EVOTECH TAIL TIDY INSTALL | HONDA CBR650R & CB650R
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- I’ve aimed to make this the most simple install to follow on TH-cam, if you’re like me and hating looking at vague instructions online, you’re probably more of a visual learner.
I hope this works for you.
Check out my socials below!
Instagram- / autobay_
TikTok- www.tiktok.com...
Facebook- / autobay-102827061411105
Excellent Bailey. You are so precise and organized making it easy to follow.
This comes naturally to you.
I enjoyed watching and listening to you. Thank you.
Love you. Nana !!!x
Thank you very much 😎❤️ I’m glad you enjoy these without even having to own the bike/car 😜. Love you lots x
One of the best DIY guides I’ve seen in a while!!! Many thanks!!!
Thanks a lot bro this means a lot!! 🔥
Just a heads up for anyone doing this with a 2021 - 2023 model CB or CBR 650.
Honda has changed how the rear fender mounts to the tail, you can view the guide for your bike on the product page. But it now requires you to pretty much strip down the back end to get to the 4 bolts which hold on the rear fender as they are hidden under plastics.. Also a few differences with how you configure the new bracket with the cables and where its routed so just bear that in mind if using this for any sort of assistance.
Quality!!!! I love it. It's not easy but you made it straight forward.
Thank you bro 🙏🏼 I tried my best to make it simple 🤣
Fancy seeing you here. 😅
@@thegamingalex3947 😎 i'm everywhere.
Awesome video! Really clear and concise - and I love that your Nan commented too.
Really appreciate that mate thank you! And she’s always there to support me 😜 🙏🏼
thank you for making this video you made my life so much easier today. cheers from montreal
I’m glad this was useful mate 🙏🏼
Looks mint what a difference 👍
So happy with the result, way cleaner now. Thanks Paul!
so saw your video I BOUGHT A HONDA CBR 650R thought cool I am ordering one tomorrow. will have a wee looky looky abd thought sound m8 nice video.
This video i thought was a real good walk through and has gave me a good video to watch along while doing mine. Thanks bud sub from me, keep the 2 wheel journey going m8y, much love fae Scotland
This means a lot. Safe riding mate. Thank you!!
Thanks for this great video. Nice and easy explained. Cheers from Amsterdam. H.
No problem! 😎 🇳🇱
Im just new to town currently living at swindon, planning to buy one of this monster, thanks for sharing the video, have rang the bell hopefully getting to see more videos regarding to this. Cheers
No problem at all mate! More videos soon 😎
How do you add the reflector?
Lookin much better,really tidies it up 🤙🤙🤙🏴
Thanks very much mate 😎 very pleased! 👌🏼
Great vid, this tail tidy looks 🔥. Just subscribed.
I’m glad you enjoyed mate. Really appreciate it 🙏🏼🔥
Absolutely epic video!! Thank you 🙌
Not a problem 🙏🏼
What an unbelievable price compared to others
Indeed!!
Fantastic video mate… So easy to follow and understand. You explained everything so well, even an idiot like mem can understand it. 😂
All around badass!!!
🙏🏼🙏🏼🔥🔥
Very clear. Thanks!
No problem 👌🏼
Whats the angle of the numberplate on the new plate holder?
I’ve just ordered one of these for my 2023 Hornet, they look awesome quality. What does it look like at night with the evotec number plate light? Did you put a reflector on? I’m not sure whether to or not? Great video pal very helpful 🤘🏻
Sorry for late reply mate! The LED looks awesome at night, I didn’t bother with reflector mate, just make sure it’s on for your MOT 😎
@@AutoBay I’ve got it fitted now and it looks awesome, very high quality compared to the cheaper ones out there. The LED number plate like looks fantastic and unlike some of the cheaper ones I don’t have a white light visible from behind which is great. I did put a small reflector at the bottom which sticks via a 3m pad onto the back of my 8x6 number plate it actually looks ok, I do prefer it without but don’t want to give plod an excuse ya know. Thanks for the reply mate 👍🏻 your video was actually really helpful even though I have a Hornet the wiring was the same and I followed what you did with the clips on the back of the tail it looks factory fitted very tidy. 🤘🏻
Great walkthrough Mate! Shouldn't be the the negative end of the battery disconnected before you start pulling cables apart tho?
Thanks a lot mate! The online instructions never mentioned it pal, I had no issues
Awesome video that helps me so much 👍
Can someone tell me how to installed the reflector please ?
It's awesome ! 😮
Thank you!
great video
Thank you 🙏🏼
Great guide thankyou 😊
You don't need to disconnect the battery? Thank you for the video!
You do not mate! Thank you
Yes mate bike looks lovely, Im torn between this and the mt-07 I was wondering how this one does on fuel? Ive heard that the cbr may drink quiet a bit I was wondering if its as bad as they make out? Do you know what you average for mpg?
Thanks a lot mate! I was also stuck between the CBR and MT-07. In the end I went for the more reliable and better built bike! (And faster of course) but the MT does sound next level 🔥 mine will do from between 49MPG and 65MPG. Doesn’t drink much at all in my opinion mate, but I also own 2 cars so I don’t need to use the bike each day. Purely for fun 🙏🏼
@@AutoBay Thanks very much man! Yeh im also a car driver but I wanted a bike that going to allow me to have fun but also be cost efficient! I would hate for it to drink similar or more than my car
@@joshualuther6646 you might of read about the bad fuel consumption for the 600rr? Because the 650r is known to be very good.
Next video a seat cowl 👀
It’s definitely on the list 😜
That's the first thing I did on my bike was order an oem one and the oem taller windscreen.
Next I'm doing this tail tidy!
I have one more question. Could i bend the tail tidy so that the angle reaches 30°. Is there any chance that i bend it if i apply some force?
I think it’s doable bro 👌🏼👌🏼
Hey, do you happen to have a link for the exact tail tidy you have? As there are many for evotech that i see so far. Thanks in advance
Here bro:
evotech-performance.com/products/ep-honda-cbr650r-tail-tidy-2019-onwards
I assume doesn't fail MOT right??
Can you replace the led bulb on number plate light if it stops working and where can you get the replacement from?
Yes you can 👍🏼 I recommend contacting evotech directly
nice one
🙏🏼
Hi, where did you get the torque settings for the bolts??
I have the instructions but it doesn’t say nothing about torque
Thanks
Hi mate. These were from the owners manual and online forums
where can we find the fine red stickers on the tank
I don’t have any of those screws mine is 2022?
Will be worth contacting them mate, I don’t believe the 2022 model tail is much different than the 2019, I believe you should have screws with yours
Should you loctite the bolts back in?
does this fit the 2023 model?
Where do you get it?
Evotech’s website mate
is this allowed in germany? is it legal?
It’s perfectly allowed in the UK. I’m
Not sure about other European counties however
@@AutoBaydo you have a paper with the specs or something?
Mate top video so informative gained a sub from me respect
Much appreciated mate 🙏🏼
where can we find the fine red stickers on the tank