How to install the throttle cable on your

[@thedashingpeanut]

Thanks man I realized after watching the video that I installed that grey piece upside down you saved me like 2 hours of tinkering tysm

[@soggyridesmotorizedbicycle6258]

Not bad bro. I know how hard it is to work on something and hold it in focus at the same time. I could see what you were doing clearly. 👍

[@icft6183]

Thanks man , it was not an easy task 🤣

[@epoxy1710]

I tried to do this for 5 hours on my DT50MX before I found this video and fixed it after 3 minutes😂

[@user-bp1md5cs1h]

Sir, I have to say thank you so much for an excellent video you showed step-by-step how to put together the entire throttle cable. I’ve been looking for a video all day and yours explained it fantastic and you took your time. Thank you thank you thank you you should be the only one on TH-cam, making videos for go kart and dirtbike engines

[@AMMO_x]

Super video! Now I learned how to replace the throttle cable on a 2 stroke! Thanks bro!

[@icft6183]

Yes sir. Y'all stay tuned. I'm going to start doing it again here in the next couple of months

[@jamesdeer1910]

Thank you very much on the segment about installing a throttle cable. That's a 5 star plus bonus !

[@hitzGhTV]

Thanks very much... I didn't know there was a small point inside the carburator to match where the cable lock

[@jbl_lfm_by_Adrian_perales]

Good video been trying to find a video to show me how to replace throttle cable on cam am ds 70 and this helped. Thanks

[@dominikz.1376]

Great video: looks like you got it! Expert!! Great video man

[@jamessmith2157]

Thank you Sir, certainly helped me finish my project

[@samsungisgood-___-4107]

Thanks for this video, man. I didn't know what I was doing, but this really helped me.

[@walterwilliams5491]

Thank you! I actually needed to learn that

[@niebith]

awesome video i liked and subscribed

[@robfraser33]

Helped out a bunch. Thank you

[@chinesecomics1596]

Thanks bro, this video just saved me a long day

[@GDTractor]

Very helpful .. EXACTLY what I needed ..... GD Tractor

[@mikeanthony8934]

Hey, I put on a new throttle cable and bike wont start. I remember there being a clear plastic piece covering the cable on the carburetor end. Do u think that's the problem?

[@can_of_easystart]

Life saver man

[@romeparrilla8307]

Thanks for this learning videos about carb.i would really appreciate if you can help and explain my problem,i just bought a 1981 h.ex.nc50 with a rusted and plugged up carb,so i bought a chinese made one fr ebay and when i installed it,the gas lever throtle is totaly loose and the jet needle wont go up or down,theres just no function,so i wonder how am i gonna make it work?im just a begginner lol' thank you....

[@icft6183]

@@romeparrilla8307 lol it sounds like you have a lot of problems. All I can say is go watch TH-cam videos on each thing that needs to be fixed

[@ExecutionStyleInc]

where do I get that little boot for the top part?

[@Aalphashark]

Thank you.

[@dominikz.1376]

I tried this two years ago on a JAWA 50cc and it was a diarrhea mess. I assembled and disassembled it like four times and it simply WAS Not right. The throttle cable was like real loose and didn’t snap back after a twist. It was just an assAnine diahretic mess for me. MMmmmmmmmmmm, mmmmmmmmmm

[@PennyPogue]

Same thing happened to me how do you fix it

[@PennyPogue]

I had to rotate the part under the spring it wasn't aligned with the pin as showed in the beginning of the video I thought it was but I was aligning it with the wrong part

[@4th]

Did ya fix it ?

[@Edward_Airborne]

Having the same issue with my Jawa

[@Wh05LEE]

This didnt help sort mine as i have a 125 motorbike but i helped me just a bit

[@Randomness736]

Thanks!

[@abrahamgomez374]

Where can i find that 2nd washer you put in after the pin it what’s it called ?

[@lilcheese7881]

I heard somone say a pac-man clip?

[@MalkitSingh-tu9pn]

Thanks g

[@David-k5d4x]

I am also wondering what that disk thing is called if anyone knows please reply to my comment

[@icft6183]

I'm not exactly sure what it's called. I'll try to find out for you

[@michelmullaney3641]

So listen I need a little help bro… I got a pwk 21mm and I need it to fit the 13mm 80cc port with a boot..anyone know what I can get to make this happen or work?

[@icft6183]

There's a little piece that goes on top of the carb that I didn't show in the video

[@adanballi4321]

Thanks

[@reubenwallace5855]

Does anyone know the disc thing is called he put on after the pin

[@albertmurturi]

Thnxxxxxzzzzzzz❤❤❤❤❤❤❤❤❤❤❤

[@olivervanderbloomen7854]

I assembled like in the video but my dirt bike just low idles and doesn't have any power and then will just shut off. Any idea why this might be?

[@exospizy7858]

Adjust your tic over screw

[@DanielStevens-zo2bj]

Does anyone know how long the needle is 49 in mm length

[@mookie_gaming8501]

Where can I buy a throttle kit for my 50 I have been looking and almost every one I buy does not have that spring and needle at the end where can I buy?

[@icft6183]

Amazon

[@icft6183]

I'll try to find a link to it for you

[@mookie_gaming8501]

@@icft6183 thank you

[@zebzweers9466]

I Just need to get the end that rond thing off but help

[@darrenodonoghue]

What happens if you don’t slide it into the little groove

[@adventureswiththeaveragejo315]

awesome video i liked and subscribed