Honda CB650R | Quickshifter DIY Installation Guide
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2022
- Got a Honda CB650R/CBR650R but haven't got a quickshifter? Fret not! You can now refer to this video guide to install it yourself (for original Honda OEM quickshifters only).
Save money, learn something new and get satisfaction from installing it yourself. If I could do it you could probably do it too.
PDF Guide: cdn.powersports.honda.com/docu...
#Honda #cb650r #caferacer
0.00 - Intro
0.06 - Clutchless shifts
0.40 - B Roll
0.55 - Out of the box
1.12 - Let's get started
1.22 - Start taking off the panels
3.00 - Lift the fuel tank
3.38 - Disassemble of shift mechanism
3.52 - Sprocket cover upgrade
4.30 - Relubricate Racetorx shift assist
4.58 - Disassemble of shift mechanism cont
5.21 - Assemble of new shift mechanism
7.00 - Install new shift mechanism on bike
7.44 - Wiring and connection
8.40 - Putting the bike back together
9.42 - Quickshifter ride, summary & outro - ยานยนต์และพาหนะ
I can’t wait for mine to arrive! Just ordered it a week ago, should be here in a few weeks!
It’s so addictive definitely worth it IMO
Great video and presentation. I'll definitely be using this video as my first reference when or if I install a quick shifter. thanks for your content
Thank you for your kind comment! Let me know if you have any questions or comments on the content when you use it.
I just received the quick shifter. I will install it this weekend. Thank you for your video.
Awesome! It’ll be the best money spent on the bike. Hope you didn’t wait too long for it.
Great tutorial my friend, step by step, I'm saving the video for future reference, thanks!
Thank you! I hope you get your quickshifter. Any questions let me know.
Thanks, bro. Saya puji sebab bro buat video dengan barang yang bagus dan berkualiti macam saya tengok bro buat tutorial pasang Racetorx Shift sebelum ni.
Tq bro beri semangat pada saya. Kalau barang tak padu tak recommend sangat. Ada je barang2 shopee Tapi yang non critical la. Racetorx tu memang padu effect dia tu yg Sy tolong explain.
Really helpful advice mate thank you
My pleasure!!
Great instruction! Did it within an hour with your help. Thx bro 💪🏼
Quick hint: I'm from Germany and got it from Amazon Japan as original part for 120€ instead of 300 bucks ✌🏼
u have a link?
Great video!
Thanks :)
Great video, super helpful!
It was a bit tiring to hear that one song on loop for 9 minutes though :P
Hahah good feedback. I felt it was awkward hearing my own voice babble on for so long so had to put something. Maybe lower volume next time 😊
Bro.Ese funciona también para bajar cambios..y para arrancar se requiere utilizar el embrague
Suara Malaysian ni. Nice video, straight forward. Super clear. Terbalik. Subscribe!
Betul bang Malaysian 🇲🇾 here. Thanks for the subscribe :)
Hi! Do you have a link from where you bought it?
hi, do i need to set RPM value to rev limiter to enable quickshifter to function? coz by default rev limiter value for cb650r is 12500 rpm.. thanks
Hi. Quickshifter is automatically activated once you plug it into the socket. Rev limiter is not customisable by default, unless you do an ecu tune.
Hello.
Can you send me the link where you bought it?
Cool, so no activation from dealer required or ecu flash 👍
No need. It just works straight away after the installation. Still works for me till today so I guess it’s ok.
Great video bro... do you have link to buy the quick shifter?
Thanks bro. Let me try and find the link if they have stock. The webike website is always out of stock.
Nice video.. keep it up.. btw ni up and down or up saja bro?
Thanks bro! Ni up saja. Down pakai clutch mcm biasa.
Hello! I have a question, you installed your racetorx shift spindle but do you still have any false neutrals when you are using your quick shifter, specifically gear 2 to gear 3
Hello. The false neutrals are still there but for me it’s between 1 & 2 never anywhere else. However it’s not so frequent as with the racetorx you definitely know by feel if you didn’t flick the gear lever enough.
@@RUBBERNMETAL yea, definitely need to flick harder in order not to have the false neutrals. We should definitely meet up for tts, sharing and what not. Been a fan of your video.
Não precisa mexer na central da moto?
nice video. What gloves are you using and where can I find them? (website)
Hi. It’s called the Dainese Djado gloves and I can’t find the link anymore from my local dainese shop unfortunately. I guess they’re sold out.
just P&P no need to flash ecu right ? what is the min rpm can be function ?
Yes that’s right plug and play no need to flash or tune etc. The min rpm it can function is 1,500rpm as per the manual but then it’ll be jerky if revs are too low.
@@RUBBERNMETAL oh 1500rpm , sound good , plan to get it . thanks a lot
Does the quickshifter feet with racetorx plz?
Yes it does I have both on mine.
Bro, what kinf of grass did you use ?
What you mean?
can this shifter be installed in cbr1000rr 2016?
Hi. Don’t think it’s for the cb1000r. It’s for the cb and cbr 650r only.
Hi..this one can install at CB650F
I’m not too sure about that bro. I also haven’t known anyone who has done it on the 650F models.
Hello
Does it shift up and down?
Hello. Only upshift unfortunately.
just downshift without the clutch - it's not bad on the engine or gearbox. if you're downshifting so high that you can't clutchless shift easily you're probably going too fast (for the streets) anyway! 😁
No, but you can manually without clutch. While decelerating, press on shift lever, now don't blip the throttle, just increase throttle like you want to maintain speed -- it will fall into lower gear.
Hi how to order from Japan? Is there a link online to buy? Thanks
Is it up and down or just up ?
It’s just up. Down still needs a clutch.
No medistes la distancia
How about the cb650f its easy to install too?
I’m not sure if the same qs works for the cb650f. 🤷♂️
@@RUBBERNMETAL ok thanks
Hi can anyone recommend where to buy from?
Depends which country you’re in. We bike is common or Amazon sometimes when there’s stock.
Sitting here reflecting as to where I went wrong installing it as it a nut and bolt fell off on the freeway 🤦🏻♀️
😮 oh no. That’s always my paranoia whenever I install parts on the bike myself. Hope you figured it out.
Great video but the background music was too loud.
Thanks for the feedback man! I’ll take note on that for my future videos.
Sadece o kadar mı başka parça gerek yok mu
As a lazy dude, theres too much steps 😂
Hehe I get what you mean. Pay someone to do it for you.
10mm? pfff i'm out
😂 everyone should have a 10mm lying around
@@RUBBERNMETALLying around? you can't leave a 10 mil lying around. i keep mine in a miniature vault, and they still escape.
crafty