Thank you! Your demonstration was very easy to understand. Just received an X1R N and a X2T N. I will use them on my D850 with my SB-900 and SB-800. You saved me a lot of time.
Your tutorial is the one that makes the most sense. I have a Nikon SB910 and bought both the receiver and transmitter, but had no clue how to use them....till now. Thanks
Hi Alex, very nice clean presentation. Since I'm purchasing the XpropN TTL transmitter, I am now shopping for the best receiver units for it. Your video popped up and I wasn't disappointed. Great job! I wish you all the best.
Very helpful! I recently got both the receiver and transmitter, but hadn't done much experimenting on actually using them. This saves a lot of poring over the manuals!
I have been looking for a video to remind me how to control my X1r-S power output while using my Godox Trigger. I've lost my manual and can't seem to find one. Yours was the only video that said to put my X1r-S connected flash in TTL mode. Now I can control light output properly. Thanks for the fix.
Thank you Alex made my life so much easier.. was trying to setup my sb910 with X1RN and was not sure whether to put the flash in manual or ttl mode... thanks again.
Thank you. I was checking this item before buying it. Now i know that i need a transmitter and not a receiver. Thanks for saving me from this wrong purchase.
i was not getting. This video was very utility!!! Exist one explanation why the channel 09 and group C? I was trying Channel 01 and Group A and don’t go it. But after follow your tip all channels they work!
Bought this by mistake thinking it was a transmitter. Now I have a proper Godox Xpro transmitter but still have this $40 paperweight. Can I use this receiver to trigger a second flash?
Hey Alex, I was a canon user and had canon 600ex rt2 flash and now I have switched to sony a74 and got godox v1 pro flash for it with godox xpro2 trigger. Now I want to use my canon flash with sony a74 along with godox v1 pro for sony. I have godox X1 R for canon flash. I have put godox X1 R channel same as godox xpro2 for Sony camera but canon flash is not getting fired. Please suggest a solution.
I have mine set up as you described on a Yongnuo 680 but I can't change the power at all. The only way I can seem to get it to work is by putting the flash on manual and change the power on the flash itself. Then the trigger only fire off the flash. I wish I could change the power setting from the transmitter.
Hi Alex, I have x2t-c and x1r-c, both for Canon R6ii, my flash is Canon 580ex ii. I have set x2t and x1r same CH and GR, even i checked the ID, they are the same. But x2t seems not to trigger x1r. I pressed "test" on x1r, the flash worked, but when i pressed "test" on x2t, the flash did not work. Same as when I press the shutter button on R6ii. Is there anything I missed?
hello.thanks for the info. i have a question, if you can help me. if the camera sends the zoom in the camera after attaching the probabilist to the camera, can i automatically mode the flash in close ratio?
Very well explained , I'm just wondering I have a Godox xpro O trigger and want to use it with a Cannon 580 e mark 2 flash i wonder will it work to increase and reduce the power on that unit thanks again for the great and simple video
Hi Alex, very interesting! Just a question: is this system ok also for my Nikon SB800? The formula is: X1R (on top my flash Nikon SB800 in TTL mode) + XPRO in manual mode = I can manage my Flash as it was in manual! Is this correct? Tks!!!
Hi Alex! I have a question, does it works with another flashes like Neewer and so on? I have both, godox and neewer so I dont want to sell my neewer flashes, and I'll buy this receiver, but, if it works. Thanks for the video!
Yes it does. I use it with my Neewer flashes. You cannot control the power of the Neewer flashes through the Godox trigger and you will have to manually adjust it on the Neewer flash.
Good afternoon. How do you synchronize them with each other? you have different modes, TTL and Manual. We have a SB 910 flash mounted on the Godox XR1n and on the XPro n camera. and following your instructions nothing works. what could be the problem?
Thanks Alex. My situation is that I have an Olympus M1 Mark III camera and 3 Nikon flashes -And- 1 Phottox flash (For Nikon). Will the transmitter be the Olympus "O" version while the receivers be Nikon?
I haven't tested the X1R with an older flash using sync cable but, according to the manual, it could work. As for the transmitter, I'm almost 100% sure the XPro-o will trigger the X1R receiver.
Hi Alex I was really happy to find your video but unfortunately it didn't work for me. I'd tryed setting the flash in manual mode as the user manual says, tryed ttl as you suggested and the flash fires but I can not control the power from my transmitter. Any idea of what can be happening?
Hi there! I'm sorry I didn't reply earlier, but I'm glad it worked in the end. Just to keep an eye on other cases, what are the flash and camera you're using?
Hi Alex! Great tutorial. I was wondering if you know anything about using this with a Canon 430ex ii? I can get the manual and ttl function to work, but high speed sync eludes me. I'm shooting with an Sony a7iii and using the x-pro as well. I'm stuck at 1/125 as the fastest I can go. Is it the limitation of a pre-radio flash? It's not a deal breaker but as I shoot infant and portrait, sometimes a higher shutter speed is demanded. Thanks in advance and no worries if it falls outside your gear knowledge. Cheers
I have Canon 600 EX-Rt2 and want to connect it with Godox Xpro2 for Sony. As shown in this video, I have set the same channel of Godox X1-R for Canon with Godox XPro2 but its not firing Canon flash. Do you have any suggestion? Thanks in advance.
The X1R has a 2.5mm jack connection on the side that, according to the manual, can be used to trigger wired flashes, like Alien Bees. I have not tested this combination, but I'll share my findings as soon as I do :-)
x1r only works for their dedicated brand flash (nikon, canon, fuji and sony). most third compatible brand will not works even it can trigger the flash (maybe some can work). if so, better get a cheaper or used trigger transmission paired with your dedicated x1t and x2t transmitter.
Всё это обман, у меня никон д780, объектив к примеру 80-200 2.8 и 35мм 1.4 сигма арт, приёмник этот , и синхра Годокс х про N, передаёт информацию да о том что надо сверкать,в режиме М она не передаст информацию с какой силой сверкать, в режиме м выдержка до 1/200 , на кнопку тест жать если - сила вспышка вообще другая, диафрагму бывает показывает другую вообще, после нажатия фоткать - появляется , и самое главное, не видит сколько мм объектив, если у вас зум, то всё ппц. Годокс это ужас, тех поддержка не знает, у них нет даже оборудования это протестировать ... Типа нет сторонник объективов , а как они создали приёмник?? ведь он для оригинала никон... Вообщем оооочень дорого для такого плохого оборудования, годокс это шляпа которая не стоит своих денег..
Thank you! Your demonstration was very easy to understand. Just received an X1R N and a X2T N. I will use them on my D850 with my SB-900 and SB-800. You saved me a lot of time.
Your tutorial is the one that makes the most sense. I have a Nikon SB910 and bought both the receiver and transmitter, but had no clue how to use them....till now. Thanks
Hi Alex, very nice clean presentation. Since I'm purchasing the XpropN TTL transmitter, I am now shopping for the best receiver units for it. Your video popped up and I wasn't disappointed. Great job! I wish you all the best.
Thank you Alex. I was a Pocket Wizard user for years but got tired of replacing them. This video's and your Xpro-N video got me up to speed quickly.
That's great!
Very helpful! I recently got both the receiver and transmitter, but hadn't done much experimenting on actually using them. This saves a lot of poring over the manuals!
Concise and to the point. Thanks!
Super! Thank you Alex!
I have been looking for a video to remind me how to control my X1r-S power output while using my Godox Trigger. I've lost my manual and can't seem to find one. Yours was the only video that said to put my X1r-S connected flash in TTL mode. Now I can control light output properly. Thanks for the fix.
Thanks for your comment, I'm glad it helped :-D
Wowww great video
very helpful
Thank you Alex
made my life so much easier..
was trying to setup my sb910 with X1RN and was not sure whether to put the flash in manual or ttl mode...
thanks again.
Thank you. I was checking this item before buying it. Now i know that i need a transmitter and not a receiver. Thanks for saving me from this wrong purchase.
Glad I could help
i was not getting. This video was very utility!!! Exist one explanation why the channel 09 and group C? I was trying Channel 01 and Group A and don’t go it. But after follow your tip all channels they work!
Excellent! Thanks for the comment :-)
I followed the instructions and it worked but I can’t modify the power. I’m using it on a sb800.
Thank you, for the demo.
Thank you!!! very helpful
Thanks , i was missing the ttl mode on the nikon flash,
Bought this by mistake thinking it was a transmitter. Now I have a proper Godox Xpro transmitter but still have this $40 paperweight. Can I use this receiver to trigger a second flash?
I was hoping you would cover how to enter the menu mode to change the ID for instance.
Hey Alex,
I was a canon user and had canon 600ex rt2 flash and now I have switched to sony a74 and got godox v1 pro flash for it with godox xpro2 trigger. Now I want to use my canon flash with sony a74 along with godox v1 pro for sony. I have godox X1 R for canon flash. I have put godox X1 R channel same as godox xpro2 for Sony camera but canon flash is not getting fired. Please suggest a solution.
Does it support QS400ii lighting head
Can I trasmit signal using godox nikon receiver X1-R (N) with my nikon flashes but my camera is fuji using transmitter Godox Xpro (F).
Good question!
I have mine set up as you described on a Yongnuo 680 but I can't change the power at all. The only way I can seem to get it to work is by putting the flash on manual and change the power on the flash itself. Then the trigger only fire off the flash. I wish I could change the power setting from the transmitter.
the same problem here!
Já usou e deu tudo certo na câmera?
Sir I have godox trigger and elinchrom rx4 light. So can i connect rx4 to godox receiver and control elinchrom rx4 light with godox trigger
Hi Alex, I have x2t-c and x1r-c, both for Canon R6ii, my flash is Canon 580ex ii. I have set x2t and x1r same CH and GR, even i checked the ID, they are the same. But x2t seems not to trigger x1r. I pressed "test" on x1r, the flash worked, but when i pressed "test" on x2t, the flash did not work. Same as when I press the shutter button on R6ii. Is there anything I missed?
Great video!
Glad you enjoyed it :-)
hello.thanks for the info. i have a question, if you can help me. if the camera sends the zoom in the camera after attaching the probabilist to the camera, can i automatically mode the flash in close ratio?
thanks man i could not change the power output and i thought i had a problematic device!!! I am dissapointed i cant change the power output
awesome video. can it work with quantum q flash trio for canon or the Quantum Qflash Pilot. thx
nice work! maybe it works well since they're both nikon systems, do you know if it works with pc cable?
I'm not sure it will work with PC cable, I actually don't like those. What flash are you trying to fire?
Very well explained , I'm just wondering I have a Godox xpro O trigger and want to use it with a Cannon 580 e mark 2 flash i wonder will it work to increase and reduce the power on that unit thanks again for the great and simple video
Can 1 receiver power 2 flashes, or do I need 2 receivers
One transmitter (X1t) and 2 receptor (X1r)
Is the new Godox X2 able to trigger the X1R? Please advise!
yes, it is.
Hi Alex, very interesting! Just a question: is this system ok also for my Nikon SB800? The formula is: X1R (on top my flash Nikon SB800 in TTL mode) + XPRO in manual mode = I can manage my Flash as it was in manual! Is this correct? Tks!!!
That sounds right to me :-)
Did it work for you ? My flash shoots but I can’t modify the power from the trigger.
The camera is missing. Since flashes/speedlites are used in photography, I would like to see how this works with the camera.
Hi Alex! I have a question, does it works with another flashes like Neewer and so on? I have both, godox and neewer so I dont want to sell my neewer flashes, and I'll buy this receiver, but, if it works.
Thanks for the video!
Yes it does. I use it with my Neewer flashes. You cannot control the power of the Neewer flashes through the Godox trigger and you will have to manually adjust it on the Neewer flash.
I'm unable to adjust the power on the Flash X1R N from the Xpro C.. I kept TTL on d flash n M on the Transmitter
Good afternoon. How do you synchronize them with each other? you have different modes, TTL and Manual. We have a SB 910 flash mounted on the Godox XR1n and on the XPro n camera. and following your instructions nothing works. what could be the problem?
Thanks Alex. My situation is that I have an Olympus M1 Mark III camera and 3 Nikon flashes -And- 1 Phottox flash (For Nikon). Will the transmitter be the Olympus "O" version while the receivers be Nikon?
Hi there! Yes, that sounds correct.
Can I use this device to trigger an older flash via sync cable vs hot shoe? And can an XPro-O trigger this device?
I haven't tested the X1R with an older flash using sync cable but, according to the manual, it could work. As for the transmitter, I'm almost 100% sure the XPro-o will trigger the X1R receiver.
Hi Alex I was really happy to find your video but unfortunately it didn't work for me. I'd tryed setting the flash in manual mode as the user manual says, tryed ttl as you suggested and the flash fires but I can not control the power from my transmitter. Any idea of what can be happening?
Did you figure this out? I'm struggling with the same issue!
@@Zara-dt4gc Hi Zara, at that time I had already ordered a the new X pro also from Godox. It came, I had set the SB 800 in TTL mode and .... It Works!
Hi there! I'm sorry I didn't reply earlier, but I'm glad it worked in the end. Just to keep an eye on other cases, what are the flash and camera you're using?
Brilliant..... ;-)
Hi Alex! Great tutorial. I was wondering if you know anything about using this with a Canon 430ex ii? I can get the manual and ttl function to work, but high speed sync eludes me. I'm shooting with an Sony a7iii and using the x-pro as well. I'm stuck at 1/125 as the fastest I can go. Is it the limitation of a pre-radio flash? It's not a deal breaker but as I shoot infant and portrait, sometimes a higher shutter speed is demanded. Thanks in advance and no worries if it falls outside your gear knowledge. Cheers
Hi there! It's been a long time, did you manage to solve this problem?
@@alexsilva_co I did thank you 🙏
I have Canon 600 EX-Rt2 and want to connect it with Godox Xpro2 for Sony. As shown in this video, I have set the same channel of Godox X1-R for Canon with Godox XPro2 but its not firing Canon flash. Do you have any suggestion? Thanks in advance.
How can I use a receiver with a flash that is wired (no hotshoe)?
The X1R has a 2.5mm jack connection on the side that, according to the manual, can be used to trigger wired flashes, like Alien Bees. I have not tested this combination, but I'll share my findings as soon as I do :-)
Can the receiver be triggered by a non godox HSS trigger like Triopo G1?
Hi! I looked up the Triopo G1, but it doesn't seem to be compatible with Godox.
x1r only works for their dedicated brand flash (nikon, canon, fuji and sony). most third compatible brand will not works even it can trigger the flash (maybe some can work). if so, better get a cheaper or used trigger transmission paired with your dedicated x1t and x2t transmitter.
nice tutorial ... I hope I can use it with a strobe so that I can use this remote
so it can be use with strobe or not? I'm thinking of getting one if it can be use with my hensel strobe
it doesent change the power of a differnet flash it just triggers it and i tried it you didnt even show it
Всё это обман, у меня никон д780, объектив к примеру 80-200 2.8 и 35мм 1.4 сигма арт, приёмник этот , и синхра Годокс х про N, передаёт информацию да о том что надо сверкать,в режиме М она не передаст информацию с какой силой сверкать, в режиме м выдержка до 1/200 , на кнопку тест жать если - сила вспышка вообще другая, диафрагму бывает показывает другую вообще, после нажатия фоткать - появляется , и самое главное, не видит сколько мм объектив, если у вас зум, то всё ппц.
Годокс это ужас, тех поддержка не знает, у них нет даже оборудования это протестировать ... Типа нет сторонник объективов , а как они создали приёмник?? ведь он для оригинала никон...
Вообщем оооочень дорого для такого плохого оборудования, годокс это шляпа которая не стоит своих денег..