ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2023
- Quick guide on easily painting HueForge stl in bambu studio.
Also information using 1 AMS with more then 4 colors.
Links below-
Hue Forger :
hornandrhode.myshopify.com/
Bambu Stidio :
bambulab.com/en/download/studio - แนวปฏิบัติและการใช้ชีวิต
Great video thanks! Blows my mind can use 1 ams and just reload with more than 4 colors. Love it.
Hi, really very helpful video to get a jump start without being overwhelmed by multiple options :) thx a lot!
I did not know about height range modifiers - a much easier way than using the layer slider on Preview.
A few good tips. Thank You
great vid, helped me out a lot as i am clueless
That's so much easier than what I was doing! 😅
gracias compañero un abrazo me ayudaste infinito
Pedantic mode - the white was at 3.24 not 4.24. Good tutorial - learned some new stuff about Bambu Studio too. Thanks!
smart way to get five colors!
Any idea why my shader profile is blank? My only option is "None", so it just defaults to grayscale when I load in an image.
Great video! But for white you typed 4.24 instead of 3.24.
When I use the .08 profile, it automatically adds support, how do I stop support from printing when using .08mm?
You can turn supports off under the support tab.
But there should be no supports added to these
@@xile6 Figured it out, I choose the .08 Extra Fine settings then tweaked the settings, it adds the support automatically. I chose .16 Optimal settings and tweaked the settings and I no longer see the support. Thanks for making this how to vid, it helped a lot.
Can you do a lithophane tutorial? Can't find any yet.
I can. But are you looking to make one or simpky color it? Because the multicolor ones should give you one stl per color. I use lithophanemaker.com/
@xile6 I would like to color them. I know how to create lithos bot sure how to color them with this program. Creator said their would be a tutorial down the line, but I'm impatient. Lol.
There is a Describe button that is hidden behind your Model Geometry Dock that does what your cheatsheet does.
Thanx ill check it outm just started using the software a few days ago
The add button is gone and I literally cannot figure out how to add the next layer of color.
Add should be next to filament and the - button.
Have you tried restarting the app? Or dragging that divider over to the right more
I’m following this to a T but keep getting “Serious warning conflicts of gcode paths” where am I going wrong
They only time ive gotten that error. Is when the prime tower was to close to the file. Or you have a multi body part that is overlapping.
With hueforge. There should be no overlapping bodies.
Do you have a tip I only have a minus but not a plus in the layers. I cannot add layers. Neither in Bambu nor in orca slicer
I am not sure on that. Do you have more then one filament added?
@@xile6 yes i have 4 filaments but no plus. I thought it might be an issue with the screen resolution. But I just cannot see a plus
@@Wasser-fz9ub yea sorry no clue on that.
Can you drag the divider over to see if it pops up
@@xile6 I tried but that doesn't work sadly
you have to select layers, the plus will be on the bottom.
can you increase the thickness beneath?
Not 100% sure. I think hug forge has been update to adjust the firsr color thickness
what version of bambu studio has this height range modifiers?
1.6 and above
@@xile6 i updated and now i got the height range modifier but i only see the "-" and no "+" like you have to add more changes...
@@Maxl51 that is most likely due to your screen resolution. Ive seem a hand full or people have this problem. See if yoh can change it real quick. Or right click the stuido icon. Then properties > compatibility > dpi override i believe
@@xile6 i will try ! thanks! its on full screen but in german language and maybe the text is to wide now
Do you have a tip? The object is extremely warping.
Warping as in lifting up?
If so you might have to adjust your bed temps or aux fan speed.
@@xile6 yes it's lifting. I don't have a part cc cooling fan. Which temperature do you suggest for the bef
@@Wasser-fz9ub i normally do 55c for pla bed temps. And normally use a texturesheet
Im trying to figure out the point of this program, doesnt bambu studio do this already ? Plus the ams . Am i missing something?
Bambu lab does not make these. Hugforge turn photos into printable color 2.5d models. Since they are different colors at different lager heigh. At the end of the day it ia simply 3d printed art
@xile6 so I can upload any photo into this program and turn it into 3d layered art ?
@@xslayerizedx pretty much. It is like a color Lithophane without needing light or a multicolor printer. Sincs hugforge is printed layer on top of layer. You can manually switch filaments.
@xile6 I have a bambu labs x1 carbon with an ams . If I wanted to to an 8 color print with swapping . Can I put that into hueforges code to run on bambu studio or how does that work. I'm on hue forges sit right now ready to buy the program but I gotta learn more. Youd think there would be a free trial.
@@xslayerizedx well the creator made it so all the pricing is just licensing. So the cheap version is the same as the high prices one. But a trial would be nice. As for your question. Since its all done at different layer height. You can simply swap them out once the bottom has fnished. Pair 1 with 5, 2 with 6, 3 with 7, 4 with 8. So the print would use slot 1,2,3,4 then repet and use 1,2,3,4 that are different colors