Love your work, I just did the same and tapped using M4 with red loctite, had debated on using a dab of JB weld on the heads like some others on TH-cam but decided to rely on the loctite
Thanks very much Ash. I haven't heard of using JB like that but I wouldn't trust it that way. I was going to drill different screws and add aviation wire to each but there's not much clearance under the valve cover. Maybe if some slim titanium fasteners were available, pre drilled for aviation wire, would be a good option???
@@stewartrhaines if you’re doing this on an evo just be aware if you drill too deep you can run through into the holes that hold the coil cover onto the valve cover. Upper and lower holes line up on some of them
Love your work, I just did the same and tapped using M4 with red loctite, had debated on using a dab of JB weld on the heads like some others on TH-cam but decided to rely on the loctite
Thanks very much Ash. I haven't heard of using JB like that but I wouldn't trust it that way. I was going to drill different screws and add aviation wire to each but there's not much clearance under the valve cover. Maybe if some slim titanium fasteners were available, pre drilled for aviation wire, would be a good option???
I like how that fitting itself is baffled
Yes its very good hey. I wonder if i really needed to re-install the factory baffles???? What do you think?
Na I think you did the right thing. The oil may act differently and cause issues.@@UzumakiGarage
Looks great.
Thanks man. It was a successful upgrade but it did take some work hours.
Nice work! What size bolts did you use?
Thanks man. I used M5 screws.
@@UzumakiGarage Thanks!
@@stewartrhaines if you’re doing this on an evo just be aware if you drill too deep you can run through into the holes that hold the coil cover onto the valve cover. Upper and lower holes line up on some of them
@UzumakiGarage Thanks for the info 👍! I'm going to be wiring my haltech wb1 this weekend the way you did. Thanks for the video on that, too!
@@stewartrhaines you’re welcome. Let me know how it goes. Good Luck!
How much?!?
I can do yours for a fair price. A lot of labour is required