You good sir is the Agar to helping us all with your kind knowledge. I’ve invested so much time with your videos. I have absorbed so much knowledge that I’d love to visit your shop one day. I’m about 4 hours away from your shop.
Seriously there's no one better in the audio game than these guys and they're local to me which is awesome. Im looking at a new RAM... if i get it im bringing it to them.
Such a great video. I have the 2023 Ram with the 12" and Alpine system. Not a lot of reference material out there to help me figure out what to do. I ended up reusing my Pac AmpPro from an older Dodge build with the new harness to properly integrate. I wasnt able to do all the things you did, but it really helped me map it out, and I thank you.
Great video! My solution to the Ram's 3.5 dash and 6x9 front door sound stage issues with aftermarket speakers was this: 6.5 component cone in the door, 3.5 coax in the dash, with an l-pad attenuator at -6db and a bass blocker at 1.2khz for the dash. Dashes are powered by the factory stereo (12w), and the doors are powered by a small alpine amp (45w). All in all, sounds great for a passively crossed over and attenuated setup. No distortion, gets plenty loud, and the dashes are less bright, and more bearable now! Been happy with it so far! -cheers EDIT: Would love to know what frequencies and slopes you crossed over the front doors to the dashes in the DSP!
Thanks for this. My question is, if it already had a full set of reference 6x9s, would y'all have just desoldered the tweets on the front set, or just crossed out the highs with your dsp?
You sir need to be a little more considerate. Pecking on Flippin everything. Had me checking my door every few minutes. Not to mention how crazy my dog was going. I guess I'm fortunate that I didn't have my ear monitors in. Other than that, great job. Beautiful work. Thanks for reviewing my advice.
Big fan of y'alls TH-cam channel; wish y'all had a shop near Dallas,TX. I recently took my 2016 Ram 1500 ( crew cab w/Alpine sound system ) to a local shop and they installed ( 2 ) 12" JLs ( none ported box ) ; ( 1 ) JL Amp and ( 1 ) PAC AmpPRO to keep the factory head unit -- the doors and the dash speakers are still factory. And I have to say, the sound quality is poor, i hear what a lot of voice ( I think that's called the highs ) -- I listen to all types of music.
Hello, a novice here. On a stock vehicle, I've heard dash speakers are connected to the front door speakers. Do you need to run new wires to the dash speakers to separate from the door speakers?
So just out of curiosity and hopefully you guys answer my comment because I’m really curious but those speakers that you put in that guy’s front doors- were they really necessary? I mean, I haven’t gotten all the way through your video yet so it kinda looks to me at this point that you’re gonna be bypassing the factory amp so I guess I could understand that but for somebody like me who is still using the factory amplifier, is it really necessary to change out those 6 x 9 woofers in the front doors? All I did was I used probably pretty much the same Speakers and rear door speakers that you guys did but opted not to bother with the front ones in the front doors because number one, I couldn’t find anything that was like those and second, being that my bass comes from a JL audio stealth box loaded with 2 10 inch subwoofers that’s powered from a two channel 600 W amp from JL audio, I really just didn’t see the need to change those.
Can the top metal covers on the top of amplifiers not be slid out and reversed to have the graphics to match in the correct orientation? It might not be possible because of the heat sink design, just curious.
when integrating with the DSR1 does the factory amp still work? what I mean, is if I add amps for Sub and front stage, will the rear door drivers still be receiving signal and amp power from the factory amp?
Not worth it!! Trust me I’ve had a 19 and a 22 ram. The 19 with alpine and 22 with Hardon. The only upgrade worth the time and money is amp and DSP along with speakers. I’m pretty sure I’ve heard dean say this as well for this truck.
Hey dean, awesome build as always. Just a heads up, one of your subscribers who is a constant contributor in the live shows scammed me on some gear. Not your problem of course, just wanted to let you know. She even claimed she texts you directly. Beware
I have a 21 ram. I ordered amppro and am going to run digital optical out to a dm-810 and then to an 8 channel kicker for the mids and highs. My question is will I have enough factory wires to bi amp the speakers or will I need to run additional wires? I was assuming since harman kardan has 19 speakers that they would have done that from the factory but am I mistaken?
If I have 2 way 3.5 in the dash corners and 3 way 6x9s in all four doors on a separate channel plus the Subwoofer behind the back seat and a DSR1 active 8 channels DSP... What crossover settings should I start with each set of speakers not to compete with each other??
Can anyone tell me how they ran the speaker wire to the amps? Did they run new wires or tap into the factory speaker wires? I want to amp my door speakers but there isn't any way to run new speaker wires.
I have the same stock system in my truck, I was looking at putting in the 2 way 6x9 in the doors. Would they be better? I don't really want to spend to much for amps and subs and all that. And I've seen some saying I need to bypass the anc and some say no.
I just got a 2019 Honda accord I want to install a subwoofer and door speakers it doesn't have a subwoofer what kind of hardness do you recommend. It only has 4 speakers.
As a six channel Amp would love to know how that 644watts max is spread out between the channel. In other words how much power from each channel and how low can you go with the ohms?
Probably won't but he will show you what sites to become an installer we all need to be a customer of dean's and Fernando for all the free TH-cam videos we get much love
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
You good sir is the Agar to helping us all with your kind knowledge. I’ve invested so much time with your videos. I have absorbed so much knowledge that I’d love to visit your shop one day. I’m about 4 hours away from your shop.
Seriously there's no one better in the audio game than these guys and they're local to me which is awesome. Im looking at a new RAM... if i get it im bringing it to them.
Such a great video. I have the 2023 Ram with the 12" and Alpine system. Not a lot of reference material out there to help me figure out what to do. I ended up reusing my Pac AmpPro from an older Dodge build with the new harness to properly integrate. I wasnt able to do all the things you did, but it really helped me map it out, and I thank you.
Great video! My solution to the Ram's 3.5 dash and 6x9 front door sound stage issues with aftermarket speakers was this: 6.5 component cone in the door, 3.5 coax in the dash, with an l-pad attenuator at -6db and a bass blocker at 1.2khz for the dash. Dashes are powered by the factory stereo (12w), and the doors are powered by a small alpine amp (45w). All in all, sounds great for a passively crossed over and attenuated setup. No distortion, gets plenty loud, and the dashes are less bright, and more bearable now! Been happy with it so far! -cheers
EDIT: Would love to know what frequencies and slopes you crossed over the front doors to the dashes in the DSP!
Only people i wouldn’t mind paying an arm and a leg to hook my music up. Clean installs and clean
Love and Enjoy the full builds.
Thanks for this. My question is, if it already had a full set of reference 6x9s, would y'all have just desoldered the tweets on the front set, or just crossed out the highs with your dsp?
Just cross them over at 2-3 k or just sell them and get components
You sir need to be a little more considerate. Pecking on Flippin everything. Had me checking my door every few minutes. Not to mention how crazy my dog was going. I guess I'm fortunate that I didn't have my ear monitors in. Other than that, great job. Beautiful work. Thanks for reviewing my advice.
Funny for me- Exterior Tesa tape comes apart much easier as its tougher to unpeel, than the fuzzy tesa Tape that fuzes itself.
Great video gentlemen.... Just curious on what amp rack location you would choose for a 1500 with etourque...
Have you guys done a multi channel amp in a RAM with the HK system? If so what parts did you use to integrate?
Great video. Thanks for sharing!
Big fan of y'alls TH-cam channel; wish y'all had a shop near Dallas,TX.
I recently took my 2016 Ram 1500 ( crew cab w/Alpine sound system ) to a local shop and they installed ( 2 ) 12" JLs ( none ported box ) ; ( 1 ) JL Amp and ( 1 ) PAC AmpPRO to keep the factory head unit -- the doors and the dash speakers are still factory.
And I have to say, the sound quality is poor, i hear what a lot of voice ( I think that's called the highs ) -- I listen to all types of music.
Hello, a novice here. On a stock vehicle, I've heard dash speakers are connected to the front door speakers. Do you need to run new wires to the dash speakers to separate from the door speakers?
Fantastic job!! 👌
So just out of curiosity and hopefully you guys answer my comment because I’m really curious but those speakers that you put in that guy’s front doors- were they really necessary? I mean, I haven’t gotten all the way through your video yet so it kinda looks to me at this point that you’re gonna be bypassing the factory amp so I guess I could understand that but for somebody like me who is still using the factory amplifier, is it really necessary to change out those 6 x 9 woofers in the front doors? All I did was I used probably pretty much the same Speakers and rear door speakers that you guys did but opted not to bother with the front ones in the front doors because number one, I couldn’t find anything that was like those and second, being that my bass comes from a JL audio stealth box loaded with 2 10 inch subwoofers that’s powered from a two channel 600 W amp from JL audio, I really just didn’t see the need to change those.
🔥build🔥very good quality video
What did you guys think of thr fox box? How was the output and how was it musically.? Nice and wide frequency response or very narrow???
I have the same factory alpine setup. What speakers would you run in dash, front & rear door for just a plug & play upgrade with the factory amps?
Can the top metal covers on the top of amplifiers not be slid out and reversed to have the graphics to match in the correct orientation? It might not be possible because of the heat sink design, just curious.
If I had 2k for labor alone and lived near you, this would be amazing for me lol
What did you use for the amp rack that went behind the back seat?
So you completely eliminated the center dash speaker, both 3.5” upper front door speakers, and both rear headliner speakers?
Just a sugestion: why not use some sound deadening behind the cabine... its a lot of bare metal !!!
I'm thinkin' you could have pulled the top panel with the logos and flipped it around...
I have a 2022 limited with Alpine system, just want to add a mono amp and a subwoofer, any recommendations on how to go about it.
You guys need to start asking the ram owners if it has E-torque. If they say no, there's no battery behind the seat
Quad cab? And what did you use to hold the amplifiers on the abs sheet?
when integrating with the DSR1 does the factory amp still work? what I mean, is if I add amps for Sub and front stage, will the rear door drivers still be receiving signal and amp power from the factory amp?
What would be best for just speaker upgrade 4 doors and dash keeping factory alpine amp for now on my 2022ram
Not worth it!! Trust me I’ve had a 19 and a 22 ram. The 19 with alpine and 22 with Hardon. The only upgrade worth the time and money is amp and DSP along with speakers. I’m pretty sure I’ve heard dean say this as well for this truck.
hi! just wanna ask about 2013 honda fit, is it possible the focal fpp 4100 4ch amp fit in underseat?thanks in advance
What does something like this cost?
Hey dean, awesome build as always. Just a heads up, one of your subscribers who is a constant contributor in the live shows scammed me on some gear. Not your problem of course, just wanted to let you know. She even claimed she texts you directly. Beware
I have a 21 ram. I ordered amppro and am going to run digital optical out to a dm-810 and then to an 8 channel kicker for the mids and highs. My question is will I have enough factory wires to bi amp the speakers or will I need to run additional wires? I was assuming since harman kardan has 19 speakers that they would have done that from the factory but am I mistaken?
my tradesman ram has the same 6x9
If I have 2 way 3.5 in the dash corners and 3 way 6x9s in all four doors on a separate channel plus the Subwoofer behind the back seat and a DSR1 active 8 channels DSP...
What crossover settings should I start with each set of speakers not to compete with each other??
Awesome Awesome Awesome Awesome Awesome Awesome Awesome Awesome Awesome Awesome Awesome Awesome
Is there a way to sum the head liner with the front dash speakers? I dont care about fade
How much I have to expend for something like that? I interesting a lot, and where are you situated ?
Can anyone tell me how they ran the speaker wire to the amps? Did they run new wires or tap into the factory speaker wires? I want to amp my door speakers but there isn't any way to run new speaker wires.
great video really enjoy the long videos....
I have the same stock system in my truck, I was looking at putting in the 2 way 6x9 in the doors. Would they be better? I don't really want to spend to much for amps and subs and all that. And I've seen some saying I need to bypass the anc and some say no.
Do you still need 6x9s?
So on the 6x9 do you recommend 0db or the +3
I just got a 2019 Honda accord I want to install a subwoofer and door speakers it doesn't have a subwoofer what kind of hardness do you recommend. It only has 4 speakers.
Go through their videos. They have done a couple of 2019 Accords. They show you exactly what you'll need. Hope this helps!
Where’d you get the box from?
As a six channel Amp would love to know how that 644watts max is spread out between the channel. In other words how much power from each channel and how low can you go with the ohms?
It’s just 100rms x 6 @ 2ohm
Do you guys know if the CH4 will work in a 23 Dodge Ram 1500, quad cab?
I don’t think it does
How much does this cost???
Do you guys ever build your sub boxes?
No ...everything they do is either prefab or built for them..Dean is the leader of Anti Dust Coalition
Dēja Vu!!!
Do my truck please. You guys know anyone in Hawaii ? 😅
where are you guys located I'd like to do a internship
Probably won't but he will show you what sites to become an installer we all need to be a customer of dean's and Fernando for all the free TH-cam videos we get much love
certification.mecp.com/
Wow” that’s way to much information!!! I had stop looking at the video 😵💫