How to change a Citroen C3 Picasso rear brake disc / rotor and wheel bearing.
ฝัง
- เผยแพร่เมื่อ 6 เม.ย. 2022
- John from to the garage and his brother Alan, show how to change the Rear discs / rotors on Alans Citroen C3 Picasso 1.6 HDI. This is a little more challenging than the average disc swap as the wheel bearings are incorporated into the Disc. This makes the discs a little more expensive a and a little different to swap but its pretty easy once you know how. You will however need to have a 36mm socket and a calliper wind back tool to complete this task.
Here are some links to appropriate products on amazon for your convenience.
Discs. amzn.to/3KhC6uH
Pads. amzn.to/3Kgo3FWSocket
Wind back tool amzn.to/3DJ2M5f
Brake cleaner. amzn.to/3LJiHTR
Please subscribe and click the notification bell. If you wish to support our channel, why not buy a sticker or other item of our merchandise. This link takes you to the 'To the Garage' shop. www.tothegarage.co.uk/shop
“When you click on some of the links provided in this description, or on the website, and then decide to go on and make a purchase, this can result in this channel earning a small commission when you make qualifying purchases. Programs and affiliations include, but are not limited to, the "eBay Partner Network.” and the "Amazon affiliate network" Using these links does not increase the price that you pay in any way.
Thank you for supporting To the Garage.”
Intro, Outro and bed, theme music were written by Craig Blundell. They are his copyright and provided to ‘To the Garage’ for its exclusive use. They may not be copied or used outside of ‘To the Garage’ TH-cam channel without his written permission. - ยานยนต์และพาหนะ
Nut socket abit loose as i know c3 uses 35". Good video.
A very informative and good video. I'm doing my brakes according this
Glad it helped
I went "ouch" when Alan slipped off the hub nut when tightening it (and yes, I have done the same thing many times!). You probably did not have the room but I would always try to pull up against the weight of the car when doing those up rather than trying to push as Alan was doing
To be fair Mike, we probably did have the space to pull. A good tip and one I will use so that I dont hurt myself (as often😁)
Thanks for watching and taking the time to comment Mike👍
Excellent guys thank you. Extremely helpful and interesting
You are welcome. thanks for watching
Great video 👍
Thank you
I recently purchased the halfords advanced torque wrench. In my opinion its a superb tool and well worth the money
Love the Halfords Advanced kit. No nonsense good quality tools that you know are not just trading on a cult brand name
Neat design, having the bearing built into the disc, although I expect it pushes the price up somewhat. Had to replace a rear wheel bearing on my E class a couple of weeks ago after failing to get the M-B ‘Stealer’ to replace it as it’s just a bit out of warranty (despite the fact that I reported the developing whine whilst it was covered and they did nowt. What a pig of a job, especially as the bearing had welded itself the the carrier on the shaft. Ended up cutting the rotten thing off. Really glad that I was able to borrow a two post lift and full workshop as well as having experienced help from my daughter’s boyfriend. Still, job done and silence restored now. Next to replace the Nox sensor which has an intermittent fault. On back order with M-B and will cost £360 plus Vat! Ouch.
They are more expensive. (circa £90 a pair when I would expect 50 a pair for similar sized standard ones. But on the up side you know the well bearings were changed every so often.
I would have happily paid double if I could have magically made the elgrands wheel bearings come off with the disc😁. Nice to hear that its not just the Jag that has a few daft priced parts.
@@ToTheGarage £110 for a spurious M-B wheel bearing. £90 for two bearings with discs thrown in for free sounds like pretty good value to me! Incidentally, had some aluminium 30mm spacers made up for the XK8 as I’ve never been a fan of the fuselage inset look of the rear wheels on the earlier x100s. Nicely manufactured, perfect fit on the hub, looks great and I think they even improve the handling. £145 for 4. Bargain!
@@gerardbooth40 Have you got a before and after shot Gerard?
@@ToTheGarage how strange you should ask John. Check your email…
This is not a complicated job, but make sure you have a 36mm socket on hand before you start👍
My head gasket is leaking, would you happen to have a video of how to replace the head gasket? ty
loved the video great job!
Wanted to see how you winded piston back.
Hope this helped
hi good video. can you tell me what the torque settings are cheers
is the torque setting 300 Newton metres
270Nm
I was told you cannot change the disks without replacing the hubs. Is what I am looking at on your video the hub which the mechanic would have referred to?
Hi Lorraine. You can't change the rear disc without changing the bearings as they are integrated into the disk. But the Hub is the short shiny shaft you slide the disc and bearing onto. That does not HAVE to be changed to change the discs. It CAN be. It would be quicker and much more expensive to do it that way though.
hi good video is the nut a 36mm at 300nm
hi Kev yes. so a good six sided socket is recomended👍
36mm 270NM
Thanks for sharing 👍😊💜✌️
Can I ask please, where did you purchase the new nut, lock ring and dust cap, is that main dealer only?🤔
My dad's needs doing, I told him that it's false economy to replace just the pads, the C3 Picasso rear discs always seem to score badly, not sure why, they seem worse than other brands that we've owned. A set of discs and pads are a must especially as the handbrake needs to grip well too.
I was considering EBC black stuff and their basic discs so as to come up from the sketchy OEM quality.
The new nut and dust cover come with the new rear diks
👌
Thanks Udo
10:23 Does it need grease between the rod and the wheel bearing?
Can I ask for the rear pads is there no need for any vopper slip grease on the back on the break pads....like the front ones? Thanks mark
Copper
I always do it. Stops them rattling
The tool for pushing the caliber back. Is it special ?
It has a left handed thread. So pretty special
Universal tool but not everyone has one
Hi, do you know if this is the same set up as is on a 2018 citroen c3?
I believe so
Why doesn't the disk rotate whilst you undo the bolts? How do you stop it just spinning, because the handbrake cannot be on?
Hi Dave. if you mean the wheel nuts, i loosened them while car was touvhing the floor. if you mean the hub nut, it tightens onto the stationary stub axle rather than the disc
Be warned you may need an impact wrench to get the hub nut off. Using a 36mm socket and breaker bar, no movement at all. Halfords wanted £800 to do all four wheels!
Hi guys what is the torque set to please
Is the torque setting 300 Newton metres
Close. 270 Nm
I do this manipulation and everything its great , but the esp and abs is disconnect !why ? How i can reset it ?
Did you buy the wrong discs? Some come with or without abs
Is it me or did anyone notice the off side shock absorber leaking?
Im hoping its just you 🤔. but now will have to check. Thanks👍
Trying to do this on my friends car and the torx bolts were a terrible choice. They've turned to chocolate.
Its always the fittings that make these jobs difficult
Jaaaag
Sorry piston that is.
halfords want me to charge 1400 for similar repair
Well thats about 12 hours work at £100 per hour even if we assume they are charging you £200 for the parts! It took me about 4 Hours and im an amateur. Thats an insane fee!
Wow, tell em to F off
I would suggest that means that they don't really want to do it but are prepared to 'Give it a go' on your car