ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2020
- This very nice 2013 F150 is factory stock with 93 octane and a Roush Phase 2 supercharger and Brenspeed calibration. If you are looking for more power and torque this is the ticket. Check out the dyno.
Need an install quote? Email quote@brenspeed.com
Shop www.brenspeed.com for shipping to your door
Links to F150 Roush Superchargers
11-14 www.brenspeed.com/trucks-f-15...
15-17 www.brenspeed.com/trucks-f-15...
18+ www.brenspeed.com/trucks-f-15...
THANKS FOR WATCHING! - ยานยนต์และพาหนะ
Year and 6 months so far. Around 20 k miles with no issues. Runs great smooth and has an amazing amount of power for a daily driver. Thanks again Breenspeed.
Great to hear!
How many miles does the engine have?
How many miles does the engine have?
Truck still runs amazing no problems. A lot of people ask about Mpg of the truck after the supercharger. I think it is the same as before. But its hard not to juice it a bit to hear that twin screw wine. Sometimes I just tell them it gets smiles per gallon. It sure has made a few cameros a gto some mustangs and a few imports second guess what the hell just happened when get pulled by a truck. Thanks again Breenspeed.
AWESOME INFO THANKS!
Damn! been wanting to do this to my 2012 Coyote. AWESOME GAINS!!!
Sweet for sure.
On the Roush Supercharger oil change, at what mileage should it be done? And what brand of oil should be used and how much is required for correct level? Thanks so much for your reply!
Drove the truck over 3 hours home. It runs and drives smooth shifts a little firmer which I really like. When you stab it the sound and torque is amazing. Breenspeed is a first class facility. Thanks to George and thanks to Rylan for installing the kit flawlessly. And thanks to Brent for owning such an awesome place.
Thanks for visiting and I love your truck!
Man that truck makes some good power 👍👍👍
I agree a nice truck and nice mod!
Brenspeed super sleeper too!
Do you have a part # for the 170 thermostat you installed for this application?
10 psi. I'd say regardless of tire size it would still put a smile on your face. And I am sure it would smoke them any time you would like .
Yes on those tires it smokes them pretty easy. THANKS for watching.
I have a 13 with 200k miles very well maintained whats your take on super charging it ?? And is this all with stock internals ?
@@rightwaypowerwash4965 I'm at the same position got 175k on mine with a rear main leaking .other then that runs amazing
Curious what it would make a e85
It's nice to see some clean older trucks. I have been wanting to get in contact with you guys to build my 02 f150 Harley Davidson. Each time I have made contact something must get lost in translation because I don't get any quotes back or and progress moving forward. Total bummer
Jordan, email quote@brenspeed.com and make sure you check your spam folder. Include budget and what you are thinking you want and be sure to include your make and model. We are pretty limited on parts for that truck. THANKS for watching and responses on quotes take about 3-4 days we are super backed up.
I have the same truck and I have the same supercharger, but I don't hear the supercharged sound, why? Knowing that I have a kit pack racing Ford
I want to supercharge my 2011 f150 supercrew with the 5.0 engine.. any idea of a price these days?
Can you upgrade a 2006 4.6L?
How much for my 2014 F150 5.0?
I have a 2013 Ford F-150 5.0 and I want to put a Roush supercharger. Some people say that you have to do some work to the motor before putting it in. I wanted to ask if that is true. The motor does have 150k miles.
As for as a stock truck no that is not true. This is the same supercharger on production trucks. This is the same supercharger they offered a 50 state legal kit on. So if it REQUIRED more mods it would have came with it. I ran it on my stock 13 for a long long time back in the day. Fast truck.
How much improvement would your tune be over the roush tune? I have a 2014 Roush F150.
it is pretty easy to achieve 50+ rwhp with the tune. Plus you get shift upgrades, faster throttle response, and the 100mph speed limiter removed. Here is a link www.brenspeed.com/7015f150r.html
I have a 2011 F-150 5.0 coyote with a K&N high flow cold air intake, which would be better Roush or Whipple supercharger?
I ran a Roush on my 2013 F150 and loved it. I think both would not disappoint. They are great kits.
What can be done about the squealing in the 2013 f-150 brakes. I had my brakes done and a short time later the squeal was back.
You may try different pads. My 13 F150 never ever had that issue.
I have a 2013 that I've really been wanting to supercharge but its coming up on 110k miles. Is that going to put me at too high of a risk to blow the motor with a roush stage 2? Am I better off finding a lower mileage motor to swap in?
We have supercharged more miles than that. As long as it has been maintained you should be fine. We have boosted 150K miles before but like I said oil changes are key. THANKS for the comment.
You can rebuild the engine and Super charge it same time
Don't put one in.
Id do it if i had a back up motor
Do it! if it goes, buy a built one!
How much boost. How much horsepower do you think you would lose with a 24 in wheel on the f150
10 psi of boost. I'd say regardless of tire size the improvement would put a smile on your face. And I am sure it would set them on fire if you'd like.
I have a saleen s331 wondering what parts you have that fit my truck, any other way I can contact you without using email?
Hi those parts are discontinued. Your best bet would be calling Saleen directly in CA. We do not have pulleys, tunes, or cold airs for that truck. Now if you wanted a set of headers or something we can likely get that for you. 574.594.9559 thanks
I have a 2013 roush rt570 with 80 k miles I just got a new transmission on it (the original went out on me on the highway) and the thing misfires pretty badly any advice before I take her to the shop ?
Yes. If this just happened after the trans was out it is very likely they had the flex plate off. When you do that you have to do a crank relearn. This is a very simple process. Not saying this is your issue but 9 out of 10 times you mess with that the crank relearn is needed. They simply plug a device into the OBDII and rev the engine and the system will re-learn. This is required on a coyote clutch/flywheel install and as well on an auto if you remove the flex plate. If the mis fire was going on before they messed with the trans you have another issue.
Aren’t misfires problem end in 2012 ? For the 5.0
The numbers seem kind of low 476hp? I’ve been watching some videos to get an idea of what route I want to go and I’ve been seeing NA calibrations with bolt ons make 400hp on pump I was kind of expecting at least mid 500s
This has the Roush calibration which means you hit the vehicle speed limiter of around 100. That is why the pull is only up to 6000 or else it would keep climbing but the speed limiter shuts it down. Plus on trucks they set it up pretty conservative and you can even run 90 octane. A tune really helps on this particular vehicle over that cal. Now that truck is over 10 years old the calibrations they have today for the newer trucks are turned up a lot more.
How much does something like that run these days?
Hi the links to the superchargers are in the video description. That will give you up to date pricing. If you are looking to come to Indiana for an install you would get that current price by emailing quote@brenspeed.com
Why u chose roush over whipple? Any particular reason?
We use both a lot it really comes down to the clients personal preference.
What do these trucks dyno on the roush tune?
Maybe about 40 less rwhp with the Roush tune.
Is the Roush standard R2300 kit worth it? Its the cheapest at $6,000
Yes I ran it on my 13 F150, and then my 19 F150. Great kits. If I didn't like it I would not use it.
@@BrenspeedEngineering Thanks for the feedback🫶🏻 I have a '12 with 78k on the dash, so the 5.0 is just scratching the surface of being broken in. Just trying to find the best budget setup, then look into going with bigger and better
what effect does 87 oct have
You would not run 87 octane on a supercharger. The octane typically can not handle the boost.
Thank you
Boosted F150, what's not to love.
I hear that!
@@BrenspeedEngineering Hi brenspeed, I'm new to the channel and enjoy the info that you guys offer, keep up the great work! But I have a question...I'm new to working on cars and I just bought me a completely stock 2014 Mustang GT, and am looking to get a Whipple Stage 3 supercharger added to it. I don't want to blow the motor, so was curious what upgrades do I need to add to the engine prior to installaion of the supercharger in order for the engine to run without any issues? P.S. I want to supe it up but keep it as a daily driver. Thanks!
How much to do my truck
Parts are listed on www.brenspeed.com for shipping to your door. Install quote in Indiana can be received by emailing quote@brenspeed.com thank you. Supercharger installs typically run around $1500 but if you need an exact number you can email that address.
How much does it cost to have someone install it?
Prices change all the time but typically $1400-$1600 for an intercooled supercharger install and dyno test with graphs provided. Of course all places charge different prices and not everybody has a dyno so you would need to get an exact quote from whoever you are looking at to install it. Those prices above are roughly our prices currently Aug 2021.
@@BrenspeedEngineering how much is the supercharger on this truck and do you recommend buying it off of a certain place that has good deals?
How much
Link to the parts is in the video description that gives you current part pricing. Install prices can be had by emailing quote@brenspeed.com
Is 100k miles too late to put this on
No not at all. A well maintained engine with proper oil changes will handle boost well into the 100k mark no problem.
@@BrenspeedEngineering I’m not the original owner and I know it used to belong to a construction company, but I’ve never had problems with it. The only issue is that rear main seal started leaking recently. I’ve tried to take good care of it over the last 15ish thousand miles. Glad to know there’s still a chance
Do it
Thanks for watching!
Idk if i want to fuck up my great engine.
Your good! Thanks for watching!
I have an 09' 4.6 3v, I want to Replace my exhaust with Cats. What do you Suggest.
I would go with something like this www.brenspeed.com/xfm26.html
@@BrenspeedEngineering Mustang exhaust fits?
I will be calling your shop today, I need alot of parts
@@mw4382 Oh sorry I thought you meant 09 Mustang. Sorry we do not have what you are looking for if you have an 09 F150.
@@BrenspeedEngineering Would Mustang Cams work in my Truck?