I was not expecting that broken spring, I thought you were just going to grease it! It's been four years since I disassembled my 34 for maintenance so I needed a video to refresh my memory. Obrigado...thank-you, from the United States. 👍
Is not needed to remove the barrel from the main pivoting point. Is enough that you remove the seeger ring and then the pin of the barrel charging lever under the barrel.
i have a very similar model to this. when ever i try and cock the gun by bending it back, it snaps back with prettty serious force. how can i fix this?
There are several factors that can lead to this problem occurring. Even a simple and common problem like a broken spring can lead to this. I can't help you without seeing the weapon, it's best to take it to specialized technical assistance.
Thanks I might disassemble it and see if I can solve this issue. I believe it’s trigger related because it will sometime cock properly when I push the trigger forwards
Was it still shooting fine with the broken spring or you could clearly feel something was wrong? BTW nice home made spring compressor very simple concept !
Depuis peu j'ai acquis par hasard le même modèle de décembre 1987 (made in west Germany) également dans un état proche du neuf, je suis tout fou avec. C'est un bon modèle à priori? Enfin j'espère... peut-être pas le ressort du coup🤔. Merci pour la vidéo.
Hey i have a rifle similar to this one, i bought it from second hand owner, problem is the front sight seems to be loosen and always fell of after I shot my rifle even after i tighten the screw, now that I tighten it too much the thread is broke. Any suggestion?
Cool video. I have a 20+ year old Diana 34 with a bent barrel. Not sure how that happened. Do you know where I can buy a replacement barrel? After watching this video, I am sure I’ll be able to switch it out np. Thanks.
Hey if anyone could helped please I'm freaking out as a hunter. My diana magnum 350 I took apart to clean jus inside of the stock and the cooking lever came out of position .. now pit back together it will not cock. Can anyone please help me asap .. thank u. I will give phone number to anyone who can help me over phone or web ..
I was not expecting that broken spring, I thought you were just going to grease it!
It's been four years since I disassembled my 34 for maintenance so I needed a video to refresh my memory. Obrigado...thank-you, from the United States. 👍
thanks for the positive comment
I am preparing to strip, re-stain, and Tru-Oil my Diana 34 stock. This video gave me the confidence to take apart my air-rifle. Thank you!
Thank you for the video. My 34 just broke the main spring. That was easy enough .👍
I do like your spring commpressor a well thought out simple design,well done.
thanks
Belli i fori per bilanciare il pistone 👏👏👏
Is not needed to remove the barrel from the main pivoting point.
Is enough that you remove the seeger ring and then the pin of the barrel charging lever under the barrel.
Is it really worth the price? Or are we just paying for the brand name?
really worth the price!
I still own an RWS 34 from 1983 and it still shoots perfectly, never had it apart and never broke a scope.
awesome thanks
Dez como sempre meu amigo. Att.João Luiz do RJ Brasil
Obrigado João!
i have a very similar model to this. when ever i try and cock the gun by bending it back, it snaps back with prettty serious force. how can i fix this?
There are several factors that can lead to this problem occurring. Even a simple and common problem like a broken spring can lead to this. I can't help you without seeing the weapon, it's best to take it to specialized technical assistance.
Thanks I might disassemble it and see if I can solve this issue. I believe it’s trigger related because it will sometime cock properly when I push the trigger forwards
@@jesseruks I am having the same problem it’s the trigger
replace the spring. although I have heard they are oversprung.
Was it still shooting fine with the broken spring or you could clearly feel something was wrong?
BTW nice home made spring compressor very simple concept !
Thanks. Yes, I already felt that something wasn't right, sometimes the action didn't trigger
Is it possible to leave the barrel connected to the compression tube yet still be able to remove the piston?
Steel safety guns were the best !!
Why is it that when I disassemble my barrel there's only the long spring and missing the short spring like yours.
Older type got one that's really old and the small one misses aswell
I need the trigger mechanism for this 34 where can i find it?
@@cjsmithmusic I'm sorry but I don't know how to help.
@JGSairguns thanks for your reply
Muito bom, estamos sempre a aprender coisas novas contigo, abraço
Fico feliz em saber
Good video
Just about to strip down Diana G80 that has not been fired in over 20 years. Is the process much different?
Hello, thanks for the comment.
I don't know how to answer, I've never seen any G80.
Hug!
I already have diana magnum 350 spring piston air rifle. Can I install nitro piston on it .?
Depuis peu j'ai acquis par hasard le même modèle de décembre 1987 (made in west Germany) également dans un état proche du neuf, je suis tout fou avec. C'est un bon modèle à priori? Enfin j'espère... peut-être pas le ressort du coup🤔. Merci pour la vidéo.
باقي جز مهم وهو جلدة الماصوره لابد ان تغير كل فتره وهي مهمه بكتم الهواء واخراج الصتمه بالقوه المطلوبه .
Perfeito
Bela geringonça para desmontar a mola. ;)
my air rifle's spring also broke.what caused it to break?ps: i have a second hand air rifle?
Hey i have a rifle similar to this one, i bought it from second hand owner, problem is the front sight seems to be loosen and always fell of after I shot my rifle even after i tighten the screw, now that I tighten it too much the thread is broke. Any suggestion?
I'm sorry but I don't know how to help
@@JGSairguns Ahh I see, It's okay then
Cool video. I have a 20+ year old Diana 34 with a bent barrel. Not sure how that happened. Do you know where I can buy a replacement barrel? After watching this video, I am sure I’ll be able to switch it out np. Thanks.
I'm sorry but I can't help, I don't know where to buy another pipe
@@JGSairguns ^ all good, thank you, I will keep my eyes peeled.
Hello. Where can I find a new lever pin for a diana mod 40?
Hello, I don't know how to help. Thanks for the comment!
Good day my gun is not firing it takes out things like plastic in the barrel I don't know what's that
this can indeed happen, it is the piston seal that is old, rotten and is disintegrating.
@JGSairguns yooh what am I going to do. The bullet just stuck nor move where I've inserted it 😕
Brother I need it help me,how can I get it and where
Muito bom !
Obrigado por assistir o canal, não se esqueça de se inscrever para não perder os próximos vídeos e activar o sino da notificações, abraço!
Saludos como Sele llama a la mira q está en el centro es para comprar una pero no sé cómo Sele llama si es mira central o mira tracera x favor??
@@valeraav70 Se percebi bem a pergunta, a parte de mira do meio se chama: alça de mira.
Donde puedo. Conseguir. La mira. De la escopeta. De. Dardos. De. Adelante. Y. La de. Atrás. Para. La marca. Diana 24
Não sei.
Nice
Molla troppo lunga,si rompono,hanno vibrazioni e la forza è uguale.anzi meno. Accorciare sempre🤜🤛
Price bos????
No sales
Bao nhiêu tiền khẩu đây vậy bạn ơi
Diana 350magnum price kittna hain bhai.
سلام برای فروش دارید نحوه ارسال و قیمت
Khau nay bao nhieu vay
Khẩu này bao nhiêu tiền việt nam đồng
Just replace the spring
👍👍👍
Có ban khong em muốn mua 1 cái
Toi muon nhơ anh tu van
Ketakeha bae
Chp hoi co ban ko a
Nhieu cay sung ban
Hey if anyone could helped please I'm freaking out as a hunter. My diana magnum 350 I took apart to clean jus inside of the stock and the cooking lever came out of position .. now pit back together it will not cock. Can anyone please help me asap .. thank u.
I will give phone number to anyone who can help me over phone or web ..
ยากได้มาก
Bast are dania gun
Cho xin sdt toi anh tư van
Weihrauch Is Better