Godox X1T Control Guide with Custom Functions (Flashpoint R2 Flash Transmitter) (Pixapro ST III)
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2017
- My entire kit of gear : kit.co/robhallphoto
Where I get Music and Effects: share.epidemicsound.com/tw3LG
Follow me on Instagram: bit.ly/2sj7Lsq
X1T Trigger : bit.ly/GodoxX1T
If this looks familiar thats because it was a portion of the Godox and Fuji video. I wanted a dedicated upload for people looking for this instruction!
The Flashpoint x1-N is the ultimate radio transmitter for Nikon DSLRs that speaks to Flashpoint AD360ii, GodoxLi-on and Godox and Nikon Radio Remote without missing a beat and connects to all strobes with sync ports. The incredible range of these compact and lightweight units as well as their integrated functions and features make them the first choice of professional photographers. The proprietary TTL and HSS enabled 2.4GHz x1 Radio Remote System radio triggers transmits atop a Nikon body with the essential TTL pass-through and laser AF assist and works with the complete family of Flashpoint Speedlights, Monolights and Strobe lights with x1 TTL radio transceiver built right in.
All the x1 enabled family communicate seamlessly: the lithium powered Godox Li-on Nikon, Canon and Sony TTL speedlights, the Godox M alkaline energized speedlight, the fantastic AD360ii 360 Nikon and Canon TTL powerhouse, and the masterful 600ws AD600 monolights. Older Flashpoint flashes can be fired and controlled off camera while being attached to the x1 Radio Remote Receiver FPRRx1RN to grace remote link to earlier models.
The x1-N provides a full proprietary GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off and most importantly, TTL and Manual Groups can be conveniently mixed together as needed.The battery powered units provide TTL, HSS (High Speed Sync) and even a HSS pre-sync timing adjustment for precision synchronization. PC cord sync input andoutput ports are provided for external device remote sync without automation. x1-N receivers are compatible with Nikon CLS system speedlights like the Nikon SB-910, SB-900, or SB700. Controlling the remote strobes is straightforward, with a large clear LCD panel interface aside 3 separate buttons relating to channel, groups and modes, while a thumb wheel provides fast scroll adjustment for the selected function. A simple switch located on the side of the transmitter allows the laser pattern Focus Assist Light to be switched on and off when needed.
x1T CUSTOM FUNCTIONS
The x1 Experience/Advantage
The x1 TTL Wireless Flash System is the advanced 2.4GHz radio remote that adds camera TTL dedicated custom functions to your multi flash experience. Easy to use buttons command a full range of functions like reliable channel triggering, group mode selectivity, HSS, all with powerful signal strength and exceptional stability to your selected camera flash language. LED panels clearly display the status of all remotely linked x1 compliant strobes so you always have control of group lighting mastery. x1 wireless communication gives speed of light response to on camera or off camera x1Family devices for a spectacular advantage on the shoot in any environment.
The proprietary TTL and HSS enabled 2.4GHz x1 Radio Remote System transmits atop a modern DSLR body with reliable TTL and pass-through to speedlights, plus laser AF assist.x1 transmitters work with the complete family of Flashpoint Godox Speedlights, AD600 Monolights and AD360ii Strobes with x1 TTL radio transceivers built right in. Add a x1 receiver to any legacy flash with a sync port and it too becomes part of the x1 Family! The incredible range of these compact and lightweight units as well as their integrated functions and features make them the first choice of professional photographers.
All the x1 Family enabled gear communicates seamlessly: the Lithium powered Godox Li-on Canon, Nikon and Sony TTL speedlights, the Godox AA alkaline powered speedlight, the fantastic AD360ii 360 Canon and Nikon TTL powerhouses, and the portable 600ws AD600 series monolights. Other strobes can be fired and controlled off camera while being attached to the x1 Radio Remote Receiver to remote link to earlier models.
All the x1 enabled units communicate seamlessly: the lithium powered Godox Li-on and AA powered Godox speedlights, the AD360ii 360 barebulb strobes, and the portable 600ws AD600 monolights - now all available in Nikon, Canon and Sony TTL as well as Manual models, with more proprietary camera versions on the way. Other strobes can be fired simultaneously by being attached to the x1 Radio Remote Receiver, and older R1 AD360ii and Godox Li-on units can be controlled and triggered using the bridge Receivers for Non-x1 AD360iis/Godox Li-ons.
One Remote to Rule Them All.
One Radio Remote System to Unify the Flash.
One Remote to Streak, Godox V860ii and AD600.
x1 Flash Imaging Freedom
Radio Active. TTL Auto. HSS Master..
Can you control the X1T-C in camera like with the yongnuo transmitters?
I'm unsure, i'm pinning your comment in the hopes that a Canon user that can answer it for you.
thanks
Yes you can, just go into the camera flash menu and make the settings.
@@robhallphoto hi how could we set an id in XIT transmeter from canon 600ex-rt speedlight .
@@robhallphoto yes forsure
Hi Robert, there is one power-on mode that you didn't cover. If you hold the test button down while you turn the trigger on, the status LED blinks twice and will allow you to control and trigger units very close to the transmitter. It puts it in a low-power mode that may reduce the maximum range of transmission, but removes the minimum range limitation.
THANK YOU SOOOO!!!! MUCH
I cannot thank you enough for covering modeling light turn on/off that I have been wondering to figure out for so long.
5 years later - still a very helpful video, thank you! 📸
Thank you for making this video I've been waiting for somebody to do this for a long time
VERY helpful - THANKS! I was completely confused (and pretty frustrated) until watching your video. Successfully got a TT685 and a TT600 to finally work as desired. Yay! The little manual with the trigger was not so clear (being nice about that).
I am not real clear about getting HSS to work properly with those two triggered flashes, but this is a great start.
Thank you so much for this video. I spent hours trung to understand why the unit would not allow change of mode, would you believe. Your 'factory defaults' instruction restored both normality and sanity.
Thanls for the tutorial. My Flashpoint r2 receiver goes idle every time I leave it for awhile without shooting and it wouldnt flash flashlight so I have to run to it amd turn off and on all night. How do I stop this from idling?
Awesome video. How do you set the "auto mode" so that the tt600 flash adjusts the zoom automatically
this is a very helpful guide Robert, thanks for spending time to make this video tutorial. Keep it up bro
This video is LIFE I needed this. Thanks for making it happen!
This is the best review of the X1T I have watched.......... now I understand how to use it!! Brilliant! :)
man you're a life saver... i had a strange behavior, when i turned on the x1t, my godox ad200 turned on the pilot-leds.
after reseting the x1t, everything went back to normal
Amazing!! Thanks for this detailed instructions!!
This is a Godsend - THANK YOU! I am amazed and that Godox does not include any sort of printed instructions for something so non-intuitive and complex. How on Earth did you figure all this out??? Thank you so much!
www.godox.com/EN/Download.html
Thank you. That link does not seem to work on Chrome, Firefox , or Safari. So, I will try again later.
I mean, instructions DO come in the box when you purchase one as well..
@@andrewpolitano not mine. i got a used one!
Thank you. Exactly the type of explanation I was looking for about the Godox X1TC
Thank you! This is exactly what I was looking for!
Thank god for Robert Hall 🙏🏾LoL. I was having the hardest time with this trigger.
Great video!!! This helped out so much!
Many thanks for the tour, congratulations on the clarity of the guide ... I would like to ask a question, and recently that I own X1 transmitter trigger for Nikon with its receiver! It works well I'm happy but I don't understand why if I attach a flash on the transmitter shoe X1, the flash attached to the transmitter does not work, the transmitter X1 triggers the flash attached to the receiver, but does not trigger the flash attached to the transmitter that is attached at Nikon, I don't understand where I'm wrong and ask for help to use the second flash attached to the X1 ... Thanks and sorry my bad English
Hey great review. I have been trying to figure out if it's possible to trigger the shutter with the x1T-O (I have a Panasonic with the x pro on top in the shoe) I saw a vid where they said it was possible using the x1t as a remote wireless trigger for the shutter. any thoughts on that?
Very helpful tutorial. I was searching for the second curtain sync function 👍👍👍
Thank you so much! I have a few Contax and Yashica film cameras and lenses and been wanting to use flash for my film shots. The Fn 01 single pin mode was the answer, will be doing manual metering and this is such a great thing to know, I won't have to tether with a Sync Cord!
Thanks a bunch for this video. Really simple, and still helping people!
Excellent information. Exactly what I was searching for.
My X1 sleeps and I have to press GR button to wake it up. Appreciate if you let me know how to keep it on all the time. Its really a pain to see it sleeping and the flashes don't fire.
Hi Robert ! thanks for the tips, very useful. I'm just crazy about to put off the "standby mode". Is it possible ? It's turning off (or standby) if I don't touch it for few moment, very unconfortable.
Hello Rob,
Thank you for the instructional video. I have the channel, etc. all set, but for some reason, when I adjust the power from my strobe, it will not sync/communicate that adjustment with my Godox X1. It used to, but now no. I can only adjust from the Godox X1 and it communicates with my strobe. Can you help with this?
I have a hard time running the X1Tn and the YN622n together, although I did the custom function of a single pin mode, but every time I have to put the yn below, the x1t above it, then turn yn on first then turn camera on then turn the x1t on so all the flashes would work simultaneously for one shot only, then redo this whole process again, it's a pain in the butt, hope there's a way to make them work better than that
How do you use function 3 with the Godox Sk300 II? More specifically I want to use a sync cable to try to avoid any misfires during a graduation ceremony. I've heard wifi signals can be an issue sometimes and I can't take that chance. I know I need to set function 3 to OU/out but when I do the wireless function on the transmitter and Sk300 still seems to be active. How do I know that it is operating via the sync cable?
100% pure knowledge, No bullshit. Thank You.
Thanks I was trying to get the HSS symbol to appear on X1c transmitter.
Can I use my Godox X1T (mounted on my Nikon body) to trigger shanny SN910EX-RF (wirelessly), since both can operate at 2.4 GHz frequency.
That is the content i wanted to watch. And to reach there i have watched like 20 more delusional videos. Thanks Budd
Hi... Thanks for the video... I am using Nikon d3400. I switched on af assist switch as well as turned the mode "on" in custom function settings. In camera, I selected af single servo and single point focus. But af assistance in x1t is not working? Any idea? Thanks in advance
I loved the video ! Very useful!
A bit late to get an ad200 but this is by far the most helpful video...thanks a lot Robert.
Oh the little things! Didn't know about the "long press Gr button to modify all active groups at once" feature. Thanks man!
Ive watched this 5 times and missed that feature, thanks for the tip!
Godox x1 c can be used with Shanny 600c?
Can we change power of flash through transmitter?
Can we use shanny 600c ttl with Godox x1 transmitter & receiver?
Instead of this trigger can i have a godox tt685s as a trigger? Will it work as efficient as this trigger. Thank you in advance...
Hi, I was wondering if the X1T would work with Elinchrom flashes? I just received some flashes and I'm looking for a good trigger. Just not sure they would work together.
Thanks you for the great explanation in the video.
Godox X1-T only triggers Godox (and Godox rebrands) natively. Not anything else. You could connect an X1R receiver to the elinchroms sync port but you will not get remote control
Can I use this transmitter for godox version flashes (r2 zoom mini) since its basically the same besides branding? I'm having trouble connecting thinking they would be compatible.
Hello i have A6000 and a Godox flash that has a hotshoe that is specific for this camera and some more Sony... I want to use one more speedflash cheap one that will be not working on the camera, but can this transmitter fire other flashesh for other cameras ?
Good synopsis. What brand of X1 were you using?
The Canon version is a bit different on the custom functions.
C.Fn 04 is rear curtain sync, C.Fn 06 is three or five groups, and C.Fn 07 is flash beep on/off.
You can also hold down 'mode' for 2 secs, to go into group mode, which allows you to mix TTL and manual groups.
And hold down the test button while powering it on, will enable the trigger to fire the flash at close proximity.
+Andrew Parnell this was on a Fuji, although I'm fairly certain it's identical to Nikon.
Thanks Andrew.
I've been looking everywhere for the TTL plus manual groups info.
You sir are a legend!
Andrew Parnell 408+
Khñjvkbfñ
Can you also adjust compensation in TTL mode?
For "multi", how do I make it trigger multi flashes out of my AD200 for 1 trigger? I can change the number of flashes and the hz, but it doesn't flash more than once.
Guys, is there a flickering screen when battery is low on the Godox X1Ts?
Thanks for the video. I bought one of these and have spent some time reading the directions, which are not completely clear. A few questions that the manual does not explain: pressing and holding hte mode button for two seconds brings up a GR symbol. What is that for?
setting groups
That is what I needed thanks man for the video. Couldn’t use a flash with multi function and now I can awesome but still don’t know how T and H works when I set t-1 and h-10 I suppose to have 10 flashes in 1 second but I have not , only t set to 5 make 5 flashes and set to 10 gives 10 flashes?
maybe flash doesnt recycle its power fast enough to achieve the settings?
Hello Robert, I'm looking to control off camera flashes, AD600 & TT600's while triggering an QFlash on camera bracket through PC synch, however I changed the custom function 3 to "PC Out" and it still wouldn't fire the QFlash with the off camera flashes, Any ideas?
Hello. Thank you for the video. A quick question, what is the purpose of the extra hot shoe, on top of the devise ? Is it active all the time, regardless of the mode and settings you use?
Thank you.
+Stefanos Tsakiris when you put a flash on top you get an extra group to work with. If you aren't fully adopted in the Godox system you can put another speedlite on top of your camera. That's pretty much it!
Thank you.
I'm using a gh5 with the x1t-o and/or the tt685-o. But I have 2 nikon compatible speedlights -- sb28, Metz -- and a Cactus first gen manual. I've given up on the idea of doing cross brand ttl from the 'o' devices but I hold out hope I might be able to do output controlled manual to either the sb or metz or cactus speedlights. So the question is: is there a receiver, presumably Godox, that will let me manage power level on these legacy flashes from my Godox devices. I'm happy to follow links or search down through comments if this is an old question. Your work on the Godox line in among the best, most articulate and professional I've found. Thanks for that.
Can I use the X1T to trigger a Nikon SB600 Speedlite using a suitable Godox (or other) receiver?
Yes, but you need godox X1R receiver..
I have this transmitter and a evolve 200 and want to shoot HDR with flash. Will this allow me to set variable exposure settings in my Canon 5D IV. Help would be appreciated..thank you
Is there any way to keep the display lit up or set the time until it turns off? It seems to time out quickly on mine.
Me too, its such a pain when flashes dont fire
Thank you. Very clear video from one point to another.
What is fn10 and fn11 on the version 3 update?
Great video, by the way!! It helps a lot.
FN11 is for setting user ID FN10 is for use with an APP. I can't find any information on how to connect and use it with the app.
Can you put a Nikon flash on top of the remote and have TTL functionality for the Nikon flash?
Nope
Thanks for this. I’m using the X1T-O and for some reason there is a half second delay between pressing the shutter button and the photo being taken. Maybe it’s something in the custom settings.
Definitely update firmware. Some users experienced this on the Sony A7R2 as well.
Robert Hall Photography thanks Robert. I have a Mac so I can’t upgrade the Godox firmware. But I have just changed the flash on the camera to Fill Flash and the delay is all but gone. Just a fraction of a second delay now.
Is there an option to invert the wheel? Somehow I always scroll in the wrong direction through my flashes.
Thank you, that is some great guide how to use that trigger.
hello -please help i cant see group D & E on my x1t trigger where i can control multiple flash heads
I just received a news about the new Godox A1, it is a mini OCF for cellphones with 3 LED lights, which can be triggered by cellphone app, could you please do a review on this product?
Does it support my yongnuo YN568ex high speed sync if i add X1 receiver on top of it?
Im still finding a way to trigger the multimode in godox tt350s
Great tutorial, it's helped me with my DSLR Nikon's. I just purchased the Z 6 and can't get the auto focus illumination to work, I just shot an event in a very dark place and I could have used this option. any ideas or suggestions would be greatly appreciated. anybody else struggling with this? ( i own the flashpoint R2)
Did you solve it? Im looking workarrounds
you're the best!
Thank you so much Rob, so to enable HHS you do it at the strobe itself?
Nope. X1-T will automatically enter HSS when you have it enabled in camera, and go beyond your cameras max sync speed.
thanks for the video Robert. I have purchased FlashPoint strobe without its transmitter (it went missing during the courier) FlashPoint things are not available in Asia but Godox ones are available. My two questions (1) Will this work in place of FlashPoint R2 X1T-N iTTL, which is what I had to receive as a pair? (2) Do i need to be careful about good transmitter available in TTL and iTTL models? If the detail helps, strobe model is 'FLASHPOINT XPLOR 600 HSS TTL' Thank you so much in advance
Yeah, Godox X1T-N is the same thing as R2 X1T-N TTL. No there's only one type for ttl, you just need to make sure it's the correct brand (N for Nikon, C for Canon, etc.)
excellent tutorial
Mate, I needed this video. This transmitter got me confused AF.
Thanks. Very helpful video
Hi Robert
Thabk you for this video. Very helpful.
I have a d850 and three nikin Sb910. I am planning on purchasing the godox wistro Ad600, x1T and three godox X1R to work with all 3 of my Nikon sb910.
Some reviews suggest that the godox x1t and x1r do not allow you to change the power of the nikon flashes wirelessly...have you tried this trigger kit with Nikon body and flash? And did you experience any limitations for controlling flash power wirelessly?
Lastly you touched upon the flash zoom in this video. Can the trigger and receiver automatically adjust the flash zoom automatically based on the current zoom on the camera?
+Yasin Ch I haven’t touched a Nikon SB910 since Godox has had the X series, so I can’t personally vouch for it, but much like the Yongnuo 622 system, you should be able to simply put them in TTL and then the X1+x1R will allow for TTL and manual control.
As for the zoom, I have no idea how an SB910 would behave.
Robert Hall Photography I have just bought myself a godox ad600 after yoir very in-depth review and I can happily say so far I'm very pleased with the light. Thank you for your efforts it does go along way!
I also have purchased 3 x1r-n receivers with an xpro-n. I will keep you updated on my findings, hopefully it can help you for any future queries yoir viewers may have. Cheers once again!
One thing that's confused me about the Godox triggers since the Fuji update a couple of months ago - I can now use a Fuji controller for full remote-control over Nikon or Canon-system flashes, but will it also work with Canon and Nikon Godox receivers? Can I put an SB900 on an X1R-N and an X1T-F on my Fuji camera and have TTL, HSS, etc? Better yet, could I put a 600EX on an X1R-C and trigger it from a *Nikon* camera with an X1T-N attached? It's the universality of cross-compatibility that I can't seem to find an answer for anywhere.
I can't make a claim to all flashes, but I do know a lot of people have found the cross-brand compatibility to work with the receivers too. Not sure specifically for the models you mentioned but people are definitely doing this.
Hi,can i pair this transmiter with yongnuo flash YN600 RT?
I have godox sk400ii strobe light, it has power of increse or decrese at 1/10 stops, while my godox X1T-N control sk400ii by 1/3 stops.
Have any idea to stops light by 1/10 stops ?
Did godox X-pro works by 1/10 with my godox sk400ii ??
i have nikon d4 and d4s body i want to use it with godox ad200 and ttl 600 units now my R2 ttl transmitter has been miss firing do i need to upgrade my R2 and or replace for newer transmitter. which one to upgrade to?
thanks zip
My X1T displays E9 on the screen and won't do anything, its brand new, any ideas? Thanks
Robert, using this Godox system to fire a speedlight which in turn was to fire off a Bowens studio flash; image was almost black, looked like only capturing available light. Dropping shutter speed to 1/40 made no difference. In the end, I used the pop-up camera flash to fire the studio lights and all worked fine. Any suggestions as to why the Godox system didn't work?
I have never personally attempted optical transmission with Godox gear, but the first thing I’d look at is the S1/S2 option to change the behavior of how it works with preflash.
Hi Robert, Hello sir, i had query regarding the godox x1N reciever with a Nikon sb910. I have a Nikon z6 and the X1Tn transmitter. I cannot seem to activate the HSS at 250ss. And also is it possible to control the power in manual mode via the transmitter??
Also it doesn't shift automatically to TTL mode when I change it on the transmitter. Any help would be much appreciated.
Hi guys I'm still new in using triggers for Speedlights I want to know do I need a receiver for this kind of a trigger for a Sony A7 using a Godox TT685s Speedlight?
To trigger flash, do you need to transmitters? I am unable to get my flash communicating with one on the hot shoe of my camera. thanks!
is there a way to control if high speed sync is on or off, or is that only available from the flash?
Hi! Do you know what functions 9, 10 and 11 do?
Hi thanks for this. Can I use my canon 430ex iii without a receiver?
no.
I’m using trigger for canon it’s Flashpoint version when whenever I am putting 860iiC flash on top of trigger it’s turning on HS mode on Flash automatically it’s not letting me to turn off HS mode on Flash while it’s on trigger some time I do need Flash on camera with trigger while flash on trigger I can’t open Menu only thing I can do I can change speed change mode but I can’t turn off HS mode and not letting me open any menu can you tell me how to fix the problem ya my firmware is updated still facing same issue problem with HS is flash get heat up so quickly and I can’t use for long time and I don’t need HS all the time when flash is not on top of trigger I can turn on HS mode but when flash on trigger it’s turning on automatically I really need to your expert advice on this issue
Hi ! anyone has in idea why the laser af assistant does not work while the af light on the camera works in same exact mode ?
PLEASE HELP !
I jus got this and I haven figure out how to control the power of the speedlight on the transmitter. What setting does the speedlight and the transmitter needs to be? So they can be properly sync? Thanks
th-cam.com/video/j4UZZ0qyqb4/w-d-xo.htmlm43s
thanks a life saver huge respect man
Can i use high sync speed (HSS) feature with godox 685ii *sony using godox nikon x1 trigger ? , My AD200 was broken
now i have only godox 685ii *sony and sony/nikon x1 trigger. any possibility to use HSS mode, help me.
HI
Does this trigger work with canon speedlight 580 ex ii ...
I mean godox x1t c
shadi atallah I have same problem
Very informative. Thx!
if I had two x1s could one act as a receiver?
Does this work on latest canon eos cameras? such as 800D
Help me someone...
Can i mount diff brand radio trigger on the upper mount on godox trigger?
Will it work?
How about removing the sleep timer for x1t ? Is there any way to our trigger ?
I am having a problem with my trigger, I have 2 speedlites with 2 transmitters and a strobe, plus trigger on my camera, I’ve tried to control all speed lite & strobe settings from the trigger but hasn’t been successful so I’ve got to go to each light and dial in the settings I want, do you have a video on this?
I only have ABC group present despite have a speed light in D. Any idea how to get that to show on the trigger?
Custom FN 6. Hold ch/ok button and you will get in lot custom fn screens scroll to custom function 06 press GR scroll to 5 instead of 3. Press mode to save and exit.
Do you know if the x1 can trigger the godox fc16 flash trigger?
how to change the sleep time of this gear?
I have only 3 groups (ABC) in GODOX X1T (canon). Even after watching this video I have changed the custom function but still I can not see 5 groups. Any help?
Same here, anyone with a solution? Or do we have a faulty one?