Hi, This may be a dumb question. Can this be done without dropping the whole trasmision? I am in need of the conductor plate due to a stripped female end in the plug adaptor on the plate. Is it more involved than just pulling the next layer after the transmission pan?
Yes you can. There's one bolt who will cause trouble, just use a standard torx key. Do not forget to loose the connector pin bolt or you can damage the entire hard copper wiring system (in my own experience, almost did x_x).
Hi, This may be a dumb question. Can this be done without dropping the whole trasmision? I am in need of the conductor plate due to a stripped female end in the plug adaptor on the plate. Is it more involved than just pulling the next layer after the transmission pan?
Yes you can. There's one bolt who will cause trouble, just use a standard torx key. Do not forget to loose the connector pin bolt or you can damage the entire hard copper wiring system (in my own experience, almost did x_x).
Is this the same valve body as 2017 wrangler? 3.6 also would you know the solenoid name
It might be but double check with dealer
12-18 same part
I have a bad solenoid in my 2014 wrangler. Do I need to replace the whole valve body or just solenoid?
Usually just the bad part
What’s a fair price for this repair
Where's the TCC solenoid in this please?
Sorry not sure
The bolts that hold that pan on are super fragile.