I’m having trouble atm and could use your advice plz. Have the aurora r11. It came with 8gb hyperx fury 2933 ram. I upgrade to 16gb 3200 Corsair’s vengeance. Worked with np. Trying to add 16gb same ram and brand. Won’t load. Reseated? Same problem. What am I doing wrong?
As someone who's never cracked open her PC for any reason, this seems much simpler and WAY less scary than I originally thought. I'm gonna see if I can install these myself, wish me luck!
Thank you dude. Your video helped me out. Got a used R9 after my even older R4 took a dump and I upgraded the memory to 32gb and it was good to know what to expect. Older system but it was still dead on. Thanks again!
Hello Gamer Heaven, I followed your instructions and came up with a few bumps which I solved and hope others will learn from my discoveries. Used the Corsair Vengeance LPX DDR4 (4x16GB for 64GB total RAM). System: Alienware R14 Ryzen (AMD Ryzen 9 5900 (12-Core, 70 MB Total Cache, Max Boost Clock of 4.7 GHz) So at first the PC would not even see the new RAM. I unplugged the power cord from the rear of the PC, removed the MB Battery, waited a few minutes then inserted the four sticks of RAM, then re-inserted the battery. This enabled me to get to the "BIOS has changed" screen. Here is where it deviates from your instruction... After getting into the BIOS settings, I changed the "AUTO" setting to "CUSTOM", filled in the pertinent Frequency of 3600MHZ and set the power at 1.36V, clicked on "save and reboot". The machine shut down but NOTHING happened. No happy electrons flowing through semi-conductors, I mean NOTHING. The PC didn't even power up. Evidently it didn't like something in the new setup. Unplugged from the PC, removed the MB battery, waited a few minutes, removed and reinserted the RAM, powered up and I had 64GB of RAM but running at 2100MHz. Went to REDDIT and found that the frequency needs to be divided by 2! On the BIOS settings, where you put in the Frequency of the RAM, use only 50% of whatever you're trying to upgrade to. In my case, I kept using 3600MHz and the machine didn't like it one bit. I read in another post here that you take the desired frequency and divide by 2. So I did that, used 1800MHz instead of 3600MHz and inserted the desired power of 1.36V, left the other settings at 0 (tCL, tRCD, tRP and tRAS) saved and rebooted. BAM!! Running at 3600MHZ with all four slots used! Memory: Corsair Vengeance LPX DDR4 (4x16GB for 64 GB of RAM) 1.36V
This helped a ton. To add to it, I found a Dell forum discussing memory overclocking & found this useful comment regarding the manual customization (for 32GB 3200MHz): “Memory Voltage: Manual Adjust memory voltage value: 1.38V (If I do 1.39V, I think 3DMark crashed. I may try this again next time) Memory Frequency: 1900Mhz (NOTE: I started at 1600Mhz, but is stable at 1900Mhz) Tcl: 14h Clk Tcdrd: 17h Clk Tcdwr: 14h Clk Trp: 14h Clk Tras: 32h Clk” after setting these myself, I now have 3200MHz of RAM according to the Alienware control center. 3D Mark ran a benchmark just fine as well.
@@Duck0fDoom Hey I'm trying to upgrade my R10 to 2 16gb sticks of 3200, corsair vengeance brand. I had to use a custom setting to get it to recognize the 3200, but for some reason I cant get any clicks better than 22-22-22-56. i have the voltage set to 1.3v right now. Do I need to up the voltage or do you have any other ideas? btw - using OC1 / OC2 wont boot the PC... hence the reason I'm going custom. Also, the SPD when I checked CPU-Z says it should be 16-20-20-38-58 at 1.35v. Cant seem to manually put in 20's for Tcdrd/Tcdwr/Trp as it only goes to 19.
@@brewskii001 I’ll be honest I don’t know anything about this stuff man, I just did a bunch of googling & read what people who’re smarter than me had to say lmao But the above solution is what worked for me. I find if you get stuck on something, just google what specific part you’re stuck on & keep reading forum posts. Good luck man
@@Duck0fDoom no worries I’m workin with a r10 so it’s probably more problematic. Just out of curiously what click readings are you getting on your new ram?
Hey Kevin, I just shucked my R10 this morning. Took out the 5950x, 6800xt, and the 2TB SSD and placed it into my tempered glass Corsair case with RGB fans from a previous build. Looks A LOT better than the R10 case and the cooling is WAY better. I bought a Gigabyte Aorus X570 Master Mobo and a 1000 watt power supply as well as a Corsair H115i AIO to complete the build. Already had 32Gb of G Skill Trident RGB RAM at DDR4 3200mhz from my previous PC that I grandfathered in to this build. Threw in an old Soundblaster Audigy Rx for good measure to round things out with my speaker setup. Stay safe with the tropical storm coming our way. Keep up the videos, they're great!
Pretty much did the same thing with my R10... Ryzen 5900, 1TB SSD & GPU from Alienware... Put everything into a Fractal Design Meshify C with an Aorus B550 Pro MoBo I got on as an open box special for $100. 32GB 3200Mhz T-Force RGB RAM. HOWEVER... not to long after that... I was able to snag an Aorus Master 3070 Ti for MSRP at launch... and to my surprise...but not really surprised... the Aorus 3070 Ti performs better than the Dell 3080 (Don't care about mining hashrate). My 3070 Ti boosts higher, runs cooler, is quieter and has consistently higher FPS. It is also more aesthetically pleasing in my case (LCD screen and RGB lighting). I flipped the Dell 3080 card on eBay for $1700 (hate me or not... but I needed to pay back Dell Financial Services for the credit I used to buy the Alienware).
Awesome. I have an Aurora R8, but the basics are very similar and after only a couple of tries everything worked great and at about 1/3 of the cost of going through Dell for this upgrade. Thanks man.
I upgraded the RAM of my Aurora R10 Ryzen Edition from 16 to 32GB. I used the same memory that came with the PC (Kingston Fury 3200). The Aurora did start but only with 2933Mhz. So I made one change in the Performance Option (Memory OC XMP): I changed mem oc2 to mem oc1. Now the RAM ist working fine with the correct speed of 3200Mhz.
@@Mr.FrodoBaggins In the end i had to upgrade to 32GB oem-memory kit because of some strange startup-behaviour. OEM-memory is the only memory that is guaranteed to work. These Auroras are extremly picky when it comes to aftermarket-memory support.
@@johnnyramone3535 hi... I have the r10 as well. Im planning to upgrade & I checked the specs...it says that four 8 gb sticks is not a supported configuration...so I have to use two 16gb or four 16gb. Maybe thats why u had an issue with four 8 gb.
Finally pulled the trigger on the 32 gig upgrade last night with my mining profits for my r11. Your channel has been a big help for me bud, I appreciate you.
Amazing help. Thank you. And thank you for your humor. It is both spot on, appropriate, and made me laugh throughout my new RAM install. Now onto your SSD upgrade video. Cheers, my dude!
Thank you for this video, I am using it to learn how to open my R11 and install the ram (as well as clean the dust) I myself had gone with Kingston Fury Beast (x2 32gb sticks) I was going to go corsair but dell states fury and xmp as the supported types (I know it works with corsair via your video) but my local store has a "if it works with our PC's but not with yours, it is not defective no refund" so I decided to play it safe and buy the Fury type. Thank you again so much for the video, I am very computer illiterate and this was very easy to understand with how you were explaining everything and how you have everything time stamped so I can easily find what I am looking for on my phone while doing this.
I'm a little late to the party here, but I can speak on why people make a big deal of working on the Alienwares, which is that in the case of memory specifically, not all memory is fully compatible and may not reach full speeds. I literally just spent a couple hours scouring the internet to see what all is compatible, and the answers seem to be pretty inconsistent. Appreciate you doing this show and tell though. Helps to see the RAM you used and that it actually works in a real world scenario.
This video really helped me upgrade the RAM in my R11. Or at least, it should have. I bought the exact same RAM sticks seen in this video, and had the power button flash yellow four times, indicating a memory or RAM failure. How did you get 3600 mhz sticks to work on a computer rated for a maximum of 3400?
I probably should have looked this up before hand, but I'm thrilled to say I not only had the same motherboard, but got the same replacement memory 😂 thank you.
Holy cow! You've given me so much information I love it! I'm completely new to the PC community and I just purchased the R12 3070, I would love to learn more about what I need to upgrade and also down the road how to upgrade into a better gpu!
I'm not sure if you can fit anything better than a 3070 into the r12. The newer gpus might be too big for the case, unless you remove your gpu fan. The 3070 is still really good, it will seldom bottleneck your gaming experience.
THANK YOU. And whoever said to take out CMOS battery for a few minutes. I doubled my RAM and now have 32 gb and finaly won't have to worry about games. :D The usage kept steadily hanging on 50% idle and 70% doing light games, but anything like RLcraft, Ark, etc it was 90%. Time to test the new stick now. 👀👀
Subbed. Keep up the content. I’ll be getting an Alienware R10 in the next couple weeks (my first prebuilt) because I can’t get the parts to build my own for reasonable price. Plus I can get a 17% off employee discount :) to further my $$$ I am thinking of doing a certified refurbished, which would give me a 3080 system for about $1600. The only drawback would be if I added an extra fan and extra thermal paste on the GPU, I would be voiding a warranty on a refurbished PC
This guy does a great job of showing you how to get it installed and all but there are many and I mean many of us who did exactly what he did and are having issues. XMP seems to either cause no booting or complete instability when working. I had to put the ram sticks in slots 3 and 4 to work and turn XMP off all together to get stability and it to even boot. Issues I had were blue screen restarts, and games in playing instantly closing without a crash warning or even a freeze. I mean instantly on desktop. Tried it with many games, and all the same result. Turned off XMP and haven’t had any issues at all.
Hey thanks man. After all the hate I regularly hear about incompatibility on Alienwares this vid helps see things clearly. 1 of my factory Ramranch sticks took a fat shat yesterday. Was feelings pretty butthurt before finding this vid. Liked and subbed. Thnx again.
I just swapped my ram and the pc won’t boot. The Alienware logo on the front is showing yellow and keeps cycling through and doesn’t boot. Any ideas? It does the for the factory ram and well as this ram you suggested on this video.
Somehow bought the same ram, then watched this video. Pisted my r12 and ran fine. Played some games for bout half an hour then one stick failed and hit blue screen. It would post with one of them installed alone, but not the other. I did update bios and other recommended drivers before the crash. Is it likely I just had a fluke bad batch of new ram?
I have the Aurora with Ryzen 7, installed these same ram sticks in the video and selected OC1 in the BIOs performance options to get the correct speed of 3600mhz
I have an R11 i7 10700 10 gen and tried the 4x8 (32gb) 3200mhz and doesn’t work. I just buyed the ram that you are installing in this video hoping that it will work. Thanks for the video.
Love the tutorial, however; you missed the part about resetting the CMOS battery. I installed my new RAM no problems, but my monitor couldn’t pick up a DP or HDMI signal. It turns out you need to take the CMOS battery out, let it drain for a few minutes, and then put it back in. That fixed the absence of display issue!
Can anyone explain why my pc is blinking amber after I completed all steps. My screen is just black and it’s not recognizing my keyboard and mouse. It’s blinking amber twice then pauses for a second then blinks twice again and then pauses for like 3 seconds
I am running 4 Sticks at 64GB and what a nightmare for 3600mhz though. It could be ok on your side but 11th Gen Intel you need to disable all ACC components (this causes RAM Error Loop) change the XMP Profile in BIOS with one stick. Reboot and shutdown, now wait 5 mins and take out the original stick and add one stick at a time, put all back together and reboot then should be good to go.
Hey man, my mother in law has the same PC with 11th Gen Intel. From Dell it had 16GB HyperX 3200mhz ram installed, I had her order identical RAM, same brand, style, speed an CAS. Well she installed them lastnight, PC booted fine, ran fine all night and she was stoked. Then Alienware had an update lastnight which worked an she shut down the PC until today. It would not boot an just got stuck in a memory error loop. Removed the new sticks an boom, booted no problem. I had her go into BIOS an try to turn off the XMP, boot then shutdown, install new RAM an reboot. Now it works, but if XMP is on it won't? The hell am I missing here?
@@riverwarts9084 it’s a mix of things I found. Find out what BIOS it has updated too, look at putting 3 of 4 in and see if it boots even with XMP on, I’m awaiting a new motherboard because even with 4 the same thing happens for me now. But try the 3 then choose whichever XMP has the highest speed setting. Also ensure that no settings under Alienware Control Centre are being used either make sure on the main screen that Overclocking is Off
I know literally nothing about PC stuff but I have an R12 with liquid cooling. Anything I should do differently before opening it up to upgrade my RAM? The 16GB just isn't doing it anymore and I'm definitely upgrading to 32GB at least but purchasing 64GB ('cause y'know, ARK: Survival Evolved).
Can someone help. I’m pretty much a noob at PC’s. So I bought the exact same ram (Vengeance LPX 2x16GB 3600 MHz) and installed as the video says. Pulled up the bios menu and I cannot enable overclocking and I am only getting a speed of 3467MHz. Also checked setting and it says 3467MHz. Anyone have any advice on how to fix this.
@@slooby2473 do you have the R12? On Dell website it says the motherboard can support ram speed up to 3400 only. So maybe that's why. I have R12 and bought the same ram as the video and also only got 3467. I believe there is a workaround to achieve 3600 but I personally wouldn't go for it as it seems to be a lot of work and risk for little improvement
Really enjoying your channel. Waiting for my Alienware PC to come in a couple weeks. Do you have any videos on Understanding or taking advantage of Overclocking, My last PC was made for overclocking(ABS brand bundle) with MSI components but I never used it.
I bought the same ram today, installed it hoping to upgrade from a single hyperX 3400mhz 16g stick to these bad boys in your video 3600mhz however, i was only met with the alien power button flashing yellow and endless turning on and off? hmmm where did i go wrong lmao i know both sticks were sitting flush.
for me it was the ram sticks being loose. it was my first time trying this so i was gentle, but you gotta apply quite a bit of force to get the tabs to fully click in.
I just upgraded my ram with 2666MHz ram but the bios is still showing the old speed (I cant remember what it said without boing back in and checking). how do I change the ram speed?
Great stuff, my problem is when I use Kingston Fury Beast 2X16g no problem but I want to upgrade to 64 G so when I use 4x16 , all s lots with Fury beast my PC R12 doesn't boot anymore.Tried to clear CMOS no go still no boot, my PC start show error,flashing yellow light and shutdown.😕😕. Any hint or help I'll be really appreciated. Thanks.
Thanks for the video, made the swap look easy. I do have one question thought. On Dell website it does not list any RAM supported at 3600 speed, the highest shows 3400. Is there something else i need to do to get it the 3600 work on the R11 or should i find a 3400 ? Thanks again
I’m currently trying this and the Alien button to power up the PC is flashing yellow 4 times and is not displaying any image to my monitor. Any idea how to get it to at least show an image?
I tried adding 32gb of corsair 3200mhz dominator platinum to my aurora r14 ryzen and its not working. All the lights are one but wont connect to monitor or mnk. Any idea on what i need to do?
I replaced exactly the Corsair Vengeance Ram as you did in the video and followed every single step and once I started playing Fortnite, the PC crashed and got a blue screen, then my PC couldn't even boot, so I had to put the old Ram sticks back to the PC and it worked properly as before ... I don't know what I can do with the Corsair ram since they are 3,600mhz and the Aurora Mobo says it only supports up to 3,400Mhz. Do you know how to solve this issue?
My xmp memory is disabled and the bios will not allow me to enable going to try and upgrade the iOS at a later date. Upgrading ram for VRay Maya rendering stability
Injust did this same thing you did but now my alien logo in the front of the case is flashing orange. And it is flashing 4 times which mean ram failure.. some1 help me PLEASE
Why is it that when I fill in all my ram I can never get full speed. I checked all the ram sticks one by one and they seem to work. But when I put them all in at the same time I never get full speed??
I have an I9 3200 ram but bios only has it set to 3000. How do I change that? It was running at 3200 mhz before I upgraded the ram from 32 g to 128 g. And yes I purchased 4 sticks of 32 g 3200 mhz ram
Oh, awesome videos, but sometimes you're talking a little too fast...I am going on 70ty, so I need to slow things down so I can catch it all. But still nice info. keep up the great work.
Thank you so much man! My editing software kept chugging when I had 8gb but then I got 2 16gb rams, but had no idea how to install them. You rock brotha, take my sub and like heheh
I have a question I have right now 16 gigs of ram if I take 8 off and add two 16 gigs of ram I’m going to have 40 do I keep it like that of do I take each one off and only keep the 32 could you help me please I am a noob in pc stuff
So I have upgraded the ram I got with my r14 to 64gb 3600 mghz speed. But it’s stuck at the default 2400 and what I saw in the video isn’t wat I saw in my bios for my pc
i have the r13 and some how i cant seem to figure out how to mess with the rgb lighting for the front face or even the internal if possible any advice or tips??
from the standard Hyper X 3200 to the LPX 3600, is there a noticeable difference/worth it? Very interested...also is this the highest spec you can have? I check crucial scanner and it indicated up to 4400mhz? Cheers
I have an R13, which says that it’s max clock speed is 4400 MHz, but I didn’t see that when I bought 2 6000 MHz 16 GB Ram sticks. Whenever I install the new sticks the computer doesn’t turn on at all, but the RGBs on the sticks still turn on. Is this fixable, or are the ram sticks incompatibl with the motherboard
No overclocking or XMP options on my R15 BIOS. ACC lets me overclock the GPU but no option available for the CPU or RAM. Maybe you need to have the K-series processor to enable the options (I have the 13900F)? I was able to upgrade to 64GB running at 4800mhz (just not able to use the XMP profile). It was very easy to access and change.
what ram did you go with ? been reading alot about how picky the R15 is with RAM .. im thinking about buying the kingston rgb light fury beast 64 gb @ 5600mhz as per the manual says thats the max speed allowed with xmp
Have you guys upgraded the RAM in your Alienware PC, and if so how did the process go?
I followed this one and now my PC crashes ever 5-10min of use
I have the same ram but at 3600mhz runs fine on xmp1
did you end up upgrading to 64?
@@AlejandroLopez-jm4ts if your implying windows 64 bit then it came with the PC
I’m having trouble atm and could use your advice plz. Have the aurora r11. It came with 8gb hyperx fury 2933 ram. I upgrade to 16gb 3200 Corsair’s vengeance. Worked with np. Trying to add 16gb same ram and brand. Won’t load. Reseated? Same problem. What am I doing wrong?
As someone who's never cracked open her PC for any reason, this seems much simpler and WAY less scary than I originally thought. I'm gonna see if I can install these myself, wish me luck!
How did you get on
@@marcusmcfc444 broke his PC and hasn't been on the internet since.
@@malachiashley528 hahaha
So how did it go ?
@@RatioKoil Went well! Didn't need anything too fancy, just popped it open, slotted em in and Presto, no issues
Thank you dude. Your video helped me out. Got a used R9 after my even older R4 took a dump and I upgraded the memory to 32gb and it was good to know what to expect. Older system but it was still dead on. Thanks again!
Hello Gamer Heaven,
I followed your instructions and came up with a few bumps which I solved and hope others will learn from my discoveries. Used the Corsair Vengeance LPX DDR4 (4x16GB for 64GB total RAM). System: Alienware R14 Ryzen (AMD Ryzen 9 5900 (12-Core, 70 MB Total Cache, Max Boost Clock of 4.7 GHz)
So at first the PC would not even see the new RAM. I unplugged the power cord from the rear of the PC, removed the MB Battery, waited a few minutes then inserted the four sticks of RAM, then re-inserted the battery. This enabled me to get to the "BIOS has changed" screen. Here is where it deviates from your instruction...
After getting into the BIOS settings, I changed the "AUTO" setting to "CUSTOM", filled in the pertinent Frequency of 3600MHZ and set the power at 1.36V, clicked on "save and reboot". The machine shut down but NOTHING happened. No happy electrons flowing through semi-conductors, I mean NOTHING. The PC didn't even power up. Evidently it didn't like something in the new setup.
Unplugged from the PC, removed the MB battery, waited a few minutes, removed and reinserted the RAM, powered up and I had 64GB of RAM but running at 2100MHz. Went to REDDIT and found that the frequency needs to be divided by 2! On the BIOS settings, where you put in the Frequency of the RAM, use only 50% of whatever you're trying to upgrade to. In my case, I kept using 3600MHz and the machine didn't like it one bit. I read in another post here that you take the desired frequency and divide by 2. So I did that, used 1800MHz instead of 3600MHz and inserted the desired power of 1.36V, left the other settings at 0 (tCL, tRCD, tRP and tRAS) saved and rebooted. BAM!! Running at 3600MHZ with all four slots used!
Memory: Corsair Vengeance LPX DDR4 (4x16GB for 64 GB of RAM) 1.36V
This helped a ton. To add to it, I found a Dell forum discussing memory overclocking & found this useful comment regarding the manual customization (for 32GB 3200MHz):
“Memory Voltage: Manual
Adjust memory voltage value: 1.38V (If I do 1.39V, I think 3DMark crashed. I may try this again next time)
Memory Frequency: 1900Mhz (NOTE: I started at 1600Mhz, but is stable at 1900Mhz)
Tcl: 14h Clk
Tcdrd: 17h Clk
Tcdwr: 14h Clk
Trp: 14h Clk
Tras: 32h Clk”
after setting these myself, I now have 3200MHz of RAM according to the Alienware control center. 3D Mark ran a benchmark just fine as well.
@@Duck0fDoom Hey I'm trying to upgrade my R10 to 2 16gb sticks of 3200, corsair vengeance brand. I had to use a custom setting to get it to recognize the 3200, but for some reason I cant get any clicks better than 22-22-22-56. i have the voltage set to 1.3v right now. Do I need to up the voltage or do you have any other ideas? btw - using OC1 / OC2 wont boot the PC... hence the reason I'm going custom. Also, the SPD when I checked CPU-Z says it should be 16-20-20-38-58 at 1.35v. Cant seem to manually put in 20's for Tcdrd/Tcdwr/Trp as it only goes to 19.
@@brewskii001 I’ll be honest I don’t know anything about this stuff man, I just did a bunch of googling & read what people who’re smarter than me had to say lmao
But the above solution is what worked for me. I find if you get stuck on something, just google what specific part you’re stuck on & keep reading forum posts. Good luck man
@@Duck0fDoom no worries I’m workin with a r10 so it’s probably more problematic. Just out of curiously what click readings are you getting on your new ram?
@@brewskii001 assuming you meant ‘clock’ reading but according to Alienware command center, 3200MHz, which is what the advertised speed is.
Hey Kevin, I just shucked my R10 this morning. Took out the 5950x, 6800xt, and the 2TB SSD and placed it into my tempered glass Corsair case with RGB fans from a previous build. Looks A LOT better than the R10 case and the cooling is WAY better.
I bought a Gigabyte Aorus X570 Master Mobo and a 1000 watt power supply as well as a Corsair H115i AIO to complete the build. Already had 32Gb of G Skill Trident RGB RAM at DDR4 3200mhz from my previous PC that I grandfathered in to this build. Threw in an old Soundblaster Audigy Rx for good measure to round things out with my speaker setup.
Stay safe with the tropical storm coming our way. Keep up the videos, they're great!
Pretty much did the same thing with my R10... Ryzen 5900, 1TB SSD & GPU from Alienware... Put everything into a Fractal Design Meshify C with an Aorus B550 Pro MoBo I got on as an open box special for $100. 32GB 3200Mhz T-Force RGB RAM. HOWEVER... not to long after that... I was able to snag an Aorus Master 3070 Ti for MSRP at launch... and to my surprise...but not really surprised... the Aorus 3070 Ti performs better than the Dell 3080 (Don't care about mining hashrate). My 3070 Ti boosts higher, runs cooler, is quieter and has consistently higher FPS. It is also more aesthetically pleasing in my case (LCD screen and RGB lighting). I flipped the Dell 3080 card on eBay for $1700 (hate me or not... but I needed to pay back Dell Financial Services for the credit I used to buy the Alienware).
Thanks, just got my ram upgraded in my R12. Thank you for this video. Watched it one time and was able to do my first ever upgrade.
lol i am about to do the same thing today
Just installed 32GB into my Alienware R8! Quick and easy. Love the vidoes! Going to be installing a new NVMe once it comes in the mail.
Awesome. I have an Aurora R8, but the basics are very similar and after only a couple of tries everything worked great and at about 1/3 of the cost of going through Dell for this upgrade. Thanks man.
R8 here too. 2060 as well.
I upgraded the RAM of my Aurora R10 Ryzen Edition from 16 to 32GB. I used the same memory that came with the PC (Kingston Fury 3200). The Aurora did start but only with 2933Mhz. So I made one change in the Performance Option (Memory OC XMP): I changed mem oc2 to mem oc1. Now the RAM ist working fine with the correct speed of 3200Mhz.
Hey, I have the computer, did you just buy two more 8gb sticks of Hyper Fury?
@@Mr.FrodoBaggins In the end i had to upgrade to 32GB oem-memory kit because of some strange startup-behaviour. OEM-memory is the only memory that is guaranteed to work. These Auroras are extremly picky when it comes to aftermarket-memory support.
@@johnnyramone3535
hi...
I have the r10 as well.
Im planning to upgrade & I checked the specs...it says that four 8 gb sticks is not a supported configuration...so I have to use two 16gb or four 16gb.
Maybe thats why u had an issue with four 8 gb.
I did this but it kept restarting and resetting back to 2100 mhz
Finally pulled the trigger on the 32 gig upgrade last night with my mining profits for my r11. Your channel has been a big help for me bud, I appreciate you.
Amazing help. Thank you. And thank you for your humor. It is both spot on, appropriate, and made me laugh throughout my new RAM install. Now onto your SSD upgrade video. Cheers, my dude!
Thank you for this video, I am using it to learn how to open my R11 and install the ram (as well as clean the dust) I myself had gone with Kingston Fury Beast (x2 32gb sticks) I was going to go corsair but dell states fury and xmp as the supported types (I know it works with corsair via your video) but my local store has a "if it works with our PC's but not with yours, it is not defective no refund" so I decided to play it safe and buy the Fury type.
Thank you again so much for the video, I am very computer illiterate and this was very easy to understand with how you were explaining everything and how you have everything time stamped so I can easily find what I am looking for on my phone while doing this.
Kevin you have been a major help for me and I can't thank u enough....
Thank you thank you. You’ve helped me a ton. My daughter and I both have R11’s and I upgraded her ram from 2933 to 3200.
I'm a little late to the party here, but I can speak on why people make a big deal of working on the Alienwares, which is that in the case of memory specifically, not all memory is fully compatible and may not reach full speeds. I literally just spent a couple hours scouring the internet to see what all is compatible, and the answers seem to be pretty inconsistent. Appreciate you doing this show and tell though. Helps to see the RAM you used and that it actually works in a real world scenario.
This video really helped me upgrade the RAM in my R11.
Or at least, it should have. I bought the exact same RAM sticks seen in this video, and had the power button flash yellow four times, indicating a memory or RAM failure. How did you get 3600 mhz sticks to work on a computer rated for a maximum of 3400?
I have the same setup you do and followed your instructions and my computer won’t turn on. I was wondering if I can get your assistance?
Thanks for your video.
I ordered an Aurora R12 RTX 3090, 4 TB, 128GB XMP at 3400hz. Can't wait till it ships at the end of the month.
I probably should have looked this up before hand, but I'm thrilled to say I not only had the same motherboard, but got the same replacement memory 😂 thank you.
I did it today. Working better now. No problems so far. Thanks
Holy cow! You've given me so much information I love it! I'm completely new to the PC community and I just purchased the R12 3070, I would love to learn more about what I need to upgrade and also down the road how to upgrade into a better gpu!
I'm not sure if you can fit anything better than a 3070 into the r12. The newer gpus might be too big for the case, unless you remove your gpu fan. The 3070 is still really good, it will seldom bottleneck your gaming experience.
Btw I bought the same PC as you at the same time as you did! Highfive 🙏
@@andreykravchenko6829 ayyye! I actually sold that and upgraded to a 6800xt! Absolutely beast of a pc
THANK YOU. And whoever said to take out CMOS battery for a few minutes. I doubled my RAM and now have 32 gb and finaly won't have to worry about games. :D
The usage kept steadily hanging on 50% idle and 70% doing light games, but anything like RLcraft, Ark, etc it was 90%.
Time to test the new stick now. 👀👀
When I go into performance options overclocking is disabled and I don’t see xmp😢
THANK YOU THANK YOU THANK YOU I NEEDED TO KNOW HOW TO MOVE THE FAN THING TO GRT TO THE MOTHERBOARD
Thank you for this video. Just replaced the ram in my R9 by following along :)
Subbed. Keep up the content. I’ll be getting an Alienware R10 in the next couple weeks (my first prebuilt) because I can’t get the parts to build my own for reasonable price. Plus I can get a 17% off employee discount :) to further my $$$ I am thinking of doing a certified refurbished, which would give me a 3080 system for about $1600. The only drawback would be if I added an extra fan and extra thermal paste on the GPU, I would be voiding a warranty on a refurbished PC
This tutorial was very simple and easy to follow so I thank you good sir for this!
This guy does a great job of showing you how to get it installed and all but there are many and I mean many of us who did exactly what he did and are having issues. XMP seems to either cause no booting or complete instability when working. I had to put the ram sticks in slots 3 and 4 to work and turn XMP off all together to get stability and it to even boot. Issues I had were blue screen restarts, and games in playing instantly closing without a crash warning or even a freeze. I mean instantly on desktop. Tried it with many games, and all the same result. Turned off XMP and haven’t had any issues at all.
Did u ever upgrade to 64 gb ?? I was looking forward to that and wondering if u gotta do anything different when installing.
Hey thanks man. After all the hate I regularly hear about incompatibility on Alienwares this vid helps see things clearly. 1 of my factory Ramranch sticks took a fat shat yesterday. Was feelings pretty butthurt before finding this vid. Liked and subbed. Thnx again.
I just swapped my ram and the pc won’t boot. The Alienware logo on the front is showing yellow and keeps cycling through and doesn’t boot. Any ideas? It does the for the factory ram and well as this ram you suggested on this video.
Thanks! This will make my late-night "Alternative Cinema" viewing much more enjoyable...
Yes finally another Alienware video
bought an R10 Ryzen 9 5900X & 3080 .. new fans already ordered 🥴
@@CheeceerLP I actually just got a R10 Ryzen 7 5800 and a RX 6800XT ill be ordering my new fans very soon lol
@@BuRstGuardian nevermind, my r10 came damaged so i had to return it.. i now reordered a new one with a 3080ti.. hopefully this one comes in one piece
@@CheeceerLP lol now you've got me worried I hope mine doesn't come damaged 😅
Somehow bought the same ram, then watched this video. Pisted my r12 and ran fine. Played some games for bout half an hour then one stick failed and hit blue screen. It would post with one of them installed alone, but not the other. I did update bios and other recommended drivers before the crash. Is it likely I just had a fluke bad batch of new ram?
I don’t see XMP so I’m not sure if I can get the full 6000mhz for the ram
Hey thanks for this. I have an R11. Haven't upgraded it yet but I do plan on it. This will help, thank you.
I bought mine with 32 gigs. I don't see needing more but if I change my mind this video is a godsend. I wouldn't of known to do this.
I have the Aurora with Ryzen 7, installed these same ram sticks in the video and selected OC1 in the BIOs performance options to get the correct speed of 3600mhz
I have an R11 i7 10700 10 gen and tried the 4x8 (32gb) 3200mhz and doesn’t work. I just buyed the ram that you are installing in this video hoping that it will work. Thanks for the video.
Love the tutorial, however; you missed the part about resetting the CMOS battery. I installed my new RAM no problems, but my monitor couldn’t pick up a DP or HDMI signal.
It turns out you need to take the CMOS battery out, let it drain for a few minutes, and then put it back in. That fixed the absence of display issue!
hey can u help me! installed new ram stick and got no display, took it out now i’m still getting no display with the blinking yellow light
@@DavidGonzalez-mh8pf also you said “new ram stick”, did you only have one stick of RAM in there?
I am beyond frustrated. I just did this cause I’m upgrading ram from 16gb to 32gb 3200 Corsair’s and the monitor still isn’t picking up
@@yakemabrisman7600 , taking out the CMOS battery didn’t work?
Hi, whenever I add more ram into the pc all I get is no display and a yellow light that flashes 4 times
I have R10
When I replace 3rd party ram, yellow light is blinking.
PC does not start. It keep blinking
Can anyone explain why my pc is blinking amber after I completed all steps. My screen is just black and it’s not recognizing my keyboard and mouse. It’s blinking amber twice then pauses for a second then blinks twice again and then pauses for like 3 seconds
I am running 4 Sticks at 64GB and what a nightmare for 3600mhz though. It could be ok on your side but 11th Gen Intel you need to disable all ACC components (this causes RAM Error Loop) change the XMP Profile in BIOS with one stick. Reboot and shutdown, now wait 5 mins and take out the original stick and add one stick at a time, put all back together and reboot then should be good to go.
Hey man, my mother in law has the same PC with 11th Gen Intel. From Dell it had 16GB HyperX 3200mhz ram installed, I had her order identical RAM, same brand, style, speed an CAS. Well she installed them lastnight, PC booted fine, ran fine all night and she was stoked. Then Alienware had an update lastnight which worked an she shut down the PC until today. It would not boot an just got stuck in a memory error loop. Removed the new sticks an boom, booted no problem. I had her go into BIOS an try to turn off the XMP, boot then shutdown, install new RAM an reboot. Now it works, but if XMP is on it won't? The hell am I missing here?
@@riverwarts9084 it’s a mix of things I found. Find out what BIOS it has updated too, look at putting 3 of 4 in and see if it boots even with XMP on, I’m awaiting a new motherboard because even with 4 the same thing happens for me now. But try the 3 then choose whichever XMP has the highest speed setting. Also ensure that no settings under Alienware Control Centre are being used either make sure on the main screen that Overclocking is Off
I know literally nothing about PC stuff but I have an R12 with liquid cooling. Anything I should do differently before opening it up to upgrade my RAM? The 16GB just isn't doing it anymore and I'm definitely upgrading to 32GB at least but purchasing 64GB ('cause y'know, ARK: Survival Evolved).
what if my memory speed doesnt automatically match what's advertised?? in the bios menu it reads 3467 MHz but it should be 3600. i have an r12
Excellent video man, really helped me upgrade my R11.
when are we case swapping??
Appreciate this video im getting a new ram today
I have an R12 and want to add these ram sticks. But Dell says that only 3400mhz is supported on the motherboard. Will these work?
i need to add more memory to a Alienware R13, I9-12900kf unit, it has 2 16gb 4400mz dual channel know. What do you recommend for and upgrade brand?
Waiting for my same new ram to come in gonna throw it in today hopefully
Great content man. Keep pushing
Ive got the r15 and may want to upgrade the ram… cant seem to find a video.
CPU-Z is another sure fire way to find authenticity of RAM speeds/channels/timings
Can someone help. I’m pretty much a noob at PC’s. So I bought the exact same ram (Vengeance LPX 2x16GB 3600 MHz) and installed as the video says. Pulled up the bios menu and I cannot enable overclocking and I am only getting a speed of 3467MHz. Also checked setting and it says 3467MHz. Anyone have any advice on how to fix this.
Did you ever find a fix?
@@evanweiler503 I have not on the MHz of the RAM but I found out my CPU model does not allow overclocking.
@@slooby2473 do you have the R12? On Dell website it says the motherboard can support ram speed up to 3400 only. So maybe that's why. I have R12 and bought the same ram as the video and also only got 3467. I believe there is a workaround to achieve 3600 but I personally wouldn't go for it as it seems to be a lot of work and risk for little improvement
@@devilmaycry0917 yes. I have the R12 and I agree.
Really enjoying your channel. Waiting for my Alienware PC to come in a couple weeks. Do you have any videos on Understanding or taking advantage of Overclocking, My last PC was made for overclocking(ABS brand bundle) with MSI components but I never used it.
I bought the same exact ones. However, it shows 2133MHZ on the task manager. How Do I fix this?
Has the Marine Corps taught me to always say to me and I say to you outstanding Marine, outstanding.
I bought the same ram today, installed it hoping to upgrade from a single hyperX 3400mhz 16g stick to these bad boys in your video 3600mhz however, i was only met with the alien power button flashing yellow and endless turning on and off? hmmm where did i go wrong lmao i know both sticks were sitting flush.
I’m having a similar problem and not sure why as the ram apparently is compatible with this motherboard?
@@saroskies6823 what was this fix? having this issue right now aswell.
what was this fix? having this issue right now aswell.
@purs never got it to work. Shame
for me it was the ram sticks being loose. it was my first time trying this so i was gentle, but you gotta apply quite a bit of force to get the tabs to fully click in.
Your made stuffing two holes look easy !
seems easy watching you do it.
I just upgraded my ram with 2666MHz ram but the bios is still showing the old speed (I cant remember what it said without boing back in and checking).
how do I change the ram speed?
Great stuff, my problem is when I
use Kingston Fury Beast 2X16g no problem but I want to upgrade to 64 G so when I use 4x16 , all s
lots with Fury beast my PC R12 doesn't boot anymore.Tried to clear CMOS no go still no boot, my PC start show error,flashing yellow light and shutdown.😕😕.
Any hint or help I'll be really appreciated.
Thanks.
My xmp memory is disabled and I can’t enable any ideas ????
Mine didn't do that popup thing you said, I checked to make sure the ram was connected properly and it was
Thanks for the video, made the swap look easy. I do have one question thought. On Dell website it does not list any RAM supported at 3600 speed, the highest shows 3400. Is there something else i need to do to get it the 3600 work on the R11 or should i find a 3400 ? Thanks again
They used to all be 3600 mhz on the upper end models
I’m currently trying this and the Alien button to power up the PC is flashing yellow 4 times and is not displaying any image to my monitor. Any idea how to get it to at least show an image?
I tried adding 32gb of corsair 3200mhz dominator platinum to my aurora r14 ryzen and its not working. All the lights are one but wont connect to monitor or mnk. Any idea on what i need to do?
Would the basics of this video relate to an R4 as well? Looking to add/update my RAM for the first time.
Is it possible to add a 3rd stick of ram?
I replaced exactly the Corsair Vengeance Ram as you did in the video and followed every single step and once I started playing Fortnite, the PC crashed and got a blue screen, then my PC couldn't even boot, so I had to put the old Ram sticks back to the PC and it worked properly as before ... I don't know what I can do with the Corsair ram since they are 3,600mhz and the Aurora Mobo says it only supports up to 3,400Mhz. Do you know how to solve this issue?
I just installed a 32G RAM on my Aurora R16. For some reason, it doesn’t allow me to enable the overclocking feature. Why is this ?
How do I know what ram I need? I have the r12 16gb 3070 fan cooled. Which ram do I need exactly
Quick problem I don't see xmp memory on my ryzen. Is it because I got a ryzen cpu instead of an Intel. Is that one of the issues?
Any tips how to increase speed I got Corsair 5,500 but is only running at 4800 … any tips on how to increase speed ????
My xmp memory is disabled and the bios will not allow me to enable going to try and upgrade the iOS at a later date. Upgrading ram for VRay Maya rendering stability
Injust did this same thing you did but now my alien logo in the front of the case is flashing orange. And it is flashing 4 times which mean ram failure.. some1 help me PLEASE
It does t work for me someone please help
When you turn xmp and overclocking in bios and in awcc it crashes and tells you to turn off bios overclock
Why is it that when I fill in all my ram I can never get full speed. I checked all the ram sticks one by one and they seem to work. But when I put them all in at the same time I never get full speed??
I have an I9 3200 ram but bios only has it set to 3000. How do I change that? It was running at 3200 mhz before I upgraded the ram from 32 g to 128 g. And yes I purchased 4 sticks of 32 g 3200 mhz ram
Nice just finally getting different sticks for my r11
Oh, awesome videos, but sometimes you're talking a little too fast...I am going on 70ty, so I need to slow things down so I can catch it all. But still nice info. keep up the great work.
After rams installed, yellow light blinks 4 upon start up
how fast can the alienware motherboard handle for ram in if i got a Gskill 23 GB ddr5 7600 mhz could it handle that
When I click on performance options all that pops up is “overclocking feature” and I can’t click on it
Thank you so much man! My editing software kept chugging when I had 8gb but then I got 2 16gb rams, but had no idea how to install them. You rock brotha, take my sub and like heheh
This guy is amazing. Helped me lots!
I have a question I have right now 16 gigs of ram if I take 8 off and add two 16 gigs of ram I’m going to have 40 do I keep it like that of do I take each one off and only keep the 32 could you help me please I am a noob in pc stuff
So I have upgraded the ram I got with my r14 to 64gb 3600 mghz speed. But it’s stuck at the default 2400 and what I saw in the video isn’t wat I saw in my bios for my pc
I tried to install Corsair Vengeance LPX DDR4 3600MHz 2x32 GB RAM for my Aurora R11. My system is not booting up. Can you help me out?
I'm coming to this video on an R 15 for reminders of steps
I’m trying to boot to USB flash drive to install Windows 10l on a M.2 NVMe with no luck in the BIOS. Any ideas?
i have the r13 and some how i cant seem to figure out how to mess with the rgb lighting for the front face or even the internal if possible any advice or tips??
from the standard Hyper X 3200 to the LPX 3600, is there a noticeable difference/worth it? Very interested...also is this the highest spec you can have? I check crucial scanner and it indicated up to 4400mhz? Cheers
I changed my cpu and now I get the 4 yellow blink lights. Kinda need help with this. It says ram failure but it’s brand new. Any ideas ?
I bought the same ram they do not work with xmp any help?
I hope you see this I am getting a Alienware aurora R16 will the R16 be the same for memory upgrade??
I have an R13, which says that it’s max clock speed is 4400 MHz, but I didn’t see that when I bought 2 6000 MHz 16 GB Ram sticks. Whenever I install the new sticks the computer doesn’t turn on at all, but the RGBs on the sticks still turn on. Is this fixable, or are the ram sticks incompatibl with the motherboard
No overclocking or XMP options on my R15 BIOS. ACC lets me overclock the GPU but no option available for the CPU or RAM. Maybe you need to have the K-series processor to enable the options (I have the 13900F)? I was able to upgrade to 64GB running at 4800mhz (just not able to use the XMP profile). It was very easy to access and change.
what ram did you go with ? been reading alot about how picky the R15 is with RAM .. im thinking about buying the kingston rgb light fury beast 64 gb @ 5600mhz as per the manual says thats the max speed allowed with xmp
I thought alienware can only support 3200mhz speed when i looked up specs on dell i didnt see 3600 supported did this change
Is it the same for an R6?