Can you really get FREE stuff from Bambu Lab's Maker World?
ฝัง
- เผยแพร่เมื่อ 27 ก.พ. 2024
- Is Maker World better than Printables for redeeming points? We're going to find out!
Help support this channel! / needitmakeit
Through a twist of fate (Thanks Martin) I started to post my designs on Maker World and to my surprise, I started to generate points quickly. Having already gone through the process of redeeming points on Printables, I thought that it couldn't hurt to try out Makerworld as well. I had no expectations and I thought it would be about the same amount of cost to me as Printables was. Well I have to say that I was wrong about that, but I don't want to spoil it for you, check out the video to find out how good this site can really be to it's good designers and maybe it can be just as good to you as well.
Makerworld seems to have distribution centers around the world for their products and that also means that shipping time was quite a bit different than Prusa as well.
Industrial Phone stand (Josh-3D) - Nice work! This is a beauty.
makerworld.com/en/models/2026...
Another way to support this channel indirectly is through my Amazon affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
shrsl.com/4aghz
CREALITY PRINTERS
shrsl.com/4aghy
CREALITY HYPER PLA
shrsl.com/4aghn
#bambu
#makerworld
#3dprinting - แนวปฏิบัติและการใช้ชีวิต
What I really like is him talking about Bambu whole video, and then printing things on K1😂
I don't like to promote any one brand, though the Bambu printers are really well designed and built. I've just struggled with PETG on them. I've moved my X1C to the basement to free up some space in my shop as well, and so that I can print while I record, printers running while recording are bad for audio-quality.
@@NeedItMakeIt I print almost exclusively PETG in my P1S, A1's and K1 Max. Bed adhesion can be a pain to clean up, but otherwise they all consistently nail it unless I neglect to clean the bed one too many times. K1 Max can be very sensitive about that (textured PEI) but all of them share that problem. So I've made it a point to wipe the bed after each print with a squirt of Simple Green. I do often print with the K1 door and lid on, and that has not caused a problem with PETG, and I've done that with the P1S sometimes as well, but my lid is always two inches elevated so not the same thing. My wife seems to have a penchant for clogging her A1 with her glittery, glowy PLA filaments.
@@NeedItMakeItWhat plate are you using? Seems like everyone is moving over to the textured pei sheet.
@@ToddRafferty I use mainly Wham Bam and the stock PEI plates. I have one textured as well, but I don't always want the textured look. It does make a difference for adhesion, it seems to hold onto that first layer better without glue. I'm not so sure that it would working on a heavy print with lots of walls and infill without using glue stick still though.
Don't worry the A1 will immolate itself anytime now so you wont have to worry about clogs with it 😂@@Immolate62
So thank you for this video! Since watching it I've been a busy bee on makerworld, and just earned a 2nd AMS, and a ton of filament. Of course they JUST revamped the system with BOOSTs so we'll see how that goes. But with just one model I made over $600 in $40 gift cards, if I hadn't bought a bunch of filament and plates and the AMS I could have literally bought a whole other printer. So far loving Makerworld
Perfect, through a twist of fate I ended up switching to MW and I think I'm about the 1K mark for cards, that's Canadian, and I have quite a few models on there now. With the new system the points have slowed quite a bit, but they're still coming, so that's okay, and with truly free shipping, it's still worth using them over any other side IMO. I'm glad it worked out well for you, that's great progress with one model, it seems like it could be in the trend section with that level of points!
Do you mind linking me to that one model. I'd love to see it. Thanks
@@billbyrd9845 That's the Rod Sloth, you can find it on Printables and on Maker World as well
In the US we still have the 3 filament spools. We also have spools of filament available on the Bambu lab maker world website so you can get it directly from the store.
Damn, getting so much value out of the shop is insanely good. It's so great seeing it work like that.
Wow I had no idea you were in Ontario (let alone Canada) as well! Super cool to find local 3D printing TH-camrs
I keep my Eh's to a minimum, but yes sir southern Ontario. I'm starting to see quite a few Canadian channels pop up, we're getting better at making content, or maybe we need that 2nd job to afford the food?
@@NeedItMakeIt 2nd maybe third soon :( lol also hello from southern Ont. :P
Nice work. Loved the red filament.
Is it better to redeem for the gift certificates as you go or save up points to get enough vouchers for what you want?
You mentioned that your change was saved on one of the GC. Does that mean you have one left w/ that amount and the system erases the others or do you have to figure out which gc the change is on?
I haven't opened up the red yet, I'm waiting for the right project, but the filament looks good so far, Black and Grey are printing nice, no complaints.
If it were me, I'd redeem as soon as I had enough points to cash in for free shipping. If you're saving for an AMS or a printer and it's slow going, I suppose I'd wait as long as possible. I have a feeling that Bambu will be changing this setup because it seems like it is costing them a lot. They must be making a push to have as many people jump over to their platform and then they'll make the adjustment, that's my guess, but time will tell.
I have one GC left with some money left on it, but I don't know which it is. I still have each of them listed so it seems fairly straight forward to go back through each of them to get the right one.
Glad everything went well! Excellent video!
As for me, I already have enough points to get a Bambu Lab A1 mini, but since I live in Latin America, I think it will be impossible to obtain it...
Do you have any info about this matter?? Thanks in advance!!
The anti-vibration feet are LEGIT, they make the printer wobble insanely but it's SILENT while doing so, it's almost otherworldly lol. Just make sure to re-run the calibration so it can do it's vibration test and noise-cancelling test after installing them.
Did it not come with those in the past?
@@pperry6715 no
@@pperry6715 it comes with basic silicon or rubber feet, but you can actually print your own anti-vibration feet from TPU, they don't block the exact design and others from makerworld. they were just cheaper than buying a TPU spool lol
i started saving coupons around christmas and have ordered a a1mini combo 3 weeks ago.
Currently i make enough points per week to collect 2-3 coupons without uploading new designs so happy days for me i guess..
Hopefully will have enough coupons by the time the a1 will be re released to get it for free.
from then on i will use it to get some extra ams units for my p1p because i don't have any more room for new printers :D
Nice! From what I've heard so far from people, they're pretty happy in general with Maker World, I haven't really heard anything bad so far. I hope it can last so we can redeem regularly and feed our obsessions.
I have a video where I tested printing on top of my X1C, and the results were quite good, not perfect, but with some vibration feet, maybe it would be nearly perfect.
Great to hear that you're benefiting from it, not that long ago everyone was uploading to Thingiverse, but we had a lot of junk there it seemed.
How do you earn points without posting your own models?
@@maks_not_max You can setup print profiles, meaning that you print the parts and then you come up with a good bunch of settings. You can also print models and rate them, at least that's how it works on Printables. I only generate points by uploading parts to print, I don't do the other things, they tend to be quite time-consuming unless you have a good clean process in place.
@@maks_not_max creating printprofiles..
I upload a lot of printprofiles of models who are not mine and i do state it in the description. A lot of small models are not a1mini friendly and i upload mostly profiles of a1 mini...
Since my first comment here i made already enough points to get another a1mini and that just in 3 weeks without having to upload anything..
@@maks_not_max you don't.
Wow that's some great rewards! Definitely worthwhile to contribute to Maker World. It's a loss leader strategy for sure, but that's how they'll populate the store with quality.
Maybe with some pressure, Printables will make some changes to be more competitive, but for now, rewarding people for their good work seems like a pretty good idea. When people steal other people's work and remix with little to no effort, that's not such a great part of it. There should be more strict rules on that. I have someone on Creality Print that added "K1" to the part and that was it, but they at least left my logo on it, provided attribution and linked my video.
@@NeedItMakeIt Yeah the fact the team actually took down the offending design was great. Really important for building a good maker community.
@@802Garage I've had some experiences with Ebay and it did not work out like this at all, they continue to allow people to sell my designs from my videos, even using images from my videos to sell their products. The final solution was to not post the newer versions of the model, if they want to sell it, they're selling the less functional one.
What do you think constitutes a good remix? Is there anything in writing that's clear for everyone to see, or is any change at all a remix and I should just get over it?
@@NeedItMakeIt I think it depends on the license of the original design. If it was put up as fully open source with no attribution required, people can do whatever they want, even if it is being sold in some form. If it was put up with a non-commercial license, meaning any derivatives should only be personal use and not sold for profit, I don't think any form of remix is acceptable. If commercial licensing is allowed, but only with attribution and modification, then I believe the remix should add, remove, or change a function of the device In order to be sold without issue. Oviously that's a super gray area though. So I think put very simply, non-commercial license, it cannot be sold in any form altered or not they have to design completely from scratch, even if they copy your design. Commercial license, it can pretty much be sold in any form even if someone straight up steals it because what are you going to do about it? In a case like this, just removing a logo, obviously that's bogus. There is nothing you can do to stop someone from completely copying your design in a case like this, but if you can prove that they literally used your file or if the part is essentially identical and came later, I think websites should take it down as copyright infringement. I needed a Bowdoin tube clip for example that was not the size that came with my printer and not the size of any files I could find online, so I designed one completely from scratch. It looks nearly identical to many others, but I started with a raw sketch in Fusion 360. Functionally the same as other designs, but clearly not stolen. If I had taken someone else's file, lowered the height by half a millimeter, and then wanted to sell it, I still think that would be bogus, but obviously it's hard to go after something like that. With more complicated designs it's more obvious.
Great video like always. When I redeemed my first gift card I didn't had to wait 8 business days, I received the coupon code instantly. And I noticed I had received a system message few days earlier notifying me that my makerworld points had been reviewed. I really like this approach of reviewing the account points just before having enough points to redeem a gift card. This makes the whole experience much more enjoyable for someone like me who doesn't like to wait ^^
When did you start uploading? Just interested how long it took you to get all the points.
I think about 3 months ago. I should say that I think I have a slight leg up because of my YT channel. I didn't really intend it that way, normally I just make designs to help people solve problems and post them for free, this is a nice kick-back though.
Thank you for this Video.
I already uploaded some model there. I wanna know how I can get people to find and download my models because for now I just got a few (maybe 2) downloads per model.
If you have a TH-cam channel that's a good way, if not, learn how to create a GIF and use that as one of your images, it'll help to draw some attention. Aside from that, a bit of luck and some skill, like anything.
@@NeedItMakeIt Thanks, I never thought about including GIFs before
@@an_o_ia If only they weren't so grainy, but at least they do a good job of showing that it is that your print can do. If you can make a video to go with it and post it to YT that's good as well.
Looked like a nice tool - Gave you a follow on MW.
Do you make tuned filament profiles for each of your machine/filament combinations? No one seems to ever mention if they do or not, so the quality of a print in a video becomes kind of meaningless to me. I've found that fit & finish, corner sharpness, and layer lines will vary depending on whether or not you use the proper flow ratio, max volumetric speed, and pressure advance values. Pretty easy to find out the proper settings to use for those (especially in OrcaSlicer) and you only need to do it once for each brand and type of filament (though it can be good to do per-color as well, but I don't go that far). Of course, these settings do vary from printer to printer (at least from model to model) as well.
I spoke too soon, 5 seconds later in the video you mention that you may have gotten even better results if you took the time to calibrate. :)
The nice thing is, if you use the AMS and Bambu's software, (maybeeee Orca can read from the AMS) soon as you drop that new spool in there, it configures it via the RFID chips for your specific attached machine to what is factory tested/suggested for flow rate, bed temp, tip temps, speed, etc. That alone makes the price of using their filament worth it to me. Especially when they have their bulk savings day where you can pick up a 1kg reel for 16-19$ depending on what it is.
At what speed you print with PETG? those are good looking results!
It looks like for the walls it's in the range of 230-240mm/s infill is quite a bit faster.
Good review from Canada, Saskatchewan (former Ontario). Printables is much better for someone in EU (shipping and customs). Same idea when buying a Prusa printer from North America, it is very expensive. This is why Makerworld is much better/cheaper for us. Same for buying Bambu Lab printers and accessories/supply.
Thanks! I can't complain but it would be great if Printables had a distribution center at least in the US, I think that may be what they're trying to do with Printed Solid, they sell filament from there, but don't provide it for redemption purposes for some reason. It's tough to beat their quality and I'd prefer to use products on occasion from other countries. Ideally Canada, but that's not really a thing anymore.
Sask eh? I'm in Regina. Ontario a lifetime ago...
Can confim though. I cross-loaded most of my models from Printables, wasn't really trying to get anything, but Makerworld feels a bit Wild-West right now. My free A1 Mini just showed up, took 9 gift cards. $120 spool of PATH-CF and three spools of PLA took 5 more cards. Same-ish models on Printables got some free spools(still have to pay shipping from Czech Republic) but only 1/4 the way to a free printer.
@@mobiobione You're ahead of me by a longshot, nice work! I'm waiting for Bambu's newest printer, my guess is that it'll be able to compete with the XL, but I guess time will tell, knowing them they're doing things differently than everyone else and it could surprise us.
@@mobiobione Same! ;)
The most impressive parts of it is printing with K1 max with no ringing/ghosting. My K1 is a ringing machine lol
10:50 yea the number one reason why it was created is because they copied Prusas website and needed users to make it worthwhile for anyone to use it.
these programs are just there to attract users to your website and thats it.
beside this the reason why this works for Bambulabs is because China is still considered a developing nation and is benefiting from insanely cheap international shipping rates thanks to that, on top of that the CPP also subsidizes the little shipping cost that remains which is the main reason why everything shipped from China is so cheap.
Prusa is only like a 4 hour drive away from me and yet getting something shipped from them costs more than getting it shipped from China.
There are some people still benefiting from Pintables, but it's not justifiable any longer for me to use them especially when I can truly get filament and parts for free. Of course no matter which way you look at it, the company is benefiting from our work in the sales of filament and the more designs we post the more they are printed etc. I also expect that they're making a big push to get people hooked, long-term I'm not sure what it will look like, but for the time being it's the place to be posting your work, that or maybe Etsy or similar.
I can see your point, they have an advantage over other countries, which I suppose is why just about everything seems to be made in China these days. I just purchased some metric Allen keys and they were made in the Czech, but I paid about 4X the price for them. They look amazing, and I hope they last.
I'm all about competition so we'll see what Printables does to compete, so far I haven't seen much aside from them bringing back the 3 spool combo.
@@NeedItMakeIt the 3 spools combo not being there is a temporary thing as they currently have so much demand for their filament that they cant produce enough even with the new filament line they just recently build.
beside this Printables cant compete with free shipping and that was never the point of all of this.
the entire reason why printables exists is that there was no good platform for 3d models as Thinigverse has been unusable for years at that point.
Of course with all the subsidies and cheap labor its easy for bambulabs to undercut anything especially when they literally almost made a one to one copy from printables and just changed the design a tiny bit to make it less obvious.
One issue with the first part about copying designs I've seen is where someone copys your design, posts it, claims against yours, and yours gets taken down
That's pretty sneaky, they'd have to supply proof and if yours pre-dates theirs it's not likely going to be easy for them. I'll give you a little tip as well. I hide my logo within the models, they're not visible from the outside, and they're very thin as well, it's not going to be something that's easy to see unless you look at the correct angle in x-ray mode and are also quite zoomed in. MW has changed their points program quite a bit and it's not as good for creators so far, but we'll see where it ends up. They reached out to me to ask me if I'd be willing to work with them on a video, but I think at this point I will not be doing that unless something changes.
This is how I've gotten a printer, a bunch of accessories and filament for free. Take advantage of it, its worth it.
How long did it take you to get enough for a printer
@@cryptorial I got featured twice so not that long honestly
@@NeoKoiPrints Nice! Keep it up.
This is how grocery stores work next time your there notice how the staples i.e. milk bread and so on are furthest from the door making you pass all the products, also this is why every so often they change the products to different isles making you look in every damn isle in the place smart marketing for sure!
That's also how IKEA is build, With the arrows on the Floor and so on
I'm new to Maker World. I did a search there for models by NeedItMakeIt and nothing came up. How can I see your models there? Thank you.
Sure, if you do the search like you did, you'll see an area just at the top which says 'Models' and then 'Users' click on the Users section and you'll see my page. There are no spaces just like you have there. MakerWorld recently changed their reward system, it's not quite as good for bigger creators, and apparently better for smaller ones, in any case, it's still working it just seems to be accumulating points a bit slower than before.
@@NeedItMakeIt Does becoming a patreon make it possible for me to email you?
You can certainly do that, you can also email me at needitmakeit@gmail.com.
@@NeedItMakeIt Oh, thank you. I didn't expect you to reveal your email address. I've got a few projects that I think are pretty good and thought I'd send you some pics from time to time. For me, it's all about function. I'm not into printing trinkets.
@@billbyrd9845 Well now that you mentioned function you have my attention! I'll have a look when you have a chance to send some pics over.
sidebar: Yes you can use the gift card for shipping and buying anything from the store, best thing is it keeps all other discounts, so any buy 2 or buy 3 discounts on filament are kept and this is off of the total like cash. I was worried they might cancel out any discounts but they stayed.
I know Makerworld had a problem for a while with both trolls and people abusing the site uploading garbage stolen files without attribution just to earn points, i think anyone with a high point value is probably going to get flagged like this, i only had 490 points when I redeemed and didn't get flagged.
That's definitely a better deal, let's see how long it sticks around though... hopefully printables will loosen their grip on the rewards stuff before all the value on Maker World goes away.. but I suppose we'll just have to wait and see
My first two printers were from Prusa, they were expensive for what their capabilities were at the time but I liked their support and their dedication to open source. I don't make money on the printers, they are just for personal use and gifts I make people, I've never been able to make money on them. I'm sad that I'm considering a printer from Bambu now but as I live in the US Prusa is just too expensive for me. I'd use their filament if shipping was cheaper and buy their printers if they had a support hub and warehouse in the US but shipping just kills me.
I think Prusa still has a good name, and they've remained good printers over time, and considering that they were constructed from printed parts, it's pretty impressive.
My feeling is that with some pressure they'll make the appropriate adjustments and should become more competitive. Maker World seems to be so much more advantageous to use than Printables unless maybe you live in the EU. I am still a bit shocked that I didn't need to pay for anything, and also I have cashed in again for 3 more spools, but this time of PETG-CF. I also think that Maker World will begin to change as more people jump to their platform.
There are some more companies coming up which are very competitive, one is FLSUN, with what may be the fastest printers to-date and QIDI, with printers that perform well and have heated chambers. Lots of other companies are following the COREXY format as well, so we'll see what they come out with, it should be interesting to see.
After years of using printables point system, I managed to rack up a stagering 1500 points... In under a year of using makerworld, I saved up enough to buy a new printer. Will it stay like this forever? Lets hope.
Unless Printables does something dramatic soon, they'll lose everyone. That's awesome BTW, which printer did you get? They're making their filament cheaper as well by giving everyone the membership rates, they must be printing money, it seems like they're just giving the stuff away.
@@NeedItMakeIt I could have clarified more. I saved up enough to buy a printer. But I didn't. I use my 360 bucks in giftcards on all filament and spare parts. But I could have bought an a1 mini.
what a fantastic idea great design great place to keep you mobile phone just perfect 📱👍
It's a nice little unit, the middle is open and you can swipe up easily and there is room for the charging cable. It's well thought out and to me it looks really good. I like this style, I may have to adopt some of this style for my own prints.
TPU feet would be really nice on those phone mounts.
I have some but it's white... terrible. I'll order some gray or black. I was also thinking about using silicone and spreading it on the bottoms. Or maybe those rubber stick on pads?
Actually, I've used hot glue for making sticky feet on phone stands.... it works really well too. @@NeedItMakeIt
@@NeedItMakeIt
You could probably make a mould for placing silicone on the bottom of the feet. It would require accurate measurement of the silicone, though, to do well.
Otherwise it would be a good use case for two-filament printing - if your printer can handle TPU in this case, which the Bambu Lab AMS cannot (at least officially).
3D printing isn’t quite there yet, but at least it is progressing.
I really like MakerWorld so far, I was able to get enough points for one gift card (working on #2), and got myself a textured PEI plate. Cost me like $8 cause I was short with only one gift card. *Free is nice though!
As more people jump over, it should continue to grow as well. I think they'll change the way their points work, because it seems as through they would be losing money on it. I can't be sure, but I've now cashed in for 7 cards, and I've only posted I think three models. It's great to not have to worry about conserving filament like I was though.
So far I've only seen a couple of negative thoughts on the MW process, they relate more to distrust and sharing of information etc.
I only own Prusa, but it's sad how Bamboo feels like a more well-established company that's been around a lot longer than Prusa, despite Prusa being around for 10 years. I don't feel like I matter to Prusa.
Wow. Bambu labs crushing it on another level than just technical sophistication. The Chinese beating the Czech??? America not even on the field unless you could formlabs. The 21st century is gonna be weird
It certainly creates a big incentive to switch over. It's a bit messy with all of this print profile stuff, I'm not into that myself. But it's nice at least to get something back for putting all of the work into designing something and going through the testing and tweaking processes. I figure that Prusa will make the appropriate adjustments to be more competitive.
@@NeedItMakeIt i uploaded a few of my models after watching your video. I totally agree on the print profile, its an attempt at 3d printing for dummies but not being a dummy i never use it. Too much time and energy investment NOT to set up the profile myself.
@@legionjames1822 I tried it for the first time yesterday and it was a little bit annoying, having to upload images of the final prints and all, but I guess that's to prevent people from using bots and makes it so one needs to truly test the prints first. A solid setup, just not really worth the time unless you can make the process more efficient, like printing in batches.
Are you saying you got all that stuff because of print ideas you sent it to Maker's World? I realize that the standard is probably quite high, but still. That seems quite generous. By the way, the usual Subscribe button is not showing on my screen, so I just clicked the little bell. I can't imagine why they would remove the button.
That's correct, they've since changed the formula it seems in favor of helping to promote smaller creators with good ideas, but it still works. I think I've been on for about 5 months now and I have been able to accumulate nearly 1K CAD for filament and parts. We'll see how much their changes impact things, since it seems to have slowed a bit. The way it seems to work is that we post designs, people download them, and they need the filament and printers to do so. Bambu gets some of those sales, I'm making assumptions, since I don't have the data to back it up.
@@NeedItMakeIt Thank you for the response. That's very encouraging and I can see how it's a win/win.
@@billbyrd9845 The tradeoff of course is that you're putting your hard work out there for anyone to take, and on occasion your parts will be taken without permission. It has happened to me, but it's pretty rate.
@@NeedItMakeIt Yep. Nothing's perfect.
what is the rate of points you get?
It seems to be in the range of 25+ / day. Since making the video I was able to cash in again, but this time they were low on stock for PETG, so I ended up going with one PETG Basic Black, and the others are PETG-CF
Makerworld is awesome. Im a beginner modeler and Ive still made almost $1000 since October.
Holy Moley! Nice going. I think I've been on for 2 months now, but that's great. Is your name on Maker World the same as above, I'll check out some of your work.
I still think that the plan is to get everyone to jump over and then stop giving as much away, but we make hay while the sun shines as they say.
@@NeedItMakeIt Thanks. It's just KiCkiN on MW. But my "skill" is lacking and it shows, especially compared to someone with your skill. I'm trying to learn more every day though. Actually my wife and I are both learning and some of the models were done by her.
Most of our models are just simple "filament saving" ammo cases that we make for local hunting clubs. The clubs get together and let disabled children/teens/adults come and hunt/shoot and teach them about the outdoors in general. They'll then add the person's name to our case designs and let them keep the cases to take home with them. It's a pretty neat program.
I fully agree with you about MW's plan. I don't think they'll be able to sustain this level of free items forever. I do hope I'm wrong though.
@@KiCkiN828 Well, if it has a function, I like it. It sounds like a pretty good project and adds value to people's lives. Which software are you two using?
I've been hoping to hear some stories from people about any negatives, but so far I haven't seen any come in.. maybe there just aren't too many of them.
Keep it up, as far as my skill level, I've been doing this for a very long time, but I know some people that can completely blow me away, best thing to do to start out is to keep it as simple as possible, get the function right and then work on the form a bit to refine it. That's something I know I struggle with sometimes, we want to make it look good from the start, but it ends up consuming so much time if the structure needs to be adjusted later on.
@@NeedItMakeIt We use Onshape and Fusion. I prefer Fusion and my wife prefers Onshape.
As far as MW negatives, I haven't really had any personally. But a friend of mine got banned for a month. BL accused him of using bots for downloads. What's odd is that his account wasn't even a week old, with just 1 model, and less than 10 downloads. I cant say with certainty that he was innocent, but I don't see him doing that, let alone for just a few downloads. He didn't even have any points yet. Before his month ban was up he was perma-banned and given the same reason. He submitted a ticket and they refused to reverse the decision stating that they knew that he was using bots and he violated their terms.
Thanks, that's great advice, and I need to follow that flow. Very often Ill focus on the looks first and then so wrapped up into that, that I lack on the actual function part. Then Ill get so frustrated at the time I lost already, I'll give up or start over.
It’s fine and nice as long as you live in somewhere that despite being among the ten greatest economies of the world is classified by the company as “Other” and not supported in any form.
I can't say for certain, but when looking at Global (Other) free shipping for standard shipping times is still free over the minimum value. The only way to truly find out if it works is to plug in your address and see what it says. Have you experienced issues from Maker World for free shipping?
@@NeedItMakeIt No. We do not exist! Global just has another eight destinations.
@@VGPbr
When you order from their online shop it is global, so far as I know.
New Zealand isn’t anywhere near the top of the economic rankings, and we’re adjacent to penguins rather than any of the larger countries.
0:30 I live in Czechia and shipping costs here 2$
Beautiful, that's about the cost of a chocolate bar over here.
To be honest, I don't understand how they can keep this going. I am at the point where I am building up more gift cards then I can reasonably spend. I am seriously thinking about making a business as I am having more BL printers and BL filament than I can reasonable use for personal use.
Yeah man. Honestly I think it would be more than wise to grind as hard as we can for points because I feel like this entire system will be taken down or at least made a lot harder
LOL, that's awesome for you! Is your name the same on MW as here? I'll check out your stuff.
@@NeedItMakeIt yea, without the last underscore. The models I have uploaded is quite simple. Mainly hueforge art, and some halloween themed models. I haven't really had time to model in the past few months so my point history is declining. But due to the amount of models I have uploaded in the past I still gain a nice amount of points monthly.
@@madness3D_ Looks like some quality stuff, I haven't tried hue forge yet, but I like the possibilities that it opens up.
To be honest they're the first company that "seriously" tries to create an eco system that every "average" user that is interested in 3d printing can use. Like the first inkjet printers for home usage back in time. IF they manage to do that their business will be valuable that it was worth all the investment. Just with printing hardware this wouldn't be possible. These one click prints from the app and that people spend time to optimize designs and profiles are a major key for it to be possible.
Without such rewards i would design way less and not go sometimes through multiple iterations before i publish something. Unlike printables or other platforms they make sure that the time and material of the designers is compensated at least a good bit.
At least for me a Bambu is the first printer i would recommend a random friend that isn't into machines at all, without having to fear that he'll call me every weekend to fix issues.
All anti vibration feet come in doubles
Yeah, I went back to look and I didn't see that it was a double pack, do you think that's because they wear out, or some other reason?
@@NeedItMakeIt it's because they are junk, I couldn't get them to stay on, they slipped off if I opened the door too quickly, did any maintenance, or sometimes when removing the build plates. Some people say they are good now, but mine just went in the bin, and I got myself a 16x16 paver which seemed to work just as good
@@yeabutwecouldbefreer I initially had that experience, but they're supposed to be pushed in hard, they're a very tight fit. At first I wasn't sure, but having designed my own feet, I had a bit of an idea of what would make a good fit and pushed harder and they are in there and they are not coming out. Any chance you can dumpster dive? :) So far they seem to work well, but I have to put them through their paces to be sure. I have some previous videos testing my own anti-vibration Bambu skewer legs, and the quality didn't improve, nor did it suffer. It did however reduce the amount of vibration on the workbench that I was able to feel, I suppose that's a plus at least.
looks like a better looking larry from gta 5
I wish Makerworld would allow downloads without making an account like Printables and Thingverse.
It probably plays into that whole BOT issue, they'd probably want to make sure that everyone is a real person, or at least an advanced sentient AI that enjoys 3d printing. I had an account already thanks to having the X1C, but that's a good point, there are people who won't want to use it just for that reason.
And that is part of why they give (ridiculous amounts - or at least that's how it seems) of stuff for free. Users and user data. *Loads of* both.
I just wonder where *funding* for all free stuff comes from? If Prusa is cutting rewards, maybe to keep them sustainable, what's the deal with Bambu Lab? Profit from printers (with A1 I don't think so)?
Another part of course is death match for world domination 😬 - at least in 3D-printable models. Why bother with any other site when Bambu Lab pays you? But does payment model generate _original designs_ or bloom of _remixes from other sites and inside MakerWorld_ (free stuff, zero effort)?
Was there talks about Bambu Lab importing models from other sites and generating accounts - without asking the creators? And copying Printables design?
@@kimmotoivanen It's hard to know what's going on behind the scenes, is it just one company wanting to be the best, or maybe more.
It won't be long before AI will be able to generate 3D models itself and then anything which is not a technical model requiring accuracy will be automated. Meshy is a good example, it has come a long way, but it's still not quite good enough. As Image generation gets better and many angles of an object can be formed, 3d models can become better as well.
It's hard to say exactly where all of this will lead, only time will tell. For me, I can only trust that a company's main goal is to be profitable without that, there is no company afterall.
Ask Trudue to axe the Tax 😂
They sent me 2 sets of feet when i ordered them 2
Makerworld requires an account to download models, and also spits out files that can only be opened by Bambu Studio. If only for that, I'm sticking with Printables. Plus, being based in Europe, I don't have to complain about delays or shipping costs.
Accounts make sense because they had to deal with bot downloading and other frauds. But you can download files that can be opened with other slicers - a few designers might just not upload them. Usually it asks during the upload process to also upload "generic" files which then work in any slicer. Bambu actually also has warehouses in Europe that they ship from.
The 3MF files I have seen were set up for their printers. I don’t know if you can upload a 3MF for another type of printer.
You can upload other file types, though. STLs etc. This is what I uploaded there.
@@boggisthecat 3mf files from Fusion or 3mf files that are exportet as "generic" from Bambu Studio work for all printers and slicer.
Sorry you got pirated man. Hate it when that happens. Good video, though.
Law of headlines, sends its regards.
Seriously, cannot into normal titles?
Do you mind elaborating. I can't really gather what you're trying say here. Should I work on my video titles and if so, make a suggestion of what you'd do instead.
@@NeedItMakeIt Law of headlines - if it ends in a question - the answer is generally - NO.
Besides, why is that question mark there in the first place?
Single word in caps, whats the deal with that?
@@VEC7ORlt Thanks for explaining that.
To respond: Why is anything the way anything is? They're simply just decisions; whether good or bad, I don't know. FREE is just a way to emphasize the word, since people like free things.
In the case of my video, the answer was YES it was FREE, I suppose the Law of Headlines is more like a THEORY. This slogan sounds a bit like the 80/20 rule. I don't follow any of this, these are not rules to live by.
Anyway, I am still working on my next video, I'll have to think of which words I'd like to CAPTIALIZE this time.
Have a good one!
@@NeedItMakeIt don't forget to add words like TRUTH, SECRETS, EXPLAINED, HACKS, TRICKS, adds to the credibility.
@@VEC7ORlt Touch some grass, dude.
I’m in Oshawa
I grew up in Oshawa!
@@NeedItMakeIt Good on you for escaping! 😁
@@NeedItMakeIt let me know when that new aluminum slab is available and I’ll buy one Mike. 👍👍
@@mikestewart4752 Ha, I've escaped from many a Ontario town and city. I liked the Shwa, good friends, but that was years ago and not quite as built-up as it is now. No matter where you go these days houses and giant buildings are popping up... but they seem to have forgotten about making sure the roads can accommodate the extra volume. Must be planning for people flying in drone type vehicles or self driving cars.
@@NeedItMakeIt dude, I worked on the 407 expansion through Durham. All adding a highway did was make traffic worse!!! Anyways brother, nice to see an Oshawa boy doing well 👍
With the amount personal information that the printers upload to Bambulab, they should provide their customers at the very least one free spool every 6 months.
And that's why you need to use Express VPN, Express VPN protects you against.... just joking, although It's probably a good idea to have something to protect our identities better. Companies find ways of using this info in order to take advantage of us.
First
woow you are so amazing!
5th!
reporting is sucks, sorry.
Can you give an example of something you had problems with? I was just having a look at Printables, and it looks like they're trying to refresh their site a bit, hopefully they can make it a bit more competitive. I have 4K points there, and maybe I can save up for a printer instead of using it for filament?
Don’t care. Don’t want to support their closed ecosystem.
Hey that's cool too. I think that's a big one for a lot of people. The entire reason these manuf. have fast printers is because of the option source nature, Klipper Voron etc. Without those, we'd still be printing with an SD card at 50mm.
Unfortunately it‘s still a copycat of printables. I don‘t think that this is ok and nice at all. I‘m shocked.
Printables took the concept from Thingiverse, and monetized it did they not? Now that Printables only have one free spool per order, it's not worth the effort, they need to do more to compete. Competition is good for the consumer, so I hope Printables can do more to stay in the game.
@@NeedItMakeIt what? Thingiverse did not offer to get free filament or a free printer as a reward. Of course they should compete more. But makerworld did not only copy that festure from printables. It‘s a complete straight copy. I mean in my opinion. Bambu is not a good company with pantenting more and more open source. But nobody cares and all are happy and not caring about data issues any more. Of course there are the smartphones, home assistants who always listens ans so it is ok to send all data to china. Yeah. Just consume without thinking. What a brave new world.
Everyone copies everyone within the 3DPing game, competition breeds innovation and im sure that the existence of Makerworld has placed at least some semblance of pressure on Prusa and Printables, as the existence of Bambu Labs as a whole likely has, and im sure that has lead to at least some changes already and potentially further changes in the future
In short, if copying is that offensive to you. 3DP is not the game to be in.
@@ThatsNotMyArm YES! Every company should have competition. It'd be like having a sport, but there is only one player. "I am the best"... yes you are the only person, so by default you must be the best. If Prusa wants to stay in the game, they'll make some adjustments and come back stronger. I'd like to see that happen. For now, Maker World is doing a better job and people will jump over. I'm making about 25 -50 points a day, which means for me that I don't need to buy the filament for all of these videos. It's not Prusa quality, but it's pretty close.
@@ThatsNotMyArm then you didn‘t understand me. I‘m not against copying open source. That is what everyone did so far. But copying open source and making it closed source through patents like bambu is doing it and will do in the future is not ok.