Fantastic tutorial! I found it via the short you created. As someone who has been sketching for some time and now adventuring into 3d printing, this excites me at the possibilities!!
I selected your tutorial and it really helped. I printed my first HueForge print, which I downloaded from Printables, 4 filaments on the Bambu Lab P1P + AMS, and it worked out just fine. Now for the real thing, a print that I start from a photograph. Here goes nothing.
@Figure Feedback Hey Jeremy, first of all I am loving the non-stop content about the AD5M. Second I was also trying to use MakerWorld to print a art piece on my AD5M, I used Orca-FlashForge to add pauses at the stated layer heights, but my printer won’t pause automatically. I sliced again after adding the pauses, so I don’t know what the issue is. I have tried slicing again, and resending the file though Wi-Fi and USB. If you have any ideas, I would really appreciate them. Thanks as always.
what are your temperatures at Im having trouble with it not printing in everyplace it will skip areas. Especially when it is laying down the black which is currently where I am stuck at. Any help would be appreciated I followed your other instructions in trying a brim to hold it in place. I don't want to have to do an entire an entire raft it's just like it prints and then it's like a giant hole is punched in an area where it doesn't print and I'm not sure what's causing it
Hey I have been having issues with my prints sticking. Any recommendations on what I can try? I turned the bed temps up but that didnt really help and even made the bottom layer too hot and on a benchy the bottom layer seemed to sag from the temp. Any suggestions or glue types you think could help?
Try cleaning your build sheet with soap and water. You also may need to lower your z-offset a bit so the nozzle is closer to the bed. I've used Elmer's school glue on my old Ender 3 in the past and it worked fine.
Hey I've encountered a problem with my adventurer 5m messing up at bridges to the point that the nozzle hits the print and pops th print off of the build print any tips? (Leveling doesn't do anything)
@@FigureFeedback I just tried it, thank you so much you saved my business i was honestly gonna return the printer but the brim stops prints from popping off the build plate thanks again!
Nice video. I Wish my printer would accept PAUSE commands. unfortunately ANYCUBIC makes some really crap firmware changes to their printers, took me a while but I found a way to get it to pause, UNFORTUNATELY it requires you to manually hit the pause button within X seconds or it just starts up again; and the longer you make that pause delay to allow you time to get to the printer, you have to then wait that same amount of time before the hacked pause releases the printer so you can do the filament swap. I usually have a camera in my print shed, so I have the printer beep a little annoying tune to alert me, but I have to be available...so for My Kobra max instead of a simple pause command, I have this monstrosity: ;CUSTOM_GCODE M104 S192 ; standby temperature M300 S440 P1000 ; Beep M300 S440 P1000 ; Beep M300 S499 P1000 ; Beep M300 S400 P1000 ; Beep M300 S440 P9999 ; Beep M0 S66 ; Wait for Pause in this case 66 seconds M109 S192 ; WAIT for resume temperature
I got the Flashforge Adventure 5 because of you. I love it and am using it to make gifts for my wedding
Fantastic tutorial! I found it via the short you created. As someone who has been sketching for some time and now adventuring into 3d printing, this excites me at the possibilities!!
Another great vid thanks! Excited to try this out!
That is really cool. I could see doing a multi print collage using this method.
Jeremy coming in clutch with these tutorials
This is really cool. I've never seen this done before.
I selected your tutorial and it really helped. I printed my first HueForge print, which I downloaded from Printables, 4 filaments on the Bambu Lab P1P + AMS, and it worked out just fine. Now for the real thing, a print that I start from a photograph. Here goes nothing.
Wooaaah this is cool! This is a the first time I’ve seen this and I’m excited to try it out! Very polished and professional video, great work!
Thank you so much!!
I was also looking how to do multi-color printing in flash print. Thanks
You put out some great quality content man! Thanks for these videos! Keep em coming
You only need to add the filament change script in Cura once. You can separate the layer numbers with commas.
Nice! I didn't know that. Thanks for sharing.
amazing result
@Figure Feedback
Hey Jeremy, first of all I am loving the non-stop content about the AD5M. Second I was also trying to use MakerWorld to print a art piece on my AD5M, I used Orca-FlashForge to add pauses at the stated layer heights, but my printer won’t pause automatically. I sliced again after adding the pauses, so I don’t know what the issue is. I have tried slicing again, and resending the file though Wi-Fi and USB.
If you have any ideas, I would really appreciate them.
Thanks as always.
Amazing, But Which stand have you printed to this Art work ?
what is the transmission distance? Do I need to edit that for each filament?
I am a really important question can I do it on my prusa mk4?
If I have AMS, how do I tell the AMS to automatically change colors? Do you know by any chance?
Wow!
Love it! Also meant to tell you last time but forgot, your screen cover is on upside down 😅
Ha! I never would have realized that. Thanks!
Thank you! Great video! Have you tried making your own images into prints?
Not yet, but I'm planning to.
what are your temperatures at Im having trouble with it not printing in everyplace it will skip areas. Especially when it is laying down the black which is currently where I am stuck at. Any help would be appreciated I followed your other instructions in trying a brim to hold it in place. I don't want to have to do an entire an entire raft it's just like it prints and then it's like a giant hole is punched in an area where it doesn't print and I'm not sure what's causing it
I use 80 degrees Celsius on the bed as a rule for prints that take up a lot of bed space. You could try that, raising the bed temp improves adhesion.
There is another art technique where you print it all in white then shine a light behind it. I can't remember what it's called though.
That is called a lithophane. They are cool too!
Hey I have been having issues with my prints sticking. Any recommendations on what I can try? I turned the bed temps up but that didnt really help and even made the bottom layer too hot and on a benchy the bottom layer seemed to sag from the temp. Any suggestions or glue types you think could help?
Try cleaning your build sheet with soap and water. You also may need to lower your z-offset a bit so the nozzle is closer to the bed. I've used Elmer's school glue on my old Ender 3 in the past and it worked fine.
Hey I've encountered a problem with my adventurer 5m messing up at bridges to the point that the nozzle hits the print and pops th print off of the build print any tips? (Leveling doesn't do anything)
Have you tried applying a brim to your model?
@@FigureFeedback I just tried it, thank you so much you saved my business i was honestly gonna return the printer but the brim stops prints from popping off the build plate
thanks again!
Nice video. I Wish my printer would accept PAUSE commands. unfortunately ANYCUBIC makes some really crap firmware changes to their printers, took me a while but I found a way to get it to pause, UNFORTUNATELY it requires you to manually hit the pause button within X seconds or it just starts up again; and the longer you make that pause delay to allow you time to get to the printer, you have to then wait that same amount of time before the hacked pause releases the printer so you can do the filament swap. I usually have a camera in my print shed, so I have the printer beep a little annoying tune to alert me, but I have to be available...so for My Kobra max instead of a simple pause command, I have this monstrosity:
;CUSTOM_GCODE
M104 S192 ; standby temperature
M300 S440 P1000 ; Beep
M300 S440 P1000 ; Beep
M300 S499 P1000 ; Beep
M300 S400 P1000 ; Beep
M300 S440 P9999 ; Beep
M0 S66 ; Wait for Pause in this case 66 seconds
M109 S192 ; WAIT for resume temperature