how do I fix it?
Cut the frame
Go lower
Brooo we got the same coilovers😎
I am an adjustable control arm factory from China
Adjustable control arm
THREADLOCKER..hahahahah ,a coté de la tank a gaz ,mechant clown ,quand on va devissez va falloir devisser avec une torche bleu a cote de la tank hahahaha