Break barrel is evergreen. It doesn't matter a springer, gas ram or any fancy piston all mechanism and maintenance remains the same. It is self-contained and can shoot indefinitely.
Excellent instructional video. Nice job describing each step as you proceed. I think your English is quite good actually (Better than most American teenagers). Thanks for posting it.
What's up with people saying you're not talking loud enough? I can hear you just fine and I want to add that your English is perfect!!! This is coming from an American girl!! I don't know anything about rifles but I loved just hearing your voice LOL
My English speaking skills are poor (lack of personal talk with an Englishman) but my written English is at least decent. ^^ The Beeman Grizzly is a Chinese made airgun and disassembles a bit differently but not by much. I recommend you not taking it apart without a spring compressor. Disassembly is easy. If you remove the stock you will immediately see what next steps to do. You remove the piston by simply pulling it out. There is no other way. Maybe I'll do a video about tuning in the future.
Thanks for this vid, it was excellent. I wish I'd seen it before I did exactly the same job on my 95k! I did watch your video on the hw80 strip-down though, which was helpful. Just the end-cap was different really, as you said :)
absolutely fantastic tutorial. my air rifle (norica twin) has just been returned to me not working. i will now strip it and see whats up. new piston seal i think. 😉
I have a Yukon Magnum break barrel air rifle, I was able to get a couple shots out of it then I wasn't able to fully cock the barrell ultimately being unable to fire it at all, any suggestions on how to fix that problem ??
you speak really good English and you know the names of the parts. I haveto say though i found the accent challenging sometimes, it's that or my broken headphones where only one speaker works. HOW to best remove the piston, to avoid tearing the seal? Can you make another video on deburring and tuning? I have a Beeman Grizzly do you know how different it is and any idea of how i should change the disasembly?
Hmm, I can disassemble an AR receiver completely. But a break barrel air rifle I'm not sure. An as far as a spring exceeding 12 foot pounds, I know in Europe their air rifles are way more limited. But from what I've seen and heard, and have read. An just through my personal experience, there's really almost no need to ever even "clean" an air rifle. Especially the barrel, there will be basically next to nothing in it. An a little bit of lead fowl or build can actually even help. My thing is with PCP and break barrel air rifles, is just making sure that the O - rings and what not stay good, and don't dry up or start to leak or anything. An even with co2 air rifles, however I know that theres also a difference between the type on oils and lubricants you can use on them. You can just use that Crossman "Pelgun oil" on co2 air guns, but in the break barrels and pcp guns. You CAN'T use any petroleum based type lubricants, cause it will destroy the o - rings. But yeah they really don't get dirty or anything, it's literally just about keeping very few particular parts lubricated on them. An making sure you just blow them off and use them a little once in a while if they're sitting around. Cause that's what always happens with the co2 air guns, they'll sit unused for years. An then when you go m finally go back to use them, an put a co2 in. All the air just comes leaking out and spraying everywhere, because the seals and o - rings have dried up or cracked.
Very Good Video, i like the details in it, and what i like the most is the rubber technique, I would so much like to get a Weihrauch air rifle, But i'm addicted to Diana models, please see if you can upload a new dis assembly Video on a Diana Mod.34 thanks again for the brilliant video Regards
Could you please show me how to take the hw30s piston off the cylinder? After pulling out the spring, I just do'nt know what to do next. The way the piston is fixed is quite different from that you show in your vid.
Hi man i just bought a new air rifle. It is Weihrauch HW85 from KSA. It is labelled BSF 370 without Weihrauch name but Special made for Bin Humaid. It is 60mm barrel and 122cm in length. I tried to lube it using your videos but sorry man this applicable only in low energy weak spring rifle but if the opposite occurs it is like hell. It is very difficult.
HAHA! Man, I'm loving you and this channel! I just got into air rifles after moving to india where real guns are nearly impossible to get. I bought a cheap air rifle (about 40 euros) from a toy store to find that it was pretty consistent when rested. Besides a few crude manufacturing practices, it's an acceptable rifle for a tune up. Given that I can get most of the parts I need made, for within the same price I paid for the gun if not a bit more, I can make a pretty good one. I'm planning to put up a video soon before moving on to making a single shot bolt-action pcp like they do in indonesia.
Hi there, great video! I am currently having a firing issue with my KRAL Magnum .22 break barrel. It was working fine a few months ago, but was stored for a while and now wont fire. When i try to cock it, it doesnt lock back like normal for loading the pellet, so i suspect it is cocked and ready to fire. However, when i pull the trigger nothing happens. I have no access to a local gunsmith, but i am hesitant to dismantle it as i have no idea what will happen if it IS cocked. Could you suggest any course of action? is there a chance it could go off in my face if i try? Thanks
Yeah it is designed a little differently. You take out the two pins and then you have to do a little trial and error. Read this, maybe it helps: www.gatewaytoairguns.org/GTA/index.php?topic=30626.0
I wanted to say ur english is good its just you need to use slang, ur useing too proper english were it stays a little monotone and it would smoothen it up a bit but slang is like aint gonna yall ect
I hear all sportsman series pellet guns have the same internal components for beeman brand. I bought a beeman "Kodiak Silver x2" from walmart and it has the advertised 1,000 fps when using the .177 barrel. This looks like a better built version of my China beeman but should be identical if (when) i need to replace something right? Besides this being wood stock with nice metal trigger guard where mine has a synthetic stock and plastic trigger guard the guts and disassembly are the same......right? When something does go wrong would it be worth replacing it or will something else go bad soon and i should just buy another for 100 dollars? Thanks
I do not know what sort of mainspring you have in that, but to disassemble one without a spring compressor is just asking for injury ir worse. The European springs mst be quite a bit more low powered than I have read, or else spring technology has entirely changed in the kast decade.
I got a Gamo Silent Stalker Whisper an it has so much recoil from the IGT it's almost impossible to keep a scope from creeping after each shot. Im about ready to weld a set of mounts on it. Sure wouldn't hurt the top any. It's all marked up from the first day. I extended the screw that came down out of the scope mount as a stop, as which this is what it was for. This was factory from Gamo. The force of each shot made a scar a sixteenth longer after each & every shot, then it snapped in half. The rifle is made from very soft aluminum alloy. I noticed just how cheaply made it was after the very first day of trying to tighten the screws on the scope mount. I've had 3 scopes on it, an have yet gotten it to stay in one place. I used locktight before, im hoping today it will hold. So be careful if anyone buys Gamo. There metals are cheap. $260 piece of shit.
11 years later and this remains the best video of an air rifle dissassembly. Thank you
You are welcome! 😄😄👍👍
Break barrel is evergreen. It doesn't matter a springer, gas ram or any fancy piston all mechanism and maintenance remains the same. It is self-contained and can shoot indefinitely.
And less o-ring seals to worry about, for sure.
As someone else said you speak English better that most Canadians and Americans. I'm Canadian myself. Great video
Thank you for taking the time to make and share this information. it is exactly what I was looking for.
Excellent instructional video. Nice job describing each step as you proceed. I think your English is quite good actually (Better than most American teenagers). Thanks for posting it.
Exactly what I was looking for! Thank you!
Outstanding, I thank you sir. This really helps. Very well presented. Look forward to seeing more of your videos.
This product works as advertised. The box did come a little broken but it works!
very nice. 😂😂😬😬🤜🤜
Very informative video. Thanks for posting this and for speaking in English so I could understand :D.
man nice scope i didn't know they made spring rifle scopes that big
I've been trying to find something to help with my HW90 disassembly for a while. Many thanks for this!
Nice and very informative video tutorials.. more thanks to you..
What's up with people saying you're not talking loud enough? I can hear you just fine and I want to add that your English is perfect!!! This is coming from an American girl!! I don't know anything about rifles but I loved just hearing your voice LOL
Volume is low on mydevice too.
Your english is actually very good !
I Have HW 100 KT, But Love Using the HW 95 Luxus.
Great Video.
i love how you go all arnold schwarzenegger on some words :p
My English speaking skills are poor (lack of personal talk with an Englishman) but my written English is at least decent. ^^
The Beeman Grizzly is a Chinese made airgun and disassembles a bit differently but not by much. I recommend you not taking it apart without a spring compressor. Disassembly is easy. If you remove the stock you will immediately see what next steps to do. You remove the piston by simply pulling it out. There is no other way. Maybe I'll do a video about tuning in the future.
2lbsTrigrPull I want to fuck
Thanks for this vid, it was excellent. I wish I'd seen it before I did exactly the same job on my 95k! I did watch your video on the hw80 strip-down though, which was helpful. Just the end-cap was different really, as you said :)
tombardier please reply 2 Pete mark 223 at gmail.com
I'd pay good $ for detailed vids on how to disassemble the TX200, Pro Sport, and 97K. Why is there not a channel dedicated to air rifle breakdown?
Very nice
It depends on the spring which is fitted to your rifle. But I mentioned it in the video. I guess you need a spring compressor.
absolutely fantastic tutorial. my air rifle (norica twin) has just been returned to me not working. i will now strip it and see whats up. new piston seal i think. 😉
I have a Yukon Magnum break barrel air rifle, I was able to get a couple shots out of it then I wasn't able to fully cock the barrell ultimately being unable to fire it at all, any suggestions on how to fix that problem ??
Great video.
Could you explain how you know which side to knock the trigger pins out? Thanks.
you speak really good English and you know the names of the parts. I haveto say though i found the accent challenging sometimes, it's that or my broken headphones where only one speaker works.
HOW to best remove the piston, to avoid tearing the seal? Can you make another video on deburring and tuning? I have a Beeman Grizzly do you know how different it is and any idea of how i should change the disasembly?
You need a spring compressor as it is a powerful spring.
@jinkjack
At first I wanted to remove them completely but I will re-upload them...
Hmm, I can disassemble an AR receiver completely. But a break barrel air rifle I'm not sure. An as far as a spring exceeding 12 foot pounds, I know in Europe their air rifles are way more limited. But from what I've seen and heard, and have read. An just through my personal experience, there's really almost no need to ever even "clean" an air rifle. Especially the barrel, there will be basically next to nothing in it. An a little bit of lead fowl or build can actually even help.
My thing is with PCP and break barrel air rifles, is just making sure that the O - rings and what not stay good, and don't dry up or start to leak or anything. An even with co2 air rifles, however I know that theres also a difference between the type on oils and lubricants you can use on them. You can just use that Crossman "Pelgun oil" on co2 air guns, but in the break barrels and pcp guns. You CAN'T use any petroleum based type lubricants, cause it will destroy the o - rings.
But yeah they really don't get dirty or anything, it's literally just about keeping very few particular parts lubricated on them. An making sure you just blow them off and use them a little once in a while if they're sitting around. Cause that's what always happens with the co2 air guns, they'll sit unused for years. An then when you go m finally go back to use them, an put a co2 in. All the air just comes leaking out and spraying everywhere, because the seals and o - rings have dried up or cracked.
Very Good Video,
i like the details in it, and what i like the most is the rubber technique,
I would so much like to get a Weihrauch air rifle, But i'm addicted to Diana models,
please see if you can upload a new dis assembly Video on a Diana Mod.34
thanks again for the brilliant video
Regards
Very good Video! vielen Dank!
Could you please show me how to take the hw30s piston off the cylinder? After pulling out the spring, I just do'nt know what to do next. The way the piston is fixed is quite different from that you show in your vid.
Hi man i just bought a new air rifle. It is Weihrauch HW85 from KSA. It is labelled BSF 370 without Weihrauch name but Special made for Bin Humaid. It is 60mm barrel and 122cm in length. I tried to lube it using your videos but sorry man this applicable only in low energy weak spring rifle but if the opposite occurs it is like hell. It is very difficult.
Proff. Dr. Wdael Hamez9 ABOULELA ALMEIRY d.
Prof. Dr. Wael Hamed ABOULELA ALMEI⌐╦╦═─⌐╦╦═─⌐╦╦═─⌐╦╦═─⌐╦╦═─⌐╦╦═─⌐╦╦═─⌐╦╦═─
Good gun man.
Meine Herr-Great video! Do you have any hollow ground (gunsmithing) screwdrivers? They make any gunsmithing job much easier, IMHO. John in Texas
I just used normal screwdrivers. ^^
Thanks for your comment.
Dobre, ziom.
Good video however I would not use my screwdriver for a hammer I would invest in a small hammer instead.
Is there any way to get more power it if one of these? maybe put 2p behind the spring.?
It is actually a HW95 luxus
Your videos are truly amazing! Could you do an assembly/ disassembly and maybe a tuning video for the RWS Diana 350 Magnum?
Sure we need that especially diana magnum 350 nitro piston.
I have a HW50 and wonder if both .177 BB's and .177 pellets can be fired in it without damage.
I really like those SOLO napkins.
HAHA! Man, I'm loving you and this channel! I just got into air rifles after moving to india where real guns are nearly impossible to get. I bought a cheap air rifle (about 40 euros) from a toy store to find that it was pretty consistent when rested. Besides a few crude manufacturing practices, it's an acceptable rifle for a tune up. Given that I can get most of the parts I need made, for within the same price I paid for the gun if not a bit more, I can make a pretty good one. I'm planning to put up a video soon before moving on to making a single shot bolt-action pcp like they do in indonesia.
varun009 Nice. ^^
Let me know when the video is up, I want so see it. xD
2lbsTrigrPull Totes!
They make even bigger scopes for air rifles with 32+ zoom.
Generally you are helpful
Someone used mine and now one of the barrels is stuck onto the gun and I can’t pull it out
good revive
Amazing accent
Scope is Autozoom and nightvision
How did you manage to solve the screw barrel?
where the gun brakes, can you place a o ring instead to seal better?
Germany is a Great country !
How to make it easier to break barrel a gas piston air rifle
are you going to light up one of those cigs,
Hi there, great video!
I am currently having a firing issue with my KRAL Magnum .22 break barrel.
It was working fine a few months ago, but was stored for a while and now wont fire. When i try to cock it, it doesnt lock back like normal for loading the pellet, so i suspect it is cocked and ready to fire. However, when i pull the trigger nothing happens. I have no access to a local gunsmith, but i am hesitant to dismantle it as i have no idea what will happen if it IS cocked. Could you suggest any course of action? is there a chance it could go off in my face if i try?
Thanks
Did you get a solution? I am experiencing the same problem.
@@elijahdurand3578 if its a nitro piston. Its fused together.
@@ineedvaccineitnice2152 Everything is spring loaded
@@elijahdurand3578 check the trigger?
@@ineedvaccineitnice2152 No, the barrel. The trigger also has a spring but it's just to return it to it's original position after being pulled.
right.
Question: can I use a grease that for “guns” or does it have to be grease labeled for air guns?
You can use the oil that is for normal rifles and guns
lonewolf trucker what are Orings
They are rubber rings that are supposed to keep things sealed. Once those fail then you have air leaks, etc.
Jmedi5 5 thanks 🙏🏼
what were the individual dimensions of the barrel, and stock once you disassembled into 2 peices?
thank you great effort! I have a question? my norica65 trigger unit looks different can you advice me how to take it out?
Yeah it is designed a little differently. You take out the two pins and then you have to do a little trial and error. Read this, maybe it helps: www.gatewaytoairguns.org/GTA/index.php?topic=30626.0
#2lbsTrigrPull My pellet gun (Power Line 1150) doesn't cock, what can i do about that ?
I wanted to say ur english is good its just you need to use slang, ur useing too proper english were it stays a little monotone and it would smoothen it up a bit but slang is like aint gonna yall ect
To jest co2?
Yea I need a spring also mine different
I hear all sportsman series pellet guns have the same internal components for beeman brand. I bought a beeman "Kodiak Silver x2" from walmart and it has the advertised 1,000 fps when using the .177 barrel. This looks like a better built version of my China beeman but should be identical if (when) i need to replace something right? Besides this being wood stock with nice metal trigger guard where mine has a synthetic stock and plastic trigger guard the guts and disassembly are the same......right? When something does go wrong would it be worth replacing it or will something else go bad soon and i should just buy another for 100 dollars? Thanks
Does the gas need to be replace
No gas needed. 😉
I do not know what sort of mainspring you have in that, but to disassemble one without a spring compressor is just asking for injury ir worse. The European springs mst be quite a bit more low powered than I have read, or else spring technology has entirely changed in the kast decade.
7.5 Joules springs. They are very easy to install. You just need to throw them in and shove the trigger housing into the cylinder.
Is this procedure good for a bee man 1040
I got a Gamo Silent Stalker Whisper an it has so much recoil from the IGT it's almost impossible to keep a scope from creeping after each shot. Im about ready to weld a set of mounts on it. Sure wouldn't hurt the top any. It's all marked up from the first day. I extended the screw that came down out of the scope mount as a stop, as which this is what it was for. This was factory from Gamo. The force of each shot made a scar a sixteenth longer after each & every shot, then it snapped in half. The rifle is made from very soft aluminum alloy. I noticed just how cheaply made it was after the very first day of trying to tighten the screws on the scope mount. I've had 3 scopes on it, an have yet gotten it to stay in one place. I used locktight before, im hoping today it will hold. So be careful if anyone buys Gamo. There metals are cheap. $260 piece of shit.
That's why I buy German airguns exclusively. They offer the best power/usefulness ratio and price/perfomance.
I have the same problem with my gamo rocket, brother
Bet their stock has dropped.. The guns are junk an ya cannot buy parts for them..
Jay
Super glue works wonders and with alittle wd40 will come off.
Spring is completely rusty
haha awesome buddy.
are you from Germany? sounds like that on your accent..
Could I do this to my RWS 350 Magnum?
Yes, it's about the same.
Why? Because it's too much work.
NX 100 air rifle lock ripeyring
I have the umarex surge (don't buy btw) and the barrel bolt seems to be loose or something making it very innacurate what should i do
Tough compared to TX 2oo MK3 , Thank you!
You are welcome!
@@2lbsTrigrPull please help me i have a problem with my silver falcon 5.5
Mostly looking at the back of two hands, with NO idea of what the fingers are doing where!
Thanks for watching.
can't take the stock off a Hatsan 95
why should I not dissasembly my airriffle if it is tunned with stronger spring in it ? what is the diference ?
+sak šdi what is the risk if you can answer me please ?
I trust the video cause he’s german 😂
Spring load sir riffle tiger mechanism
... good video ... but I wish you had a Ruger Black Hawk ... need help on that ...
how do you know the pins on the trigger unit were punched in on the left side?
Doesn't matter really. You can do the reverse too but make sure you don't punch them out and in from one side.
The barrel got a silencer
The washer between the barrel and piston are so tivht
I couldn't open the 2nd screw from trigger guard :\ ... i'm really worried
hurr durr fuck I tried to avoid it but a commentary about this was inevitable I guess...
@ jayden..lmao...i like that one..
Cost efficient
Those HW rifles, yes. They are durable and very cost efficient! 😄😄👍👍
Assembling my diana model 35 is quite a bitch compared to this it seems.
I dont know what i did wrong but the spring flew and hit my finger and i was bleeding like crazy
cayenne pepper will stop the bleeding.
ما طول زمبرك بندقيه جامو ستان سبطانه قصيره
Is this novritsch
Probably not. 😂👌
my barrel isnt breakin an locking wats wrong
he has porn movies accent lool
I also have a porn movies dick.
2lbsTrigrPull TMI
In my bullshit country, Romania, it is not possible to get such a wonderful rifle, due to stupid legislation.
Too bad. Air rifles are fun! 🤜🤜
Stewie griffin
Firearm still works but not as powerful
Not everyone has the hearing someone says they have. Of your going to make a how to video? Speak UP, CAN'T HEAR YOU !
YEAH OKAY I'M SPEAKING UP HOPE YOU CAN HEAR ME NOW KEN THOMAS!!!! 😬😬😂😂😂😂🤘🤘🤜🤜
My chahiy
I cannot watch it cant understand wtf he's saying
8 years later: He's speaking English crystal clear lol
Captain Kush lol I don’t remember writing this comment I was like 13 at the time and his English is not even that bad tf was I on about 😂
@@DeclanH250 damn I'm impressed you've kept the same YT account for 8 years 😂😂
Captain Kush yeah it’s pretty crazy basically a life time ago 😅
misuse of tools!!!!!!!!!!!!!